Question about 1995 Saturn Sl

3 Answers

95 saturn sl 2 5 speed manual transmission, clutch pedal is fine. shifter wont go into gear

Posted by on

  • Anonymous Mar 15, 2014

    how do you remove shifter on 6 speed eaton manual transmission in a freightliner fl70

  • Anonymous Mar 30, 2014

    1995 SL Saturn cuts out and stalls after flooring gas pedal

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

This vehicle has a pair of shift cables which attatches to the shifter and runs to the transmission shift housing.To diagnose,removal of the center console is in order so you can inspect and verify the shifter/cable connections and movement,then verify the cables move the linkages properly at the transmission . These cables are a fairly common failed part and sold as the set,these are a dealer item and no aftermarket cables are available .

Posted on Sep 10, 2009

Testimonial: "That was nthe problem thanxs!"

  • gloria guerrero Jun 23, 2012

    how would i get access to my shift cables?

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check the linkage that go on the transmission see if they r lose and the monts to if they go bad it will do that

Posted on Sep 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Saturn Master
  • 1,632 Answers

Rock car back and forth
check oil in transmission
go through all the gears starting from reverse.
vitally

Posted on Sep 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 saturn sl it was driving fine for two months with a little grinding going into first and second gear. I went out this mourning and started moving going over a speed bump I pushed the cluth in I...


take the console out and look under the shifter, if the shifter cables are disconnected from the shifter go to a parts store or ebay and get yourself a Saturn shifter bushing repair kit. happens all the time to S Saturns and maybe the Ls look on youtube for instructions to remove console and put on the bushing kit.

if the shifter cables are still connected you may have to be looking around for a lower mileage used transmission. 96-98 saturn will fit so long as the donor car has the same head, being DOHC or SOHC. so if you have an SL1 you can use a transmission out of another SL1, or an SC1, or an SW1. do not mix a 2 with a 1, bad mojo.

Sep 21, 2011 | 1996 Saturn SL

1 Answer

20004 Saturn i am having shifting problems will not go into gear smoothly,if at all . 5th gear in nearly impossible to find with out grinding . Is it the shifter ,clutch or clutch pedal not engaging?


Possible causes are: The clutch is going out, the hydraulic clutch system is low on fluid, or the transmission input shaft is binding on the pilot bearing. 1. Is the pedal firm and does it feel like it used to? (low fluid). 2. Once in gear and moving push on clutch and notice when the transmission disengages. If it does not disengage until the pedal is almost at the top then the clutch is getting thin and will need replacing. 3. With vehicle on a smooth flat surface, depress clutch and try to shift into any and all gears. Notice if vehicle tries to lurch forward as shifter goes into gear. This may be a subtle lurch but should be noticeable. This checks for a binding pilot bushing. Let me know what you find. Thanks and please rate.

Sep 05, 2011 | 1999 Saturn SL

1 Answer

Clutch pedal goes all the way, speeds dont fall. Saturn 99 sl2 manual transmission. Recently engine replace


You need to adjust the clutch cable. It runs from the fire wall to the shift lever on the back of the transmission.

Jun 12, 2011 | 1999 Saturn SL

1 Answer

Major trouble getting the 5 speed to shift into gear. I have to shut the car off put in gear and then start it in gear with the clutch depressed. Is this a clutch problem,linkage or gear oil deficit in the...


Good Evening, mostly your transmission is good. I would be questioning the the condition of your clutch disc, but first I would have to say clutch master and or slave cylinder. I have had a few run across the lot where the clutch master cylinder has leaked internally just up above your clutch pedal where the rod goes through the firewall. let me know what you find, and when was any clutch work done.

Oct 02, 2010 | 1997 Saturn SL

1 Answer

Shifter feels fine and so does the clutch pedal but only goes into first none of the other gears please let us know im thinking about buy this car thanks its a 91 saturn sl


Keep the hell away from it, many things changed after the first model year which was 91, Spend another 50 bucks and get a 92. Pull up the shifter boot and look at the shift cable ends where they attach to the bottom of the shifter. Most likely the bushings will be broken.

Feb 23, 2010 | 1991 Saturn SL1

2 Answers

Will a 95 saturn 1.9 manual transmission bolt to a 98 saturn 1.9 automatic transmission?


This is the automotive equivalent of a ***-change operation. In short, dont do it...
The problem you have is not if the tranny will fit (which it won't as a direct bolt-in replacement), the problem is in everything else that needs to be moded. Your engines computer is not programed to recognize or work with a manual tranny. You would need to modify the console to accept a manual shifter, install a clutch and clutch pedal assembly, plumb the needed fluid systems, and replace the entire wiring harness in the engine bay. In short, if you are asking - this won't go well and even if it did work, the car would not be reliable. By the time you spend everything involved in this project, it would be much cheaper to buy a 95 or 98 Saturn with the transmission that you prefer.

Sep 23, 2009 | 1998 Saturn SL

1 Answer

1999 Saturn sl with shifting problems first gear and reverse


Ms Derry ,I would check the pair of shift cables and shifter itself before suspecting internal transmission problems.The cables attach to the shifter then runs to the linkage on the transmission.One cable is responsible for side to side movement as the other is for moving front to back(like 1st to second) Center console removal is fairly simple which requires mounting screw(4) removal on the front sides and in the rear cup holder.This gives you an opportunity to view the shifter and cable operation from above while this movement should also be appreciated at the transmission linkage meaning someone shifts the vehicle as another inspects proper movement at the transmission.If all this is actuating properly,you may need to tear down and inspect transmission but hopefully it can be rectified with external repairs mentioned...good luck

Aug 25, 2009 | 1999 Saturn SL

3 Answers

I have a 1999 Saturn SL 5 speed manual transmission. When I press on the clutch is squeaks. In the past I put some grease on the shaft above the clutch petal, it worked - now it doesn't. It also seems to...


check for leaks on master cylinder if you haft to add brake fluid its definately leaking,throw out bearing maybe going out?may of glazed pressure plate? good luck!!

Jun 21, 2009 | 1999 Saturn SL

1 Answer

1992 Saturn 5 Speed Manual Locked In 1st Gear


indicates syncro ring or gear problem in the transmission

Jul 09, 2017 | 1992 Saturn SL

2 Answers

Manual transmission


It sure sounds like a clutch problem, You describe needing more RPM's which indcates a slipping clutch. If the shifter goes into each gear but the car doesn't move your clutch is gone or the linkage is stuck or inoperative. hope this helps, Chuck

Mar 15, 2009 | 1996 Saturn SL

Not finding what you are looking for?
Cars & Trucks Logo

1,399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...