Question about 2001 Chevrolet Blazer

1 Answer

Drvrs door window control button failure need

2001 Chevy Blazer 4 door -- drvrs door window control button failure need wiring diagram to test window motor before switch replacemnt

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 353 Answers

drvrs door window control button failure need - d70b02d.jpgDe342045.jpg

It is likely your switch, GM switches go bad all the time. The easiest way to test this is to pull off the door panel and hook two wire directly to the motor.

Posted on Sep 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace power window in driver door of 2001 chevy blazer?


are you replacing the power window regulator ?follow this u-tube link for excellent step by step instructions , if not the regulator let me know and i'll see if i can help further
How To Install Replace Power Window Regulator Chevy S10 Blazer GMC S15...

Sep 19, 2014 | 2001 Chevrolet Blazer

1 Answer

Why rear windows on 2001 chevy tracker won't work ?


Would seem your into the inner doors & have a partial
grasp on things

Now you fix all door windows one shot

#1 Test all switches,ohm meter unplugged or volt meter with power
#2 Test all motors with battery voltage direct -- DC motor will run either direction-- can't hook up wrong
#3 Window Regulators -you know about them (Unless they are broken-you said they are tight)
#4 Do you have good ground side wiring & battery voltage at all
switches & motors
#5 Last resort--unhook the cables & work on freeing up the
glass & window guides etc then you will have found out if the
regulators are the issue

Aug 16, 2014 | 2001 Chevrolet Tracker

1 Answer

My window. On my chevy venture goes down not up can u please help


You have to get access to all switches & test them

Having a wiring diagram is the only why to quickly &
safely do that

If the switches are good, the door panel comes off &
you look for a broken window regulator or test the motor
for failure

Aug 12, 2014 | Cars & Trucks

1 Answer

I have a 2001 Chevy blazer windows don't work rear


If windows are electric, check switch and replace if needed.
Check window motors wiring connections. If motors are bas, replace as needed.
If manual, window could be off track or cranking mechanism may be broken. Replace as needed.
If light fuses are good, replace bulbs to the lights.

Jan 21, 2013 | Cars & Trucks

2 Answers

1997 Chevy Lumina, I replaced the passenger side power window motor due to the factory one failing, The person before me cut all the wires going to the motor and toggle switch in their attempts to fix /...


There is a wiring harness on hinge side of passenger door correct, take a look at the wiring colors. Hope you can read it. At the window switch, the outside wire on either side is voltage or ground depending on which direction, up or down, reversing motor. You don't need the window switch for testing, you should be able to operate from driver door master switch. If you get the wires reversed, the only thing that will happen is, up will be down and down will be up, if that happens, reverse the wires. Just my opinion.
At the window switch, top middle wire is lockout, so only the driver can operate the windows.
power window-jlrraf3b1gxaofzrmafkiszu-5-0.jpg

Apr 26, 2017 | 1997 Chevrolet Lumina

3 Answers

2001 Chevy s10 Blazer. I have a service 4wd light. i can dissconnect the battery and the light goes away. when i drive the 4 lo light will come on from time to time and flash like its trying to engage and...


2001 Chevy Blazer it likes to stay in 4 low. replaced sensor, pannel motor, older computern to check it was placed for a couple weeks or less it will do the same thing again. Just dies and quits has to be restarted agin still in 4 low . Tried to shift the gears slowly, Place in reverse and 2HD pressed and held while backing up this dinn't work either. To get it home I had to hold it in neutral and run the gears again ginally I got it to a shop. He is out of ideas too.

Jul 28, 2010 | 2001 Chevrolet Blazer

1 Answer

My driver side windows and locks don't work motor has been replaced my husband thinks its one of the fuses or relay but needs a diagram


have him test the wires to the new motor to see if power is geting to it if not, trace wire to switches on door see if theres power there if not then its a problem further up the chain I dont have diagram sorry!. Question does the rest of the window controls on other doors work? if they do, then its the driver's switches.

Mar 18, 2010 | 2001 Ford Taurus

1 Answer

96 chevy blazer driver side power window not moving. Motor ticks for up and down but no movement. I took the door panel off and when I hit the button up or down I can even see a little movement in the...


poss window regulator failure.rec replacing window motor and regulator as an assembly.dorman and cardone make these parts and are fairly inexpensive.

Nov 21, 2009 | 2000 Chevrolet Blazer

2 Answers

99 chevy blazer lt front passenger window will not work up or down. from either driver switch or passenger switch


Hi: If other windows work then it can't be FUSE. I would take off the door panel and use a 12 volt test light to see if power is getting to the front passenger door motor (make sure power control switches are attached, key on position). If power... then hot wire the window motor using a 12 volt battery to see if it works. Hook + and - wires from battery directly to the motor, reverse them to make motor go up or down. To remove door panel pop electrical control up for the front and lift out then disconnect plugs. Use 7 MM socket to remove 2 screws under where handle is located. A Phillips screw driver removes the door handle cover. Pull on door panel to pop off, whole process takes under 5 minutes. If motor works and no power to motor from drivers door then there is a broken wire in circuit or the drivers control unit is not working. NEXT... disconnect drivers door control unit and check to see which brass terminals have power (key on position), note them... then put 12 volt power from battery to a terminal from plug that was attached to the passenger door motor, using your test light check drivers door plug to see if there is power to any terminals you DID NOT MARK as having power, if power then you know the circuit is good, do this with both wires from passenger door motor plug. (A circuit tester can be used as well). If continuity then the problem is in the drivers door control unit. If no continuity then a break in the wires to the passenger door, breaks usually occur between the body A pillar and where the wires go to the door as it flexes there every time the door opens or closes. Hope this helps, rate so I know if it is worth my while helping out on here.. thanks...

May 08, 2009 | 1999 Chevrolet Blazer

2 Answers

2005 chevy impala rear driver power window stopped going up.stuck


If neither switch works it is a bad connection at the motor or bad ground or a bad motor. Remove the door panel unplug the motor push the switch and see if there is 12volts on the wires if there is the motor is bad There are small brushes in the motor that go bad tap on the motor while pushing the switch if it works that way replace it

Mar 29, 2009 | 2005 Chevrolet Impala

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...