Question about Daewoo Nubira

2 Answers

Daewoo Matiz crankshaft pulley

I`ve got a 2000 model Daewoo Matiz. I`m having trouble getting the crank shaft pulley off, is it left hand threaded?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Daewoo Master
  • 450 Answers

Remove the outer small bolts to remove balancer(pulley) the big centre bolt holds crankshaft gear for timming belt which slides off with timming belt removed.

Posted on Sep 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The thread is a standard there is a hole in the bell housing at the bottom for a flat screwdriver witch locks the flywheel so u can undo the bolt
It is a right hand thread

Posted on Oct 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is the crank shaft pulley on a renault 1.5 megane left/ or right hand thread


They'd be right hand threads-regular threads-to loosen, turn counter clockwise. An air impact wrench is best for removing the crank bolt. Or a long breaker bar and socket on the bolt, if you can hold the crankshaft stable so it doesn't turn backward with pressure on the bolt. You can pull the starter off, and wedge a big screwdriver or prybar against the flywheel's ring gear teeth, then turn the bolt with the breaker bar.

Jul 13, 2012 | Renault Megane Cars & Trucks

1 Answer

Hi im having trouble removing the small allen head bolts that hold the crank pulley on on a 1999 daewoo leganza 2.2l are the left or right hand thread . im trying to remove them to take off the timing belt...


You will not need to remove the crankshaft pulley. There will be a belt tensioner that you release to be able to remove the belt. But im not familiar with your car.

Open this link, the tensioner is pictured:

https://www.napaonline.com/Catalog/CatalogItemDetail.aspx?A=NBHT43106_0323240851&An=599001+101999+50019+2019002+28951&Ar=AND(P_RecType%3aA)

Looks like you release it with socket bit with an allen wrench.

Rotate the tensioner and you can remove the belt from the tensioner, then release the tensioner after you pull the belt off the pulley.

Sep 20, 2011 | Daewoo Leganza Cars & Trucks

1 Answer

Can't get the crank pulley loose. is it left our right threads. i am replacing the water pump.


TURN CRANKSHAFT BOLT COUNTERCLOCKWISE TO LOOSEN. YOU HAVE RIGHT HAND THREADS.ENGINE TURNING CLOCKWISE.YOU NEED A STRAP WRENCH HOLD CRANKSHAFT PULLEY WHILE LOOSEN IT.BUT YOU NEED A CRANKSHAFT DAMPER REMOVAL TOOL.OR HARMONIC BALANCER REMOVAL TOOL.YOU NEED STRAP WRENCH TO HOLD CRANKSHAFT PULLEY WHEN TIGHTEN IT.TORQUE CRANKSHAFT PULLEY BOLT 90 - 98 FT LBS. MAKE JOB EASIER.HAVE A HELPER HOLD STRAP WRENCH WHEN YOU LOOSEN OR TIGHTEN CRANKSHAFT PULLEY.

Sep 19, 2010 | 1995 Mercury Villager

2 Answers

TRYING TO RMOVE CRANKSHAFT PULLEY


yes, thats tone ring for crank sensor,car may run bad and trun on check engine light.good luck.

Oct 06, 2009 | 2000 Daewoo Lanos

1 Answer

Crank shaft pulley


Should be a right hand thread . Only left hand threads I have come across are Honda's and some Mitsubishi's.
It will be very tight!
Hope this helps

Aug 01, 2009 | 1995 Isuzu Rodeo

1 Answer

Locking then engine


On the bottom of the gearbox there is a square hole to lock the teeth on the flywheel with a flathead screwdriver

Feb 20, 2009 | 2000 Daewoo Nubira

1 Answer

Power steering for Daewoo Matiz


i have a Daewoo Matiz 2000. It doesn't have Power Steering although other models of Matiz came with Power steering. I want to know if a Power steering can be installed on my Matiz. If so, whom can I contact.

sreejith

Jan 22, 2009 | 2002 Daewoo Lanos

1 Answer

Cant get the crankshaft pulley off


It's most likely right hand thread. You will have to use a large breaker bar to get enought leverage to remove this nut. Or you can use what ever you have and place a steel pipe on the end of it for extra leverage. If it doesn't budge, you may have to soak it in penetrating oil, and use an impact wrench. Make sure you remove the large washer under the nut "before" you remove pulley.

Nov 11, 2008 | 1997 Jeep Tj

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

863 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...