Question about 1995 Chevrolet S-10 CA Edition

2 Answers

I have a 1995 chevy blazer with the 4.3 high output vortex motor no cat in it did the fix to the 02 so it would read right just changed the fuel pressure regulator and now it blows white smoke and runs like **** any help would be greatly appreciated

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

White smoke is typicaly coolant, sometimes trans fluid will also apear white. I would pull the plugs first off to see if one or more is "wet" with fluid, also dbl check fluid levels.

Posted on Sep 10, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

White smoke means there's water or coolant mixing in with your fuel. Could mean a blown head gasket or intake manifold. The more you drive it like this, the more expensive the damage will be to repair.
As you have already changed the regulator and checked sensor the above can be a problem please check

Posted on Sep 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 Chevy Blazer 4 door I've change the ignition switch starter all that good old stuff if I turn the key and jumper by the starter it will run I have liked it just no crank no start


1989 Chevy blazer 4.3 won't start..I have ... - CarGurus

www.cargurus.com > Questions > Chevrolet > BlazerCarGurusJan 30, 2013 - 96 Chevy S10 Blazer with 4.3 L engine vortex will turn over but won'tstart. ... i a 93 k5 blazer 5.7tbi in cold weather it will not start, if i hook jumper ... was told it just needed a Fuel pump, I replaced the Fuel pump, and the Filter, ...

Oct 12, 2015 | Cars & Trucks

1 Answer

What will cause motor not to start and smell like gas on 1995 chevrolet blazer 3.8liter vortex


check for gas leak if none found these had a problem with the spider injection system inside the intake cracking causing a leak and no start due to the poppet injectors not opening due to weak fuel pressure. these operate at 56lbs pressure and its critical.

Oct 14, 2014 | 1995 Chevrolet Blazer

1 Answer

When low on gas I made an abrupt stop, car would not start. found out that it had a firing problem, changed spark plugs, distributor, rotor still won't start this is very confusing. read the manuel dose...


Try checking the fuel filter and pump. Easy fix is the filter of course but if that doesn't work, try the pump. It is located in the tank and can be checked by seeing if there is pressure in the line going into the TBI or injectors. It is supposed to be at a certain pressure rating and there is a way to do that with a valve but that is a little more technical.

May 14, 2014 | 1995 Chevrolet Blazer

1 Answer

I was given a 1994 s10 Chevy Tahoe vortex blazer


I was given a 1994 s10 Chevy Tahoe vortex blazer??????? It's either a S-10 pick-up or it's a Tahoe or a Blazer not all three . So which is it ?

Mar 11, 2017 | 1994 Chevrolet S-10 Blazer

1 Answer

Error codes 1133 & 1153 1998 chevy blazer


code P1133 is for a problem with 02 sensor bank one sensor one. this is the left 02 sensor in front of the cat. converter. code P1153 is for a problem with 02 sensor bank 2 sensor 1, which is located on the right side of engine in front of the cat. converter

Jul 07, 2011 | Chevrolet Blazer Cars & Trucks

2 Answers

1996 chevy s10 4.3 vortex lifters knocking at start up but goes away after 10 minutes idling. changed oil and filter oil pump reads 58-60psi at idle and seems to be working.


High milage? Try engine cleaner, run for couple hundred miles and then use an additive like Restore. If it's just dirt this may help. Make sure you are using the correct viscosity oil for winter temps. If it's from wear only parts replacement will fix it.

Feb 07, 2010 | 1996 GMC Jimmy

Not finding what you are looking for?
1995 Chevrolet S-10 CA Edition Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...