Question about 1999 GMC Yukon

1 Answer

99 gmc yukon daytime running lights dont work checked the fuse but not blown dash indacator shows it is on but are not please help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 57 Answers

Make sure Parking brakes are fully released and then check the diode under the dash, drivers side above right foot, remove diode and shunt tyhe connection if lights lite diode is bad. These diode reduce the power by 25% and are prone to fail

Posted on Apr 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 chevy suburban high beams work, low beams and daytime running lights don't. checked all fuses none blown, dont know how to check relays except to replace each one, one at at a time.


with a test light back probe the green wire behind the low beam then if test light on = bulb defect
the blue one is for daytime running lights example : if 1 bulb is burn or open no daytime running lights
p.s. you need to have 2 bulbs the same or it won't work

Aug 05, 2013 | 1996 GMC Suburban

1 Answer

Daytime Running Lights not working in my 1999 GMC yukon SLT


IT is module could be expensive for Grand Prix cost $500.00

May 05, 2017 | 1999 GMC Yukon

1 Answer

99 ford contour daytime running lights work, but high beams do not.


I live in Australia & I don't fully understand the term " daytime running lights " but high beam & low beam lights are on separate fuses as is the parking lights so you probably have a blown fuse, check all the fuses in the fuse box......hope this helps......cheers.

Jul 05, 2011 | Ford Contour Cars & Trucks

1 Answer

I just installed a new break switch for my 99 yukon gmc and now the gear shift won't work?


is it working? are the brake lights working? is there a blown fuse? why was the switch replaced?

Jul 01, 2010 | 1999 GMC Yukon Denali

1 Answer

Needing to know why my Yukon's gauges stopped working.


You need to replace cluster, 99-02 Silverado GMC all will work even if it has a trans temp truck is pre wired for it. I put a 02 Denali cluster in my 01 silverado no problems. GM can reprogram hours and odometer if you want.

Mar 10, 2010 | 2000 GMC Yukon

1 Answer

Daytime running lights and blinkers do not work


the lights are controlled by a module, it is the DRL module, replace it. also try this
On the inside of the car next to the light switch there is your dome light button. GM made it to where you could turn off the daytime running lights by pushing it three times in and out. Turn the vehicle on then do this. Your daytime running lights should work after this.

May 14, 2009 | 2005 GMC Yukon Xl Denali

Not finding what you are looking for?
1999 GMC Yukon Logo

1,174 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...