Question about 2003 Ford F150 Regular Cab

1 Answer

I have a 2003 Ford Super Crew with the keypad entry on the door and only one key. I purchased used and don't know how to reset the keypad entry. Can you help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 984 Answers

The keypad code you are using, might be the factory code, and you would have to set a personal code. Directions for this are in the owners manual on page 85.
If you do not have a manual, a PDF version can be downloaded from Ford :

https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

If you do not know for sure if you have the factory code ( via the card in teh owners manual ), you can read the factory code from the tag on the CSM ( Central Security Module ).
The CSM is a white / off white colored "box" ( ~ 4"x3"x1" ) located up behind the dash.

Laying on the driver's side floor, so you can look up behind the dash, you should see a white box with a sticker on it that has 5 digits on it. This is the factory code to be used with the directions to set a personal code via the directions in the owners manual.
In the picture, you will see the white box up in the left hand corner of the picture, this is the CSM with the sticker on it. The left hand side shows the parking brake ratchet, as a reference point. Bit of flexing around, but once you get on the floor with your head under the dash ( and a flash light ) it will be easy to see.I have a 2003 Ford Super Crew with the keypad - 9742ddf.jpg

Posted on Nov 05, 2009

  • Steve S
    Steve S Nov 05, 2009

    Forgot, as soon as you get a chance, have another key ( or 2 ) made for your truck.
    Locksmiths will be able to clone the RFID tag in the key you have, so they will be the same key, and not function for programming a new key via the owners manual, but it will save you a trip to the dealer if you loose that one.
    Best to have 2 made now, else the dealer or a locksmith that has a PATS programmer will be your only route, an this will cost quite a bit more.


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset keyless door entry that is in lock out mode


Viper Keyless Entry Systems

https://www.viper.com/car/keylessentry/
Viper is the industry leader in keyless entry systems. Add the convenience of keylessentry to virtually any vehicle - even vehicles without power door locks!

Alarms, Remote Car Starters, Keyless Entry & Locks - JC ...

www.jcwhitney.com > Audio, Video & Electronics
20 out of 32 products in Alarms, Remote Car Starters, Keyless Entry & Locks ..... ofKeyless Entry & Car Alarms allow you to lock and unlock power door locks.
How to program your keyless entry keypad - Ford Ownerhttps://owner.ford.com/.../locks.../how-to-program...Ford Motor CompanyDiscover how to lock and unlock your doors and how to program memory settings that will adjust seats & mirrors for each driver.SecuriCode™ Keyless Entry Keypad - Ford Ownerowner.ford.com/.../locks.../securicode-keyless-entr...Ford Motor CompanyLearn how to set a 5 digit SecuriCode on the Ford keyless entry keypad. ... Sign out. Register/Sign In · Your Vehicle. Service & Maintenance. Service & .... vehicle's SecuriCode keypad to lock and unlock your doors without having to use a key. ... Thekeypad will go into an anti-scan mode if you enter the wrong code seven ...How Programming Your Keyless Entry Can Make ... - Ford Life

Jan 08, 2016 | Cars & Trucks

1 Answer

Poor mpg on 2003 f150 ford5.4 4x4 super crew


if you are getting about 14 on average no matter what you do it will not improve, Don't fall for any misleading claims because nothing you add will work. It takes fuel to make power the only improvement i have seen is by reprograming the computer but you must loose power in order to save fuel.

Apr 07, 2012 | 2003 Ford F150 Regular Cab

1 Answer

How do you reset a '03 Ford F250 security system?


disconnect the positive cable on the battery for 10 minutes. this will reset the trucks computer and the security system.when you reconnect the battery, you'll need to lock the doors and unlock them.with the key , usually locking the doors manually with the key does the trick,but if you've already done this,try disconnecting the battery for 10minutes. that should do it for you. if your batterys weak,your security system may go off to alert you that somethings wrong. if it resets,suggest you have the battery tested or being bad. thank you for choosing fixya.com!

Mar 27, 2011 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

I have a Ford F250, 2002 super duty v-10. My battery died and I tried jumping it but the alarm sounded. (I never received the push button entry thing). I bought this truck used and need to know how to...


Depending on the alarm system, there may be a valet button under the dash on the driver's side near the stearing column. You will need to put your key in the ignition, turn the key to the on position and then press the button in.

Oct 21, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

2003 ford f350 lariat crew cab drw speedometer not working


http://arrc.epnet.com/autoapp/8687/chiltonimages/8687/86876136L.gif

Jul 09, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

Cant find the blend door actuator on 2003 ford f150 super crew


The temperature blend door actuator is located on the right side of the transmission hump under the evap. case. The floor ducts cover it.

Jun 21, 2009 | 2003 Ford F150 Regular Cab

1 Answer

Key Pad Entry does not work


does the key pad light when you press a button at night? If yes, the fuse is ok.
Do you have the plastic card with the permanent code in your owner manual packet? If yes, tryit.
report back.

Keyless Entry The keyless entry keypad is hardwired to the GEM. The GEM interprets the inputs from the keyless entry keypad and then controls the associated operation. The keyless entry keypad will be illuminated for five seconds when any button is pressed. Additionally, it will request the illuminated entry feature to turn the courtesy lamps on. If a lock all doors code is entered, the illumination will turn off, as well as request the illuminated entry feature to turn off the courtesy lamps. When pressed, the keyless entry keypad supplies the ground signal to the GEM or the GEM receives a signal from the keyless entry remote transmitter. Then the GEM outputs a ground signal to the appropriate lock or unlock relay which supplies the power to the actuator to lock or unlocks all doors, including the luggage compartment. The keyless entry remote transmitter also unlocks the liftgate or activates the panic alarm by sending a signal to the GEM.
--------------------------------------------------------------- Visual Inspection Chart Mechanical Electrical
  • Keyless entry keypad
  • Keyless entry remote transmitter
  • Central junction box (CJB) Fuse F222 (20A)
  • Circuitry
  • Generic electronic module (GEM)
------------------------------------------------------------------------
  • No communication with generic electronic module (GEM)
  • Generic electronic module.
  • Circuitry.
  • REFER to Section 419-10 .
------------------------------------------------------------------------------------

Mar 08, 2009 | 2003 Ford Taurus

2 Answers

Keypad keyless entry code missing


Ford has an add on keypad also if it is pretty much flush on the door it is factory if it is a fat keypad it is an add on The factory module is under the dash by the fuse panel the number should be on it

Oct 15, 2008 | 2006 Ford F 350 Super Duty

Not finding what you are looking for?
2003 Ford F150 Regular Cab Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...