Question about 1998 Cadillac DeVille

2 Answers

L have a cad 1998 deville concoursit has a late shift when i take off after it shifts though all the gears its okay an it has a code 730 gear ratio not similar

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the exact same problem we switched it twice thinking the transmission was bad and well im here trying to find an answer

Posted on Sep 11, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

This code means there has been excessive slip in the transmission, possibly due to lack of fluid.

Check the fluid level by warming up the car then check the dipstick with the engine still running.

Or....you may have a faulty vehicle speed sensor (VSS) located on the output shaft transmission casing.

Posted on Sep 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission shifting problems


Yes ,you need to replace only ,after checking vacuum line that runs to it and make sure it's working correct

Apr 14, 2014 | 1998 Ford F250 SuperCab

1 Answer

My 1995 Cadillac Deville won't shift out of first.


Sounds like a bad shift sylenoid try flushing it but it might be to late

Dec 04, 2012 | Cars & Trucks

1 Answer

1996 Deville sat for a few months...shifted fine before parked, now it won't shift out of 1st gear. Any suggestions? Codes are AC1312, TC0023 & RS0038 current. There are a few other codes but


Have the transmiision serviced with new fluid and a filter. Also do a OBD2 ele ctronic system control fault code test with a scanner or code reader.

Oct 30, 2012 | 1996 Cadillac DeVille

1 Answer

How to fix problem codes 730-733 laredo 2009


There is no one fix works for all on these code. Also you have left out the letter and one number of the code I assume these are P0730 and P0733, if so read on.

P0730 CHRYSLER - Incorrect Gear RatioPossible causes- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Shift solenoids harness or connectors
- Transmission mechanical problems
- Transmission hydraulic control circuit

P0733 CHRYSLER - Gear Ratio Error In Third GearPossible causes- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

Jun 27, 2012 | Jeep Grand Cherokee Cars & Trucks

2 Answers

What are the automatic transmission problem codes PO 751, PO 761, PO 734 indicate


PO 734 GEAR 4 INCORRECT RATIO
PO 751 SHIFT SOLENOID A PERF OR STUCK OFF
PO 761 SHIFT SOLENOID C PERF OR STUCK OFF

Jul 05, 2011 | Ford Focus Cars & Trucks

1 Answer

Hi sir, i want some details related to the gear


P0700 Transm.Contr.System Malfunction 17084
P0702 Transm.Contr.System Electrical 17086
P0703 Torque Converter/Brake Switch B Circ Malfunction 17087
P0705 Transm.Range Sensor Circ.(PRNDL Inp.) Malfunction 17089
P0706 Transm.Range Sensor Circ Range/Performance 17090
P0707 Transm.Range Sensor Circ Low Input 17091
P0708 Transm.Range Sensor Circ High Input 17092
P0710 Transm.Fluid Temp.Sensor Circ. Malfunction 17094
P0711 Transm.Fluid Temp.Sensor Circ. Range/Performance 17095
P0712 Transm.Fluid Temp.Sensor Circ. Low Input 17096
P0713 Transm.Fluid Temp.Sensor Circ. High Input 17097
P0715 Input Turbine/Speed Sensor Circ. Malfunction 17099
P0716 Input Turbine/Speed Sensor Circ. Range/Performance 17100
P0717 Input Turbine/Speed Sensor Circ. No Signal 17101
P0721 Output Speed Sensor Circ Range/Performance 17105
P0722 Output Speed Sensor Circ No Signal 17106
P0725 Engine Speed Inp.Circ. Malfunction 17109
P0726 Engine Speed Inp.Circ. Range/Performance 17110
P0727 Engine Speed Inp.Circ. No Signal 17111
P0730 Gear Incorrect Ratio 17114
P0731 Gear 1 Incorrect Ratio 17115
P0732 Gear 2 Incorrect Ratio 17116
P0733 Gear 3 Incorrect Ratio 17117
P0734 Gear 4 Incorrect Ratio 17118
P0735 Gear 5 Incorrect Ratio 17119
P0740 Torque Converter Clutch Circ Malfunction 17124
P0741 Torque Converter Clutch Circ Performance or Stuck Off 17125
P0748 Pressure Contr.Solenoid Electrical 17132
P0750 Shift Solenoid A malfunction 17134
P0751 Shift Solenoid A Performance or Stuck Off 17135
P0752 Shift Solenoid A Stuck On 17136
P0753 Shift Solenoid A Electrical 17137
P0756 Shift Solenoid B Performance or Stuck Off 17140
P0757 Shift Solenoid B Stuck On 17141
P0758 Shift Solenoid B Electrical 17142
P0761 Shift Solenoid C Performance or Stuck Off 17145
P0762 Shift Solenoid C Stuck On 17146
P0763 Shift Solenoid C Electrical 17147
P0768 Shift Solenoid D Electrical 17152
P0773 Shift Solenoid E Electrical 17157
P0790 Normal/Performance Switch Circ Malfunction 17174

Dec 20, 2010 | 2006 Renault Fuego

1 Answer

Please,can you help me fix cods problems p0732,p0734 on my 2006 Mazda Tribute


P0732 - Improper Ratio for Second Gear.
P0734 - Improper Ratio for Fourth Gear.

This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by TCM as follows:

Torque converter slip ratio = A x C/B A: Output shaft revolution signal from revolution sensor B: Engine speed signal from ECM C: Gear ratio determined as gear position which TCM supposes

If the actual gear position is higher than the position (2nd and 4th) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.

This malfunction will be caused when shift solenoid valve B is stuck open.

Gear positions supposed by TCM are as follows. In case of gear position with no malfunctions: 1 , 2, 3 and 4 positions In case of gear position with shift solenoid valve B stuck open: 4* , 3, 3 and 4 positions to each gear position above.

Symptoms: Engine Light ON (or Service Engine Soon Warning Light)

Diagnostic trouble code A/T 2ND GR FNCTN with CONSULT-II or P0732 without CONSULT-II is detected when A/T cannot be shifted to the 2nd gear position even if electrical circuit is good.

Possible Causes:
- Shift solenoid valve B
- Each clutch
- Hydraulic control circuit


Check it and tell us news.

Nov 23, 2010 | Mazda Tribute Cars & Trucks

1 Answer

My 1998 cadillac concours just gave me the code 730


This code means there has been excessive slip in the transmission, possibly due to lack of fluid.

Check the fluid level by warming up the car then check the dipstick with the engine still running.

Or....you may have a faulty vehicle speed sensor (VSS) located on the output shaft transmission casing.

Sep 11, 2009 | 1998 Cadillac DeVille

1 Answer

1998 dodge stratus will not shift after engine swop


Check the input shaft and output shaft speed sensors on the transmission. One is likely bad.

May 26, 2009 | 1998 Dodge Intrepid

Not finding what you are looking for?
1998 Cadillac DeVille Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...