Question about 2000 Ford Crown Victoria

2 Answers

1999 ford crown vic dash light running light problem.

Brake lights headlights turn signal dome light hazard's work fine replaced headlight switch still no parking lights or dash lights.can only drive during the day fuses all check out fine any info will help thanks.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Ford Master
  • 1,632 Answers

Check all the bulbs at tail end for parking and brakes, test grounds and harness for trailer. Check fuses. clean batery terminals, Re instal head light swich properly and make sure all wires conect.
Vitally

Posted on Sep 09, 2009

Testimonial: "thank you for quick response will try all of your suggestions will re post if no luck."

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 70 Answers

Check to make sure you have current on both sides of parking light fuse- a WIRING DIAGRAM can really help- from experience most cars do have their tailights and dashlites on the same fuse.

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I have a 1995 ford mustang and im experiencing something kinda werid if i let the car sit for more than a couple of hours my dome light doesnt work when i open the door but i can pull the headlight switch...


If you have a light control module then that is probably failing. However if the dome light is activated by small switches in the door pillars it is possible that the contact points may be rusty or have a bad earth.

Dec 20, 2014 | 1995 Ford Mustang

1 Answer

No turn signals flashers or brake lights


There is switch at brake pedal under the dash. Might check to see if it is working or disconnected.

Aug 16, 2013 | Ford ZX2 Cars & Trucks

2 Answers

My 2005 Crown Victoria .....Brake lights just stopped working (upper light also) All other functions work fine(hazards,turn signals & running lights) Just replaced the brake switch & there st


change the light control module. it is located under the dash near your right knee on the drivers side. this is a common problem with crown vics.

Feb 11, 2013 | 2005 Ford Crown Victoria

1 Answer

Electrical Problems...


I just bought one myself, on a 97. When cops rip out their equipment they mess up a lot of things so a person has to repair them. Mine was to where no body could get in the truck and couldn't figure out "how" to open it. Some dash lights didn't work, windows didn't work, engine hesitated, etc but only had 123,000 miles on it. All problems fixed now and car is great within two weeks. Yours sounds like you will have to trace "all" your electrical harnasses. That's what I had to do and repair all the damages or buy a whole new harnass for the car front to back.

Sep 01, 2012 | 2001 Ford Crown Victoria

1 Answer

Rear brakelights and turn signals do not work


The turn signal and brake lights are controlled by the turn signal switch.
You did not mention parking lights so I will assume they work.

Could be a faulty turn signal switch or a wiring problem between the dash and the rear of the van.
Do the hazard flashers work on all four corners ?

Jun 27, 2012 | Ford Windstar Cars & Trucks

2 Answers

My headlights go out after driving 5 - 10 minutes, I have been told that it could be the Lighting Control Module, the light switch or the multi-function switch. How do you go about checking what the...


I'd be willing to gamble everything I own that it's the module. Driver's side of the dash towards the ash tray. 7mm nuts and two plastic clips. I own an '01 Crown Vic and have experienced the same problem. Turn signals occasionally erratic, dome light temperamental, and headlight issues. I don't know if there have been any recalls but you may try looking under Ford's website.

Dec 09, 2010 | 2005 Mercury Grand Marquis

3 Answers

1996 Ford Windstar tail lights and dash lights stopped working


No. All those lights are on the same fuse and are controlled by the headlamp switch.

Make sure that the fuses were all checked on the fuse panel inside the vehicle under the dash. That is where the fuse for those lights is.

Sep 12, 2009 | 1998 Ford Windstar

2 Answers

2000 Ford Vic PI 4.6L no hazard lights, no headlights, no turn signals, no interior lights/dashlights. Does have bypass lights and brake lights. Checked fuses and they are fine...any ideas?


i work on plenty of police and non police crown vics(mostly 2003 and newer) but i am not 100% sure if this car has a LIGHTING CONTROL MOBULE. the newer ones do. this module controls the headlights,interior lights,turn signals.etc. it is a black box located above the brake pedal but off towards the pass. side.not far from the OBD connector.i wanna say it has 2 or 3 electrical plugs. it would also help if you get a WIRING DIAGRAM. i dont know how much they cost but maybe try swapping in a used or alot of times ive been able to open up the plastic "case" and look to see if anything on the circuit board looks burnt. let me know if this helps!

Sep 06, 2009 | 2000 Ford Crown Victoria

3 Answers

Headlights don't work.


There is a circuit breaker inside the headlight switch body. It gets weak over time and use. The breaker is actually mentioned in the owners manual. A new switch is about $75.00 at the local parts store. You must remove the front of the dash to change the switch. Mine would go off and then in about 30 seconds reset and the lights would come back on. I would be driving down the road with my headlights flashing as the circuit breaker opened and closed. New switch = problem fixed.

Mar 02, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
2000 Ford Crown Victoria Logo

842 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...