Question about 1997 Chrysler Cirrus

1 Answer

I need a perfromance chip for 1997 cyrsler cirrus

I need a perfromance chip for 1997 cyrsler cirrus lx tht will raise my speed limiter and give me more horsepower torque and possibly mpg as a bounus. has a 2.5L in it. THanks for the help

Posted by on

  • tpenger Oct 12, 2009

    someone else please tell me how i can raise the speed limiter on a Chrysler cirrus lx with the 2.5L engine in it i want to be able to go faster, it can only go 107 right now i want to be able to go like 120 to 135 if that is at all possibly. i don't care what the cost of it is i just want to know what i can get for it. thanks for the help please get back to me on this i want alot of feedback so i have options on what to do.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An user who is expert in 3 categories / brands.

  • Chrysler Master
  • 1,632 Answers

No improovement you will find with that chip on a 2.5 l engine.
you might as well try some Nitro package to boost up performance but you can use it only in race track for fun and not for daily comuting.
that raising the speed limiter will ruin your engine in the long run.

Posted on Sep 10, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does the book say in hours to replace the timing / water pump on a 1997 chysler cirrus 2.5 v6 ? Or in your opinion what's a fair price to have this done by private person coming to the house .

Replacing Chrysler 2.2 and 2.5 liter engine timing belts
Replacing the timing belts on Chrysler and Dodge 2.2 and 2.5 liter ... Then loosen the bolts on the crankshaft pulley and the water pump pulley so they will be ...

HOW TO PUT WATER PUMP ON - 1997 Chrysler Cirrus > Questions > Chrysler > Cirrus > 1997 Chrysler Cirrus
Jul 4, 2010 - WATER PUMP WANT HOLD WATER LONG AND NOW IS MAKING A ...If you change the water pump,you need to also change the timing belt ...

Timing belt - 1995 Chrysler Cirrus - RepairPal

Nov 24, 2015 | Cars & Trucks

1 Answer

Hi i have a 1997 honda acccord lx with a vtec engine i got the check engine light and scanned, recieved dtc code p1259 vtec system failure the symptoms are it driving normal until it reaches 3,500 rpm

If this is a 1997 LX Accord, it did not come with the VTEC, that was only on the EX version in 1997. So someone put an EX VTEC engine in your LX. I've seen this done, and it requires a EX pcm computer. It also needs VTEC wiring to be installed. Check the engine serial # and ID what this engine is from.
If this is actually an EX Accord, then there are more things that can fail than the solenoid. The pressure switch is a common failure.

Oct 21, 2014 | 1997 Honda Accord

1 Answer

I need to find the battery on the 1997 chrysler cirrus lx

front left fender
u have to take the wheel plastic cover off
very odd place

Dec 21, 2012 | 1997 Chrysler Cirrus

1 Answer

2001 Cyrsler Concorde LX is not changing into gears?

Hi angelicapowe,
I am here as promised. I hope our chat has helped to clear some things up for you. If you need any further assistance or advise, just post a comment here and I will recieve an Email to let me know your needs. Then I'll get back to you. In the meantime, good luck getting your Chrysler to straighten up and act like a good car should!

May 14, 2011 | 2001 Chrysler Concorde

1 Answer

I have a 1995 Chrysler Cirrus LX and it won't shift above 2nd

Sounds like your original problem was the TCM. Find out what codes are in the TCM, and fix them. You most likely have a bad output or input speed sensor, or a solenoid pack.

Jun 19, 2009 | 1995 Chrysler Cirrus

1 Answer


Look under the hood on the drivers side of the engine compartment next to the air box for your filter. Two black covers there that have fuses and relays.

Also, on the drivers side of the dash on the end (I think). Look there too.

Let me know what you find.

May 07, 2009 | 1996 Chrysler Cirrus

1 Answer


  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle.
  3. Remove the wheel and tire assembly.
  4. If equipped with an Anti-lock Brake System (ABS), remove the wheel speed sensor cable routing bracket from the steering knuckle.
2471d29.jpg 65ff15e.jpg There is more.....

May 07, 2009 | 1995 Chrysler Cirrus

1 Answer

The car turn off, when I'am driving (not in high speed)

lose connection in the key switch have the sterring colum looked at!

Apr 17, 2009 | 1997 Chrysler Cirrus

Not finding what you are looking for?
1997 Chrysler Cirrus Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides