Question about 2005 Toyota Corolla

1 Answer

All gauges work with ign switch on have check power to startes has power somtimes an cranks sometime wont crank went it dont crank no power to starter also check new safety switchin check fine also check key switch at back of ign switch where harness hooks in all check good showed fire on starter wire at switck ever time key was turned

Posted by on

  • 411will Sep 10, 2009

    check stater it will have power to it one time an then again it will have no power ,anmaybe the nexttwo or three times it will have fire to starter an crank

  • yadayada
    yadayada May 11, 2010

    little confused by what u are trying to say here, sounds like a defective starter solenoid to me, but need you to restate in clearer english.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

Make sure battery cables are tight and posts of battery are not loose

Posted on Sep 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 chev cavalier yesterday the car wouldn't even turn over. Today nothing happened on the first crank then started on the 2nd crank no problem. later turned over not a problem at all. Any ideas??


Next time it doesn't start, move the shift lever to NEUTRAL. Then try to start. If it cranks in neutral, that would be a sign of a misadjusted cable or bad transmission park/neutral switch. Could also be a bad ign switch or other issues. If the shifter doesn't help checking for power at the starter when turning the key to start. If no power, work backwards to the IGN switch

Jul 20, 2017 | Chevrolet Cavalier Cars & Trucks

3 Answers

Geo wont start after running dry


Hello, I would replace the fuel filter. Sometimes the sediment gets sucked up by the fuel pump when run out of gas and clogs the fuel filter. Good luck.

Aug 21, 2015 | 1992 Geo Prizm

3 Answers

I have a 2004 Chevy trailblazer no start no crank but if I put key on hot wire the starter it will start I replace new ignition switch and new starter relay b


Before you do any thing check for loose or bad connections. Also check you ground connection to engine. Check Fuses, relay and for a Fusible Link open circuit. Now let me explain what a Fusible Link does. They are short lengths of small gauge wire installed between the Battery and the Ignition Switch, or the Battery and the Fuse Panel. They'll melt and open the circuit before damage occurs in the rest of the circuit. I hope this was helpful you.

Aug 09, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

I have a 1995 dodge van which wont start due to no spark I have tested right at the coils sec. I do have injector pulse but no pulse at ign coils primary there is power at primary of coil at first we...


A test light connected across the coil primary leads should flash on + off when engine cranks(coil sparks when 12v turned OFF due to collapse of magnetic field).If you get pulsed 12 volts,and no spark from the coil,the coil is bad.If you don't get the pulsed 12 volts,trace back to find out why(the PCM turns the coil ground on and off,12 volts comes from switched IGN source)

Sep 17, 2011 | 1995 Dodge Ram 2500

3 Answers

My 99 Gmc jimmy will not start. the fuel pump is good the fuel filter is not clogged, i replaced the neutral safety switch, plugged in my code reader no codes, i believe it is the starter or the ignition...


Does it crank or not? If no crank then look at the starter or ignition switch. If crank but no start then look at the ignition system. Check for spark at the plugs and also check the fuel pressure. If there is spark try spraying a little starting fluid into the intake. See if it starts and stays running. If it stays running reply back and I will explain why.

Sep 02, 2011 | 1999 GMC Jimmy

1 Answer

The last couple of week the gages somtime will not work somtime its all of them sometimes its only the speedometor. Now it will not start is a 2008 chevy impala ss


Sounds like a power loss issue than a gauge problem if all are cutting out and especially if you can't start. This could be numerous things but off the top of my head I'd say you either have a short to the computer, computer dying or bad ASD relay but might be called something else on that car, like MFI relay that shuts everything down. Only other things I would relate to this and usually causes stalling is the crank and cam shaft sensors. They don't give a signal car dies and/or car wont start. Does your check engine light come on when you turn the key to ON (not starting)? If it doesn't come on for the 3 seconds then you computer has no power, shorted out or dead.

Sep 02, 2010 | 2008 Chevrolet Impala

2 Answers

Truck randomly won't start. No clicking, no nothing. Has a new battery, starter relay, ignition switch, etc. Someone told me to replace the clutch switch/neutral safety switch. I bought a neutral safety...


when it wont start, turn your headlights on, see if they work if they dont, find out why. When it wont start, take a wire from the positive battery terminal and touch it to the small post on the starter solenoid, it should crank. If it now cranks, theres a problem between the ign switch and the starter solenoid.

Jun 11, 2010 | 1984 Ford F 150

1 Answer

78 chevy caprice wont crank over, lights work and when i turn the key, the lights dont even dim. i get no response when i turn the key


check the small wire at the starter to make sure that its gettin power when you have the key turned all the way like you were gonna start it. if no power it is probably the ign switch. but i would say that you have a loose wire or broken wire. check all fuses

Apr 03, 2010 | 1978 Chevrolet Caprice

2 Answers

At times cranks and runs fine other times it will not crank


Hello edspring1...the little key chip you mentioned is the onboard security system for your firebird...GM called it the VAT system..it's possible this could be the cause of the no start conditions, sometimes they will reset if you disconnect the negative battery cable for 30 mins.
I really dont think that is your problem though...under the steering pillar...there is a "slider" type ignition switch...meaning...the terminals slide togather to make contact when the key is turned...these darn things get worn to a point they start arching and eventually wont make contact at all...i replaced one last week on a 95 firebird that had the same problem you are describing now.
i'll post a pic of the slider set in position for a tilt steering and non-tilt column....note the difference.
Good luck...i hope this helps...please rate me a fixya.

0f4f95b.jpg

Jun 23, 2009 | 1994 Pontiac Firebird

Not finding what you are looking for?
2005 Toyota Corolla Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...