Question about 1994 Toyota Corolla

1 Answer

How do i install a bumper cover on a 1994 toyota coroll. Car involved in an accident but only the front bumper cover and the bumper lights were damaged. I looked up parts on line and think they could be installed DYI

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

Very easy fix for DIY, when you get the new bumper cover you will be able to see all the mounting points so you can find them on your ould cover easier. I did one on an Escort awhile back, my first cover to do, and had it done in about an hour, includding beer time :-)

Posted on Sep 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove front headlight assembly 2002 toyota highlander


I changed my 2001 Toyota Highlander headlights recently. First, remove the grille. There is one screw in the center which will require a loonng Phillips screwdriver to reach it, down behind the grille, right in the center. Then remove the four plastic clips at the top by prying them up with a small flathead screwdriver. The bottom just pulls forward. Important: Now go to each side of the car, and in front of each fender well, there is one clip that holds the bumper cover on. Pull the top corner of the bumper cover toward you to release the clips, one on each side, at the top corner, along the front of each fender well where the bumper cover meets the fender. The bumper cover can now be loosened along the top without entirely removing it. It just pulls forward. Inspect the underside of the bumper cover for broken clips and replace as necessary. Now remove the two bolts that hold down each headlight at the top. Disconnect the wiring and bulbs and wiggle the old headlights out. Install the new ones and reverse the process. If your AC isn't blowing cold, check the condenser for leaks before you reinstall the grille. A new aftermarket condenser/filter dryer is easy to install by removing the battery and tilting the radiator back to get the condenser out. A replacement only costs $75 and can be swapped out in one half hour with a few metric sockets. Then you will need to recharge the AC system with R-134a, which is easy. Just buy a R-134a kit with hose at Autozone and follow the directions. $50 Replacement fog lights are only $52/pair for aftermarket. You may consider replacing those as well. They have a strange installation with clips and you will need to pry/bop them forward, not remove them from the back. They are aggravating to replace but not technically difficult.

Apr 17, 2013 | 2003 Toyota Highlander

Tip

How To Replace Install Front Bumper Signal Light 1995-96 Toyota camry 1AAuto.com


How To Replace Install Front Bumper Signal Light 1995-96 Toyota camry 1AAuto.com

on Apr 26, 2012 | 1995 Toyota Camry

2 Answers

How to replace front bumper cover



Instructions

Engage the emergency parking brake, to avoid causing the car to roll or move when removing the bumper.

Release the screws holding the wheel well liners in place with a screwdriver. This will expose the screws holding the bumper bolts. Release the bolts holding the bumper in place, using a wrench, and have a friend support it while it remains wired to the car.

Disconnect the wiring running to the bumper to separate the fog lights from the car. Pull out the light fixtures from the bumper cover.

Remove the grill in the bumper cover, taking out the screws holding it into the cover. This will allow you to separate the grill and the bumper cover.

Secure the grill and light fixtures into the new bumper cover, using the hardware you removed from the old cover.

Reconnect the necessary wiring. Support the bumper cover in front of your car or have your friend hold it in place again.

Secure the bumper cover using the retaining bolts you took out earlier. Tighten the bolts to hold the bumper cover securely against the car.

Replace the wheel well liners with the screws you took out.


Jul 07, 2012 | 2006 Chrysler Pacifica

1 Answer

Remove headlight 2002 toyota mr2


Believe it or not, this is the headache to remove and replace the headlights:

Removal & Installation
  1. Remove the front bumper cover.
  2. Remove the tool box and the luggage compartment trim (carpet).
  3. Remove the 2 bolts and the nut.
  4. Disconnect the connectors, then remove the headlight

c17hydro_152.gif
  1. Front bumper cover removal-MR2



c17hydro_153.gif

To install:

  1. During installation, if the headlight is damaged, it can be reinstalled by installing new retainers.


c17hydro_154.gif

If the headlight is damaged, cut off these retainers



c17hydro_155.gif

Install new headlight retainers

Apr 19, 2011 | 2002 Toyota MR2 Spyder

1 Answer

Change head lite bulbs 2000 toyota GTA


The easiest way to change them is to remove the 3 bolts that hold the headlight in place, 1 is directly on top of the headlight, 1 can be seen thru the upper radiator support(of course be sure to remove the plastic engine compartment covers if they are installed), and the 3rd is hidden underneath the front bumper cover, to remove the front bumper cover, move aside the inner wheel well panel nearest the sidemarker lights, pull the bumper cover off slighty fron a plastic snap lock that lines up the bumper with the fender, you should see the bolt as soon as you pull the bumper cover. Each bolt is a 10mm patern so I recommend a small ratchet with extension, once you remove the bolts, the headlights come right off. You might have a rubber cover over where the headlight bulbs are located, simlpy unscrew it, or pull it off whatever your vehicle has, I believe the bulb type is H7, its a standard low-beam bulb, keep in mind the passengerside headlamp is attached to the windshield washer refill reservoir which snaps in and out of place. Install is reverse procedure, I hope this helps, and if you need, go to Newcelica.org for ANYTHING Celica related.

Aug 11, 2010 | 2000 Toyota Celica

1 Answer

How to change the headlight on a 2004 bmw 5 series


if you have an entire headlight assembly (in case of accident) remove bumper, there are 8mm screws on the inner lining of the fron wheel well where the fender plastics and the air dam connect to the bumper, undo the screws concerning the bumper on bot sides of the car. then remove the plastic cover under the bumper (either philips screw heads or 10mm) and then under the aluminum re-enforcement strip behind the bumper (access from under the car) remove the torx screws that hold the bumper aluminum to the car frame, get a friend to help you pull the bumper off evenly an then seek the 8mm screws that hold the headlamp in place. the headlamp comes off the car strait out the direction of the front. disconnect the wires and connect the new lamp and fasten to the car. then do the assempbly in reverse order for the bumper installation.
for just changing the bulb, there are some rubber seals behind the light where the bulb rests. there are metal clips than you depress to release the bulb. install a new bulb and then replace the rubber caps.

Nov 07, 2009 | 2004 BMW 5 Series

1 Answer

1994 corolla. minor accident pulled rear plastic


check for burnt fuse and wiring damage at bumber causing short condition!

Jun 22, 2009 | 1994 Toyota Corolla

1 Answer

How do I install front & rear bumper covers on a 1999 Honda CRV?


hi there try this site for a full manual for your car
http://www.haynes.com/products/sfID1/3/sfID2/5/sfID3/62/listPage/2/productID/202
it will give you a step by step instructions for your repairs
regards JR

May 29, 2009 | 1999 Honda CR-V

1 Answer

Check Engine Light is Staying On


I agree with timmyb187. The dealership will test for codes and see exactly what sensor might be putting that light on. Under the bumper are sensors for the airbag. There could be a harness that got cut because of the accident.

Jan 20, 2009 | 2005 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Toyota Corolla Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...