Question about 1999 Chrysler Sebring

1 Answer

Speedometer don't work as well as automatic transmition

On the control desk no indication on witch gear rapport I am and the gear are not changing (the RPM goes high)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Check with a DRB scan tool to see if the transmission is seeing input and output speed, as these sensors were very common to fail.

Posted on Sep 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the problem if the car is not shifting? It's just shifting to park, neutral, and drive but not shifting to second gear or higher.. also the speedometer is not working..


possible cause is the torque converter clutch servo/solenoid
changing on the indicator but no drive through the gear box
run the fault codes and check for problem clutch servo/ solenoid or transmission control module
check all wiring and connections to transmission

Jul 13, 2016 | Cars & Trucks

1 Answer

My car Moves very well, it selects the options on the gear very well i.e P,R,N,D,2,L, but cannot change i.e Cruise control select while moving especially on D,2,L, options on the gear. Normally the car is...


If cruise control is selected, it engages automatically at a certain road speed. Your description indicates that you are confused about the overdrive function.

The malfunctioning speedometer requires troubleshooting to isolate the cause.

Jan 10, 2014 | Cars & Trucks

1 Answer

Instrument cluster gauges


Check engine light ,abs , air bag lights etc.... come on when key turned on ?
Fuse IPC/HVAC BATT 10 amp located in the left IP junction block . Do you know where this junction box is ?
Does the heater an A/C work ? If so the fuse isn't the problem .
Speedometer
The speedometer is a road indicator. The vehicle speed sensor (VSS) is a permanent magnet generator which is located on the transaxle. The VSS sends an input to the PCM whenever the transaxle differential carrier turns. The PCM then buffers the VSS signal. The PCM transmits the VSS signal to the following components at 4000 pulses/mile through CKT 817:
• The instrument cluster
• The cruise control module
• The radio (uplevel)
The instrument cluster uses the input in order to indicate the vehicle speed on the speedometer.
Instrument Cluster Indicators
The BCM controls the instrument cluster indicators through the SPI serial data communication bus. Refer to Body Control Module System Check in Body Control System.

IPC/BFC ACC
10A
Instrument Cluster and Body Control Module (BCM)
IPC/HVAC BATT
10A
Instrument Cluster and Heater A/C Control Assembly

Jul 24, 2017 | 1998 Oldsmobile Cutlass

1 Answer

95 honda accord speedometer works some times goes on and off but the real problem is when driving from a dead stop car takes off fine but when it switches gears losses power(torque) and does not switch...


Sounds like the sending unit to the speedometer is failing. This causes the speedometer to jump around and confuses the heck out of the electronics that controls your automatic transmission.

Sep 20, 2012 | 1995 Honda Accord

1 Answer

My transmition jumps when going to 3rd gear and/or overdrive


This is all to common a post for your van, read it over and over again, there are class action law suits over this transmission having so many failures, if any money has been paid out i can't say, buy u will need to have the trans removed and torn down and overhauled to correct this problem

Mar 27, 2009 | 1994 Plymouth Voyager

1 Answer

Speedometer don,t work


Depending on whether your speedo is mechanical (uses a cable), or electronic (uses an electrical wire to carry the signal from the sender), I would look it (what's in between the speedo and trans speed sender) before replacing the instrument panel. A good service manual that includes a dash wiring diagram should help trouble shoot this problem.
Good luck.

Aug 29, 2008 | 1995 Buick Skylark

3 Answers

Automatic transmission problem


I have 1998 Maruti Esteem Automatic gear car - It works smoothly for 10-15 Kms and afterwards gear not shifting (may be getting heated inside somewhere?) - Recently I changed gear oil also. Any solution???

Jul 01, 2008 | 1997 Suzuki Esteem

Not finding what you are looking for?
1999 Chrysler Sebring Logo

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...