Question about Oldsmobile Cutlass Supreme

1 Answer

I dont know i got thru or not , im not use to this process,i want to ask a expert about the 1991 olds not running

Posted by on

  • 2 more comments 
  • paul Sep 10, 2009

    this car was running ok, would not run one morning, there was no spark what so ever , fuel pumps out of the valve on the fuel rail, checked fuses behind glove box, and under hood, ecm fuses etc fuel pump ecm relay, replaced the crank shaft postion sender as there was no continuity, thought that would be the problem, now the car will fire once ,and the, spark disapears. one spark only, rechecked some fuses again but gave up for now as of the time involved, guy went and bought a nother beater to get to work ,firist thought was no fuel, but , it is as though the engine moniter or what its called wont take over the job odont remember any light on the dash and dont have a db1 scan tool 1991 old cutlass supream

  • paul Sep 10, 2009

    thanks for the site on the codes i prited this off and will keep it on file, will have to get a db1 scan tool but will try this other route firist , thanks paul

  • paul Sep 10, 2009

    have replaced sensor and chacked wire fires once now but thats all

  • paul Sep 10, 2009

    had trouble navigating thru all the links etc poated my problen on different parts of the page

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Oldsmobile Master
  • 77,514 Answers

You need to give me full details of what the problem is, has the fuel pressure been checked? if that is ok is the spark ok to the spark plugs, do you have any trouble codes? here is how you run a computer trouble code test, go to the link below.
http://check-engine-light-codes.blogspot.com/2006/03/gm-1983-95-vehicles-obd1-codes-self.html

Posted on Sep 10, 2009

  • yadayada
    yadayada Sep 10, 2009

    I am a OLDS dealer tech of 10 years and there is a check engine/service engine soon light in the dash, u have to run the test to figure out the problem, the tool to read direct is called a OBD 1 scanner, they run about $100, if you want a guess the crankshaft position sensor has failed

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Im trying to install a push to start button to replace ignition switch can this be done


Don't know about the 1991 because we just bought ours today, but we asked our fantastic mechanic to install one on our 1993 Sidekick and it has worked like a hot **** for two years now. Just find a good mechanic who doesn't need to operate inside the box.

Nov 15, 2011 | 1991 Suzuki Sidekick

2 Answers

I had the power steering pump replaced and they did not replace the hose that the fluid runs thru, and i dont know where it goes


There are two lines. One is a high pressure and one is a return line. They both run from the pump to the steering box.

Apr 01, 2011 | 1991 Lexus LS 400

1 Answer

Hi i have a 1991 Mitsubishi mighty max 3.0L 4WD. I just got it running today. Its making a ticking noise when idling. I think it was doing this before but im not shure. I dont want to damage anything. I...


well the lifter is a problem, your better safe than sorry cause if you don't tear it back apart and check the lifters then all that work you did is gonna be history.and you will be doing it again, i'm sure you know this. do this before you try to solve the ticking.

Feb 06, 2011 | 1991 Mitsubishi Mighty Max

1 Answer

I dont know what to do i love my car but my motors going i nd a cheap motor i bearly have funds im depressed


you dont say what is wrong with the engine but as they are simple to work on when out of the car,and you dont have to replace all the bits,just the ones that are worn, invest in a haynes manual and take your time taking out the engine and rebuilding it,if you do it,and it runs sweet when you restart it after, it feels great.....or get an engine from a scrapyard and take a chance it works.you can allways ask an "expert" on this site for how to.....
giving instructions from start to finish for a complete rebuild would take several pages...

Jul 31, 2010 | 2000 Lincoln LS

1 Answer

My 1991 Dodge stealth is overheating. I have a new radiator and thermostat installed.. No fluid is leaking and my fans are working. It typicaly runs hot when im sitting still or start traveling long...


Hello Guest and thank you for asking your question, on Fixya.

Here is a simple process that will walk you through a few steps that will pinpoint the overheating problem on your 1991 Dodge Stealth, without even using any tools. It has helped millions of people, and I am certain that it will help you, because I wrote it for people like you. So here is the link:
How to diagnose your overheating 1991 Dodge Stealth

Get more great, money saving, tips and tricks about your vehicle from: twitter.com/acoates23234

Thanks for the vote, and good luck!

Jul 13, 2010 | 1991 Dodge Stealth

1 Answer

How do your replace the oil pan gasket on 1991 Isuzu Trooper 4x4


Its pretty simple. I recommend draining all the oil out first, and then simply take out the bolts on the pan. There should be about 12 or so small ones. Take the old gasket off and I would recommend putting the new one on the oil pan and put the screws thru the holes in the gasket, put the oil pan and the new gasket onto the block and scre the nuts back on. To make it easier on you do the four corners first, and then the rest. Just make sure you dont over torque though! Let me know if you have anymore questions, let me know! Happy motoring!

Oct 19, 2009 | 1991 Isuzu Trooper

1 Answer

Check engine light comes on code reads (engine A/T)


wow 1 year old, you probley got tierd of waiting and got it fixed by now. im new and starting with check engine help. when you post ,you need to post with the code and what it says. im sure that you know that most of the major chain auto stores will check your code for free ,and get the print out or write down, they also give you a list of trouble shooting tips.
in my standerd list i dont have anything that says engine a/t
i will give you an exemple of whats needed when you post.p0115 thru p0118 all deal with the engine coolant temperature ECT but each specific code tells high or low voltage or just a malfunction in general or that its working and not with in the set limits.so if you try another post give all the code and what it represents. hopefully you will get a better response
looking my help statistics there are currently 18 experts and over 5000 problems to solve. im starting at the back and working forward

Apr 07, 2009 | 2001 Kia Optima

2 Answers

I have a 1991 300ce and the heat stopped working


The blower is mounted under the hood beneath the cowl panel. There is a blower regulator that could have gone bad or it is indeed a bad motor. Also have you checked your fuses?  This post is old. Has the problem been fixed? If so I am sorry no one took the time to help you here. If you still have a problem I' be glad to assist you any way I can. Just let me know.

Dec 03, 2008 | 1991 Mercedes-Benz E-Class

1 Answer

1991 ford f-150


Sorry, I am a tv expert, dont know anything about cars, you will get a better response if you direct this to a car expert.

thanks,
tim

Sep 28, 2008 | 1991 Ford F150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...