Question about 1992 Pontiac Grand Prix

1 Answer

Want to wire up toggle switch to run turn signals on car.have 3 way toggle,pw on middle post,switch up pw out to flasher to lite fixture. just lites up no flash. am i wiring wrong?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 4,336 Answers

WEll, that is one idea, but I reccomend against it, as the brake light system is tied into the circuit, commonly. Just fix the t/s switch.

Posted on Sep 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my 2002 Mercury Mountaineer my hazard lights work inside on dash and outside in vehicle but my turn signals does not work left or right from inside the dash or outside can you tell what is wrong


https://s17.postimg.org/rszkodgnj/turn_signal.jpg

Click on the link.
See the lite blue wire that carries voltage from flasher to multifunction switch, with the turn signal on, that wire should be hot, use a test light to check for voltage. If wire is hot, I think the multifunction switch has a problem. If it isn't hot, I think the flasher has a problem or that wiring circuit.

Apr 10, 2017 | 2002 Mercury Mountaineer

1 Answer

All done lights flash on and off and the turn


The wire for a door switch is laying on the flasher terminals where the e is crimped to the socket for the flasher. Move the wire and the flasher will flash correctly and the dome lite will work correctly too.

Aug 28, 2014 | 2008 Ford Edge

1 Answer

Dodge ram 1500 wiring diagram


Three places to look. 1) Brake lamp fuse, 2) Turn signal switch and 3) the brake pedal switch. Brake light power comes from the fuse up to the turn signal switch down to the brake lite switch on the brake pedal and then on to the light bulbs. Start by putting the 4 way flasher on. If the brake lites flash, then the bulbs are good. That eliminated the fuse too. so the problem is the other two.

Jan 24, 2014 | Cars & Trucks

1 Answer

2002 Pontiac Montana, electrical short Maybe?


I assume that you have checked the signal lite flasher.no other ideas
hope it helps
Regards

Mar 14, 2013 | Cars & Trucks

1 Answer

Heater, turn signals and rear wiper do not work


https://s9.postimg.org/4k77afpa7/turn_signal.jpg

Click on the link. I looked at turn signal wiring. Check fuse 15--20 amp under hood fuse box. Not only check the fuse, use a testlight and check fuse circuit for voltage, hot all the time. At the combo flasher, there is also, ignition/run voltage, goes hot with the key on, you can see wire color.
There could be other issues. As you can see, turn signal switch is part of ground circuit.
I could post whole diagram on one link, but, too small to read. Usually with multiple issues, I just pick one and check it out. Fixing one issue may or may not fix the others?

Jun 29, 2017 | 1996 Plymouth Voyager

1 Answer

My left turn signals don't work.you can hear the clicker working normal and the courning lite come on. If you leave the signal switch on the turn lite will flash once in a while and also the lite on...


You most likely have a bad bulb, if the front bulb goes the rear wont work and vise versa both bulbs must be good to complete the cirrcut. Even though you have no lights you should still hear the flasher relay. Bulbs are cheap just replace both and you'll be good to go. Good luck

Aug 18, 2011 | 2001 Buick Park Avenue

1 Answer

When you turn on headlight switch, the running lights come on but not the headlights. I have the lights hooked up on a toggle switch and they work fine that way. I have tried changing out the headlight...


have you checked your dimmer sw, sometimes this is it...did the hd lite problem show up when you put the toggle on, if so look for a ground....also trace the red wire from the head lites to a junction where the lites get their voltage....good luck

Feb 26, 2010 | 2003 Jeep Wrangler

1 Answer

My 97 Licoln Town car 4 way flashers, turn signals and brake lights(except for the center inside lite) stopped working. Fuses look good and bulbs look okay. When the lights are turned on the front side...


Replace both lights at the back of your car. The fact that you have steady non-flashing lights at the front and no lights at the back is a troubleshooting tool to let you know the back lights are bad.

Dec 19, 2009 | 1997 Lincoln Town Car

2 Answers

1997 sonoma turn signal flasher


it is inside, under dash, on left side is a plastic sound protector, mine had 3 screws holding it up, drop this down and straight in you will see a 1" round thing - this is the flasher, pull it out and replace with new one (there are two flat prongs that plug in). It appears this is a well guarded secret!

Aug 26, 2008 | 1997 GMC Sonoma

Not finding what you are looking for?
1992 Pontiac Grand Prix Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...