Question about 1998 Chevrolet Blazer

2 Answers

No brake lights, turn signals, or 4-ways.

I have running lights but no brake lights , turn signals, or 4 ways. i checked the fuses, they all check out ok. all 4 lights went out at the same time so i ruled out the bulbs.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

Did you actually check the bulbs? I believe your brake lights, signal lights, hazards all use the same bulb for each side.

Your brake lights may be your brake switch just above your brake pedal.
The signals could be your electronic flasher module (EFM) located under the dash near the steering column.
Your hazards may be affected by the EFM, but not likely and the switch for your hazards may be faulty

Posted on Sep 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Sounds like a short to me. Or a bad breaker on the fuse pannel. A lot of people check the fuses, but most dont check the breakers or the flasher that also has to work correctly to work the 4 ways and turn signals. I dont believe that one has a second fuse box under the hood, but it would not hurt to check it out. Most of the newer ones do.

Posted on Sep 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my turn signal/ hazard light fuse keep blowing out


you have a short in one of the light sockets or a worn wire from the wiring harness. could be the flasher assembly. are the turn signals different bulbs from the brake lights? Does using the brakes blow the fuse? (Rear lights or brake light switch on brake pedal). left or right turn signal blowing the fuse will tell which side has the short. 4 ways only, replace the relay.

May 21, 2015 | 2004 Jeep Grand Cherokee

2 Answers

Turn signals 4 way and brake lights don't work


Replace the hazard flasher and brake switch. No year make or model.

Apr 03, 2015 | Cars & Trucks

1 Answer

I have no turn signals. The 4 ways work running lights work and brake lights work but not the turn signals


Check the flasher that is located under the dash, sometimes there on the fuse box.

Dec 21, 2010 | 1990 Ford F350

1 Answer

Have a 89 dodge raider;;have no turn//4-way flashers or brake lights;;all fuses good;have power to brake light switch and leaves switch when apply brakes;;found round flasher[4 way flasher]know this...


Hey HotrodHarley,
I would pull out your hazzard switch and clean it real well. the signal, brake lights are connected to the hazzard switch and if it doesn't fully disengage you wont get the brake lights or the flashers to come on. It happened to me on my 89 Raider last year.

Oct 27, 2010 | 1987 Dodge Raider

1 Answer

My blinkers and flashers all quit working at the same time. Indicator lights in the dash won't even light up. Do flashers and blinkers run off the same fuse?


The do not run off the same fuse but they do run off the same blinker. Try turning on the key, click the left/right (check both) turn signal and then operate the 4 ways on and off at the same time. Work the 4 way switch back and forth 10 to 25 times and see if you get any short winks or blinks from the system.
Turn signals are usually on their own fuse in the glove box and hazard are on with the brake fuse. If this does not work, I would look at the blinker. It is possibly bad. Check each pin of the blinker and see if there is power there when you turn on the 4 ways or turn signals. Replace Blinker. Make calls to parts stores and dealer for location of this blinker.

Mar 21, 2010 | 1995 Buick Regal

2 Answers

Lights


turn signals and 4 ways or hazards and brake lights all run the same circuit. Parking lights or marker lights you probably have a blown fuse. Depending on what your vehicle is it may have seperate circuit (fuse), check all your fuses

Sep 11, 2009 | 2003 Ford Crown Victoria

2 Answers

2001 ford focus brakelights not working


check the fuses, and bulbs first, if not that, i might be the switch

Jul 14, 2009 | 2001 Ford Focus

3 Answers

Brake lights don't work. Fuse is good, bulb is good, but brakes still won't come on. GMC Sonoma 1994.


please check your brake light switch located near the brake pedal. it could be faulty.

tnx 4 using fixya,

drcool

Sep 24, 2008 | 1999 GMC Yukon

Not finding what you are looking for?
Cars & Trucks Logo

580 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...