Question about 2000 Chevrolet Blazer

2 Answers

2000 Chevrolet Blazer The hood release cable broke right where the cable goes into the lever. The little piece at the end of the cable is still in the lever. I tried to pull on the cable using a pliers to open the hood but it won't budge. The cable needs to be replaced but without the hood open, I can't get at it. I also tried to "trip" the latch on the hood itself, but I think the cable lock has to be released first in order to try to disengage the latch?

Posted by on

  • Anonymous Mar 18, 2014

    replace hood latch cable

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,982 Answers

Grab the cable stub with a pair of vise grips, have someone bounce the front of the hood while pulling...most times that will free a balky latch. Then you can change the cable.

Posted on Sep 10, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 4,536 Answers

Bring it to a discount parts center-ther eager to help specially if u buy--or a junk yard can do the same-bewar of dawg

Posted on Sep 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to open the hood if a 1990 Isuzu amigo from the outside when the hood release cable is broken


Hood release repair advice, page 5 - 2CarPros

www.2carpros.com/topics/body/hood-release?page=5Asked by vasti about 3 years ago - 4 Answers; 1994 Isuzu Amigo Engine Problem ...On my 2000 blazer the hood release cable broke and I can't open my hood.

Aug 04, 2015 | Isuzu Cars & Trucks

1 Answer

Broken latch cable for bonnet


you don't have many options right now, here is what you can try.

if the cable broke on the dash end, try to removing the release latch from the dash and grab the remaining part of the cable with locking pliers.

if the cable broke at the hood latch end. you will need to pry the latch open in the same direction that the cable release operates.
this might be possible with a long flat screw driver with the grill in place. to accomplish this try finding photos of the latch online to see how the mechanism operates. there will be two levers one with the cable attached the other is the safety. the cable lever needs to be released for the hood to open

Nov 11, 2013 | 1993 Subaru Loyale

1 Answer

How to diconect the brake cable handle to take out the dash board


i am assuming you mean the release lever, it just slides out of a c channel on the pedal assembly then fish the cable end out of the lever and it should pull right out

Jan 14, 2013 | 2000 Chevrolet Blazer

2 Answers

My hood release lever broke..how can I open my hood??


You should be able to still grab the cable with some pliers and pull on it. If you can't see the cable, you can pull off the kick panel to access it.

Good Luck!
~Brandon

May 28, 2011 | 1999 Chevrolet Blazer

2 Answers

Broke parking brake cable. Need to release park brake to get it to shop for repairs.


You need to lower the underdash shroud. Couple 7mm nuts hold it on. Look to the left at the parking brake pedal. Follow along a black sort of tube to the end. That end will have a cable comming out of it. Follow the cable. The cable is attached to the parking brake release lever. Pull the cable or the release handle and the parking brake should release.

Mar 03, 2011 | 2000 Chevrolet Blazer

1 Answer

Emergency brake wont relese


where realease cable goes thru dash,check far end of little cable see if end broke off?can release by pulling arm on top of pedal asembly.watch your fingers

Feb 11, 2011 | 1996 Chevrolet Blazer

1 Answer

Release cable is broken on 2000 grand prix unable to open the hood


depend where it`s broke if lever inside the car is broke try getting some plyers on the cable to open the hood and replace cable once hood is open

Oct 07, 2009 | 2000 Pontiac Grand Prix

2 Answers

Broken hood release on 98 chev 1500. How can I get it open?


if it is broken at the handle you should be able to grasp the cable with pliers to pull it otherwise you will have to go out front of truck and the best way i found requires long arms, but you would have to use a flashlight and slide under front bumper and look upward to find cable/latch assembly. You may be able to do it through the grill but if cant see it through the grill under neath.if you in front of truck pull latch to right and it will release.

Sep 02, 2009 | 1998 Chevrolet C1500

2 Answers

2000 Chevy Blazer with Broken Hood Release. How do I open the hood


can you reach the cable itself?,or is it broke at the hood latch?IF its not broken at the outside latch, try to follow the cable,un-hook it from the handle and pull on the wire cable to open it.IF its broken at the latch itself,you are going to have to reach the latch through the grille and try to pull the lever the cable connects to.That part is no fun at all..!!

May 09, 2009 | Chevrolet Blazer Cars & Trucks

4 Answers

2001 chevrolet blazer hood latch won't release and open hood


if the cable is not broken then pull the release then take the side of your fist and pound on the hood starting towards the top drivers side and slowly move towards the latch try it a few times i have to do this every single time on my blazer

Mar 18, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...