Question about 2004 Dodge Ram 1500

1 Answer

Power windows quit working

One minute they worked fine and now they are dead.It is not the window motors. All 4 windows do nothing. I tried a new switch and that did not work either. Fuse is good.

Posted by on

  • 1 more comment 
  • don_gillett Sep 10, 2009

    It would be extremely unlikely that all 4 motors quit at the exact same time.

  • don_gillett Sep 10, 2009

    this a 2004 Dodge Ram 1500 Quad cab.
    Do you know where the cir.bkr. is located?

  • bulldogchief
    bulldogchief May 11, 2010

    Why do you think it's not the motors?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

There is a 25 amp circuit breaker (may look like a relay) in that circuit as well. Either under hood in power distribution,fuse/relay box or under dash usually.

Posted on Sep 10, 2009

  • Mike Butler
    Mike Butler Sep 10, 2009

    Best I can tell, it 9circuit breaker) should be in the area of the park brake pedal.
    Have you had the switch out and tested for power coming in to switch?

  • Mike Butler
    Mike Butler Sep 10, 2009

    The 9 is a typing error should be (circuit breaker).



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Driver side power window goes down fine, when rolling back up it will go up about 2-3 inches and quit. You wait 5 minutes and it will go up another 2-3 inches. Wait another 5 minutes and you get another...

Motor is overheating due to drag in the window tracks or possibly shorted windings. Try using silicone lube spray in the tracks. If this doesn't work, you probably need a new motor.

Sep 13, 2010 | 2000 Mitsubishi Eclipse

1 Answer

My drivers power window won't work. suddenly quit..depress the window and nothing happens, don't hear anything..all other windows work..need new motor? can i do it myself and save over 300 that the repair...

before you change the window motor check to see if you are getting power to the motor frist it could just need a new window
switch but if you need to change the motor the only thing you need to get the rivets out is a drill and a drill bet and they will come out

Aug 17, 2010 | 1999 Chevrolet Suburban

1 Answer

Window does not go up and down but the power does work to the window.

If you have power to the window when you push the switch up and down and the window does not move then try tapping it while pushing the switch.If it moves then you need to replace the window motor.What happens sometimes is they hit a dead spot and will not work.I have had a few of these do this and when I tapped on them they started to work.If you don`t replace it it will eventually find that dead spot again and will quit working.It is best to replace the motor.Hope this helps.Good luck.Let me know what you find.

Jul 01, 2010 | 2003 Chevrolet Impala

1 Answer

2002 olds alero power windows both quit working

undo door panel, apply 12v directly to window motor, if nothing happens replace window motor

Jun 19, 2009 | 2002 Oldsmobile Alero

2 Answers

Front windows don't roll down

Yes, the power window switch is often faulty, because there is some sensitive electronic making that "auto rolled down". The 4x-switch is quite expensive, 260EUR =( So, I make some new connection. The faulty electronic is only for front windows, so now I connect wires so that I can use front windows with read window switch. (Rear windows is still working by those 2xback window switch) which is located between seats. Here is the conncection, at one's own risk. That 4x-window switch has 14-pins connector: Connect the back windows wires 8(blue/white), 9(red/black), 1 (grey/blac ), 2 t(green/white) to the ground wire 4 (black). Front windows wires 14(blue)->8 13(white)->9 3(white/violet)->2 7(black/blue)->1 If the manufacturer didn't use that "auto rolled down" function, there is no worries of power windows. Also illumination of 4x-switch goes down quite soon, leds will be better. Here is a photo if you like replace bulbs to leds:

May 30, 2009 | 2002 Chrysler PT Cruiser

3 Answers

RF power window not working properly on 2001 toyota highlander

There should be a relay. Probably located in the PDU box under the hood. If not the motor might be going bad.

May 24, 2009 | 2006 Toyota Highlander

1 Answer

Pass. front window won't move.

I would check the power first to the motor.
IF the power to the motor is good. Then safe to say the motor/ regulator assembly should be changed.

Apr 04, 2009 | 2003 Pontiac Grand Prix

1 Answer

Power window not working

it sounds by the motor clicking that your power window motor is shot.....If you jump 12 volts to the terminals on the motor does it work?.................if it does you can at least get it up.......if you put the power to it and it goes down reverse the wires on the terminals and it will go up.But it sounds to me like you need a new one.
hope this helps!..............Good luck!

Jan 11, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

3 Answers

2000 GMC Jimmy SLE driver's power window

The same thing happened to my 1999 JMC Jimmy recently. I believe the problem is that your power window motor has most likely gone out or is starting to go out. The motor will need replaced. They are pretty expensive new. I went to a junkyard and got one for around 15 dollars. When mine went bad, I had rolled my window down about three or four inches and it stuck there. I took my door panel off and tapped on the motor while holding up on the window switch and got it to go up after a few minutes. I am replacing my motor today, I'll leave an update here about the outcome when I finish the job. I hope this information helps you.

Sep 27, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides