Question about 1998 Lincoln Town Car

1 Answer

Rear suspension dose not rise

98 twoncar, some time it would stop working while driving. stopping and turning off the car would cause it to rise. now it dosent work at all

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 5,546 Answers

You can try Autozone or Oreillys and ask if they have a scanner for the air suspension.
If not the dealer most likely does. It won't be cheap at a dealer, but it is the fastest and easiest way to diagnose it.
There are so many switches and cutoffs that you can spend a fortune guessing. The right tool can make it a 1 hour job.

Posted on Sep 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 lincoln navigator air suspension leaks down after rising up


You may have a crack in a line somewhere. You hear it cycling while driving because the height sensor is telling it to lift because it's loosing air somewhere. I'd replace those o-rings first.

Jul 02, 2017 | Cars & Trucks

1 Answer

When i crank my car it rises up but lately it rises a little then stops and my car says check ride control


The most common cause of this is leaking air suspension bags (also called air springs).

Apr 12, 2011 | Lincoln Continental Cars & Trucks

1 Answer

98 lumina brake lights and rear turn signals stopped working.


A flasher would not cause this problem, It's in the trun signal switch, it needs to be replaced

May 30, 2009 | 1997 Chevrolet Lumina

1 Answer

I have a 98 Subaru outback legacy with 151,000 miles. I've had it for roughly 5 months in which time I had the head gasket, radiator, and rear main seal replaced. I live in MN, after the last round of...


I would make sure the Termostat u instaled is correct. Also have the Coolant system flushed and replaced. The gauge may not be reading properly which could be the sending unit. You have already replaced the main components that fail. Hope this helps and have a great day.

Mar 26, 2009 | 1998 Subaru Legacy

1 Answer

98 deville rear suspension problem


You may have either leaking shocks. follow the air line from the shock to the compressor.

Jan 03, 2009 | 1998 Cadillac Seville

5 Answers

Air Rise Suspension/computer module


my brother in law replaced the air springs on my '94 town car with rear coil springs from a '92 crown vic. He raised the rear tires off the ground and put jack stands on the frame for safety on both sides. Then disconnected the shocks at the lower end and removed the air springs.removed rear tires and used a piece of 2x4 to pry axle down to provide clearance to put coil springs in place. then hooked shocks back up and it worked fine. the only way the coil springs could come out is if the car was upside down and then who cares. This project only cost $ 25.00 Real cheap being we were broke!

Jul 20, 2008 | 1993 Lincoln Town Car

Not finding what you are looking for?

Open Questions:

0 Answers

98 Lincoln TC,Cold starts fine ,runs good until warm, then shuts off. No codes,Cranks ok, have spark, PATS ok. No fuel pressure, cant hear fuel pump prime,New Fuel relay. jumped fuel pump - works. I do not hear fuel pump prime up, do not have fuel gauge, but pressing on valve in fuel rail- no pressurized fuel. Fuel regulator seems ok, not leaking / vacuum line dry as a bone. If I let it set for 15 min , it will start up again, but for a few minutes then dies out. If I let it set overnight it starts up perfectly and runs until operating temp is reached then stalls/stumbles, and shuts down. Vacuum is good while cranking, even with no start, Checked Inertia switch in trunk, it is not tripped. I have seen Ford TSB summaries' that mention issues like this , but I am not able to see to description. A point to add, the MAF sensor was cleaned, then I decided to replace it and did not make a difference. I do not have any stored codes, and the PATS is working fine, typical 2 second flash from and once key is inserted a 3 second steady light, then disappears. I have seen the TSB mentioning C103 Connector, it looks fine, I swapped out fuel pump relay with ac relay, still no difference.mention of wires around battery, do not know where to start. in dash service engine light and odometer is normal, seen other posts the say they only have lines, but mine is ok. the start of all of this , I washed engine with regular garden hose, ( not using pressure washer).also in the mean time, rear window defroster stopped working as well, can not say for same reason, but a mention.My problem started after washing engine. this is one of four Panther platform vehicles I owned with exact 4.6l w code engine, which I rinced down before. The only sensor I can think of is Oil pressure , or a corroded wire

Feb 27, 2017 | 1998 Lincoln Town Car

See all 1998 Lincoln Town Car Questions

1998 Lincoln Town Car Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...