Question about 2000 Oldsmobile Intrigue

Open Question

2000 olds intrigue turn signals hazards and cruise control don't work?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Loringh
  • 185 Answers

SOURCE: Intrigue

probably need to change the thermal flashed. It should be in the fuse panel. The fuse panel is usually located in the dash just to the left of where your knee is located. The flasher is a small metal can that unplugs.


Hope this helps Loringh

Posted on Oct 28, 2008

  • 275 Answers

SOURCE: turn signals dont work

check the flasher and the fuse

Posted on Nov 19, 2008

  • 3 Answers

SOURCE: Front signal light Turn on but do not blink

try some electric contact lube in the light socket the leads may be corroded

Posted on Nov 28, 2008

goalie39
  • 469 Answers

SOURCE: turn signals and hazard don't work

Next best guess is the flasher unit has failed, this could be your little blue box, pick up a replacement at any auto parts store and replace it.

Posted on Apr 15, 2009

  • 1 Answer

SOURCE: Turn Signals

My daughter's car had a similar problem. After we owned the car for a year the blinkers would quit. At first taking out the fuse and putting it back in would be a temp fix, but then that wouldn't work. Then if the car sat for awhile they would work. One night I rechecked bulbs and fuses and couldn't get them to work, but when i got in to drive it to the shop they worked. Long story short, in our case believe it or not, it was the flasher switch. I was told by a GM dealer, the the Intrigue (emergency) flasher switches are quirky and go bad and it affects the blinker. I never had it put in because the car is a piece of junk, that has had one problem after another. Maybe playing with emergency flasher switch might heIp. I randomly bought a lemon. I cannot guarantee that's what it is, but at least you have a start. The install plus the part would have cost me about 138.00, that was lowest estimate. I had the guy look at some other things on the car and found out it's not worth fixing, unless you are a mechanic and can fix it yourself. I have never been more disappointed in a car in my life. If you start losing anti freeze , but can't find where it's leaking, email me. I can give you a lesson on all the things that go wrong with that model.
Casper
g.pavia@comcast.net

Posted on Jun 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the signal light relay that makes signal lights flash located on 2000 ols intrigue 3.5 liter


Important: The hazard warning switch includes the turn signal and hazard warning flashers.
Removal Procedure
Remove the center air deflector. Refer to Instrument Panel Center Air Outlet Deflector Replacement .
Squeeze the retainer on the backside of hazard warning and cruise control switch.
Pull the hazard warning and cruise control switch from the retainer in the instrument panel.
Disconnect the electrical connectors from the hazard warning and cruise control switch.
Remove the hazard warning and cruise control switch from instrument panel.
Remove the hazard warning and cruise control switch bezel from the instrument panel trim pad by using a small flat-bladed tool to the release retainers.
Remove the radio. Refer to Radio Replacement in Entertainment.
Reach through the radio opening and push the retainers up towards the roof of the vehicle. When the retainers release, slide the instrument panel (I/P) center air outlet deflector out of the I/P opening
Remove the air outlet deflector
Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gauges, and Console.
Remove the bolts from the radio.
Pull the radio toward you.
Remove the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement .
Pull the instrument panel (IP) accessory trim plate away from the IP trim pad.
Disconnect the IP harness seat heater leads, if equipped.
Remove the seat heater switches from the IP accessory trim plate, if equipped.
Remove the IP accessory trim plate.

Nov 09, 2016 | Cars & Trucks

1 Answer

The problem in my 2000 oldsmobile intrigue is the turn signals, when the car is left to sit for a while and turned on when the blinker switch is flipped the signals blink fine but once the car is put into...


most likely ur hazard switch is failing since ur singles go through ur turn signal can also be bad cant say with out seeing the car but the hazard switch is common n alot cheaper

Jul 09, 2011 | 2000 Oldsmobile Intrigue

1 Answer

The turn signals do not work when you use the signal switch. However, the emergency flashers do work. The fuse was checked and is good. Everything else on the signal stem works: the cruise control,...


if the fuse is good and all the lights work(if you checked them when the hazards were working)then you need a signal flasher,the signals have a separate flasher and it looks like the hazard flasher.if you turn on the hazards and look for it under the dash then you know what the signal flasher looks like,it is located on the fuse panel of in that area.

Mar 18, 2011 | Oldsmobile Bravada Cars & Trucks

2 Answers

Where is the Turn Signal relay located on a '00 Intrigue?


It's up under the left side of the dash, attached to the same bracket as the body control module. But sometimes the problem is in the hazard switch - try pressing it when the signals don't work and that often brings them back to life. Also, check the ground wire to the left of the base of the steering column.

Mar 29, 2010 | 2000 Oldsmobile Intrigue

1 Answer

I cant locate the flash fuse in my 2000 oldsmobile intrigue, i have been having problems with my indicator and hazard lights because they dnt turn on. What do i do?


The flasher is built into the hazard switch and the fuse is in the fuse box. it's the hazard fuse.

The turn signal and the hazard switch use the same flasher.

Aug 01, 2009 | 2000 Oldsmobile Intrigue

1 Answer

2000 Chevy Venture cruise control and lower tail lights not worki


Hi you have a multifunction switch , which is your turn signal arm and windshield wiper and also hazard and break lights , it is time to replace it.

Jun 08, 2009 | 1997 Chevrolet Venture

1 Answer

Front signal light Turn on but do not blink


try some electric contact lube in the light socket the leads may be corroded

Nov 18, 2008 | 2000 Oldsmobile Intrigue

1 Answer

Hi there. My car's signal lights will not work. We have checked the bulds and fuses and they are all in working order. A friend of ours told us it could be the Hazard light switch which also controls...


Same thing with my 2002 intrigue, one night the turn signals stopped working. hazards worked. then after a few minutes they worked just fine. it has been about two weeks since and had no problems!

Aug 07, 2008 | 2002 Oldsmobile Intrigue

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...