Question about 2003 Chevrolet Impala

1 Answer

2003 Chevy Impala, Driver Side of Dash Vibrating Sound

My 03 Impala has 45000 miles on it, and has just started to have a vibrating noise come from the driver side of the dash board. It happens with no Heat or A/C on, so no fans or blowers are running. All that has to happen is the car goes over an uneven patch of road or even the slightest bump. I checked all the screws around the dash and steering column to see if they were loose, but all are nice and snug. was wondering if there is a know issue of something coming loose behind the dash. Thanks for any help that can be offered.

Posted by on

  • Richard Scordino May 11, 2010

    have someone put their hand on parts of the dash till you locate the vibration. Most times once you find the general area you can put some "dum-dum" in the seams to stop the vibration. (you can get this from nearly every body shop, very inexpensive)

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

Do this, when the vibration starts, place your hand over the area and indeed verify the location. Next, check the area for loose anything that'll cause the vibration. Maybe that will help. Good Luck.

Posted on Sep 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ticking sound coming from the dash and a whining noise when in 5th gear


Search Results

    Dash Ticking Noise - Car Forums and Automotive Chat - Automotive ...

    www.automotiveforums.com > ... > Silverado
    I have no idea what the problem is but I think I have the same thing you do. Does itsound like it's coming from behind the instrument cluster or maybe a little to ...

    Ford Taurus & Five Hundred Clicking Noise In Dash Repair ...

    ? 4:44
    https://www.youtube.com/watch?v=g0qWRPZBhFo
    May 24, 2014 - Uploaded by FordTechMakuloco
    Ford Taurus & Five Hundred Clicking Noise In Dash Repair .... I have a 2008 ford taurus. there is ticking rapidly coming from the driver side by ...

    09-10 - 06 Impala Dash Clicking Sound Repair

    www.howtoalmanac.com/Scott/.../10-09-06ImpalaDashClickingSound.ht...
    My Chevy Impala started a clicking sound under the dash. It stopped ... Change the A/C controls until you hear the clicking sound coming from under the dash.

Dec 16, 2015 | Cars & Trucks

1 Answer

My chevy impala starts vibrating as i accelerate


Have the outer front drive axle CV joints checked and do it soon.

Aug 30, 2012 | 2004 Chevrolet Impala

1 Answer

Car vibrating while idling


Sounds like it is missing badly and would not be so noticeable when running. Have you had it tuned up lately? Could be wires and plugs need replacing. Also if you have a lot of miles on the engine the compression in the cylinders may be low. Two possibilities.

Jun 29, 2010 | 2003 Mazda MPV

1 Answer

Wind noise at about 60 miles a hour


This is common with these cars. There is no fix for the wind noise.

Oct 15, 2009 | 2000 Ford Crown Victoria

1 Answer

Vibrating noise from seatbelt pillar area on 2006 Corrola


they had a problem with that and they put foam around the assembly and used rubber bands to hold it on to stop making that noise, they have a campain on this and was a repair from factory.

Jul 20, 2009 | 1996 Toyota Corolla

1 Answer

Metallic, vibrating noise coming from engine compartment


I've actually had two different occasions (on different GM vehicles) which would produce this type of noise. On a 1990 Buick LeSabre it was loose bolts connecting the flex plate to the torque convertor ( sounds most like your problem). On a 1989 Pontiac Bonneville (actually 2 different ones) it was a bad harmonic balance pulley. The Buick only cost me the time to remove the dust cover from the bottom of the bell housing and tighten the bolts. The Pontiac's cost me $100+ for a new pulley and the time to replace them. Both require a bit of mechanical experience, but I did them and I'm just a simple farmer.

Jan 22, 2009 | 2005 Chevrolet Impala

Not finding what you are looking for?
2003 Chevrolet Impala Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...