Question about 1998 Oldsmobile Intrigue

1 Answer

I have a 98 Olds Intruige and my right windsheild

I have a 98 Olds Intrigue and my right windsheild wiper is not working. I can see something turn in there but the arm doesn't come up. How do I fix this? What all do I need?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

Replace the motor

Posted on Sep 10, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Olds intrigue recalls

Replace wiper switch or bring it to your dealer.

May 10, 2014 | 1998 Oldsmobile Intrigue

1 Answer

My '98 Olds Intrigue passenger wiper quit. The driver side works fine. What to do?

The wiper arm fastens to a rotating shaft at the bottom. The arm may have loosened and needs to be tightened. Also could be a problem with the wiper linkage.

Sep 03, 2012 | 1998 Oldsmobile Intrigue

1 Answer


i check ur fuelinectors on heat soaked engine making sure their firing correctly and check fuel pressure at the rail from ur pump

Jul 09, 2011 | Oldsmobile Intrigue Cars & Trucks

1 Answer

What are the lower intake manifold bolt torque sequence on a 98 oldsmobile intruige

When torqueing bolts on manifolds or heads you always start in the middle or center and torque in a circle motion and olny torque 1 bolt at a time. Start with a low toque and increase torque up 5 to 10ft lbs / or newtons each time until torque spec is reached.

Mar 14, 2010 | 1998 Oldsmobile Intrigue

1 Answer

My '98 olds intrigue has wiper problems

My best solution, which you may not want to hear is new wiper motors. It seems like a common thing in these cars (the wipes don't go down all the way.

Mar 09, 2010 | 1998 Oldsmobile Intrigue

1 Answer

98 olds intrigue needs new battery. How do you

The red plastic cover should just pop off, then you will see the head of the terminal bolt. you'll need to remove the braket holding the battery in place, just remember to replace it to hold the new battery still.

Sep 26, 2009 | 1998 Oldsmobile Intrigue

1 Answer

Wiper does not stop wiping until engine shut-off

you need to replace multi function switch

May 08, 2009 | 2001 Oldsmobile Intrigue

1 Answer

The battery in my 98 olds intrigue is charged but there is nothing when I turn it over

Key switch?
Starter Solenoid?
Battery Cables?
All of these need to be checked.
Do and of the lights work?
Put a meter on the battery. Should show 12 to 13 volts
Have someone try to start the car, Does the voltage change?
Yes, you may have a starter problem.
No, you have a switch, cable or solenoid problem

Apr 13, 2009 | Oldsmobile Intrigue Cars & Trucks

1 Answer

Windshield wipers won't work right

The windsheild wiper relay might be stuck or broken. Try tapping it with something or replace it. Could also be the the switch (lever that you control the wipers with) i hope this helps and good luck with diagnosing your problem.

Feb 21, 2009 | Ford Taurus Cars & Trucks

1 Answer

99 Olds Intruige removing the alternator

disconnect the + lead of the battery
Remove the wires going to the alternator. Mark them with a piece of tape so you can put them back to the same terminal.
there are probably two bolts that need to be removed. One will be fastened to a slotted strap. Removing this one will allow the alternator to pivot on the remaining bolt. This will be the one that allows the fan belt to be removed from the pulley on the alternator. Removing the 2nd will allow the alternator to be removed from the engine.
Installation of the replacement is the reverse procedure. Aftere you install the 2nd bolt, put the fan belt back in the slot and pull the alternator so the slack is taken up in the belt, then tighten the bolt

Oct 20, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
1998 Oldsmobile Intrigue Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides