Question about Jeep Grand Cherokee

2 Answers

2000 Grand Cherokee Larado. The hydrolic arm will not hold the b

2000 Grand Cherokee Larado. The hydrolic arm will not hold the back window up. Any quick fixes?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same thing happened on my 2000 limited, replaced the arm (like 10 bucks I think) no more problems.

Posted on Sep 11, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 677 Answers

These are the gas struts.There is shops that will fix them or you buy them as an exchange unit(Your old ones for their new ones).Quickest fix is a broom handle:) Hope this helps

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change thermostat on 4.7 2000 jeep grand cherokee larado


Passenger side, front of engine, where the lower hose comes out of the engine, its behind the black plastic thermostat housing that is bolted to the aluminum front timing chain cover. Two bolts hold it on, 8mm socket gets them off.

Jul 13, 2014 | 2000 Jeep Grand Cherokee

1 Answer

Have a 2000 Jeep Grand Cherokee Larado with a blown head gasket. The problem is we have lost the key and no garage will fix the head without a key and the dealership can't program a new key withou


First I would check with a different dealership. you will be required to provide only the VIN and probably some verification that you own the car, but the dealership can make a key and program it without the car even being there. I hope this helps.

Oct 05, 2012 | 2000 Jeep Grand Cherokee

1 Answer

How to take off the rear windsheild wiper on a 94 grand cherokee


You will need a 13-inch wiper blade for the rear window. 1 - When removing the wiper blade lift the wiper arm away from the window. ----- 2 - With one hand holding the wiper arm press the small tab on the underside of the wiper blade where it meets the wiper arm. ----- 3 - Slide the wiper blade off of the arm by pulling the center toward the bottom of the arm.----- 4 - Lightly lay the wiper arm on the window.----- 5 - Prepare your new wiper blade by taking the curved part of the plastic clip and line it up with the curve of your wiper arm. ----- 6 - Lift the wiper arm and press it through the center of the wiper blade up and over the plastic clip. 7 - Pull the wiper blade up until it clicks. Place the arm back on the window.

Jan 11, 2012 | 1994 Jeep Grand Cherokee

2 Answers

Fuel pump seems to have gone out on my 2000grand cherokee larado trying to check pump fuse but don't know which one it is, because fuse box cover is missing


on the 2000 jeep cherokee fuse diagram was not included. makeing it hard in case of a short curcuit. fuse # 11 is a 20 amp. for the fuel pump relay. 97 to 2001 jeep cherokees. hope this helps !2000_fuse_box.jpg

Jan 29, 2011 | 2000 Jeep Grand Cherokee

1 Answer

I need to know where is the craftshaft sensor for 2000 grand cherokee larado


It's located near the transmission and engine, where they meet. Under the vehicle, driverside. It;s easy to replace and takes like 5 min. Your Jeep must be cutting off. If you can't find it let me know, and I have a manual on the Jeep, I will scan the picture and info, and send it to you through here or e-mail.

May 15, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Idle speed goes up and down


sounds like it might be your egr valve

May 02, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Jeep wont start


The crank position sensor is on the bell housing of the transmission, very hard to see, on passenger side, below the valve cover, depending if it is an early 2000 or a later 2000 model.

Mar 31, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...