Question about 1993 Buick LeSabre

1 Answer

Passenger side window dont work

Why won't the passenger side window of my 1993 buick le sabre custom work? all the other windows work.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Each window has a little motor that powers it. This may need to be replaced. If you can hear the motor running then the window could have fallen off the track

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The electric windows and door locks only work on drivers side of a 2000 buick le sabre limited. why?


The passenger side locks an windows don't work with thier own switches ? Check for B+ voltage at the front passenger door module . Do you know how to do that ? You need to take the front right door panel off . Check for a broken wire inside the rubber boot from the body to the door .
Power Windows
The vehicle is equipped with power windows controlled by the door modules. The DDM receives a window switch request, over the SBI serial data, from either the passenger door module wired to the window switch pressed or from the driver door switch assembly. The DDM checks the Class 2 serial data to see if the status information is correct (i.e. ignition switch position) to permit window operation.
If the status information to permit window operation is correct, the DDM sends the command to the door module controlling the window to move the window as requested.

May 21, 2017 | Buick Cars & Trucks

1 Answer

The starter on a 1990 buick le sabre clicks once when trying to start but won"t start


if the starter justs clicks once and all the lights stay bright i would say the starter is going bad. sometimes as a test ,you can tap the starter and if it works, it points to a bad starter

Jan 27, 2013 | 1990 Buick LeSabre

1 Answer

How do you disconnect the lift wire and lock the passenger side windows in the up position on a 97 Buick Le Sabre?


on gm products the drivers door is the master door .the wires run through the switch there before they goto the pass door. pretty easy to figure the wires out.if you cant a local stereo shop thats a viper security dealer can get you a wire diagram for the whole car..ie best buy etc.

Jun 03, 2010 | 1997 Buick LeSabre

1 Answer

1993 buick le sabre 3.8v6.no spark somthing shorted out


those wires are probably going down to the crank sensor if that sensor fails then the car will not start so fix the wiring and try replacing the crank sensor.

Nov 07, 2009 | 1992 Buick LeSabre

2 Answers

I have a 2001 buick le sabre. The rear widow does


That is the problem....however the cable spun off the spool and you need to buy the power window assy. On line it was a good fair price (about $35-50) it has 3 studs that holds it to the inside door and 2 bolts at the window that secures the assy to the window. All work can be completed in 30 mins..

Sep 09, 2009 | 2001 Buick LeSabre

1 Answer

Hot air always, no matter what temp control is set at(1993 Buick)


There is a blend air actuator on the passenger side that causes the blend air door to stay open to heat no matter what. It's below the left side of glove box, facing dash, and you can work it by hand and get it to close. If that works, get a new one. They're very easy to install.

Jan 07, 2009 | 1998 Buick LeSabre

Not finding what you are looking for?
1993 Buick LeSabre Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...