Question about 2000 Volkswagen Jetta TDI

2 Answers

No blinkers or hazards...

First, the one blinker (rear passenger side) quit working...now both blinkers and the hazards are gone...?
thank you..
>ash<

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Volkswagen Master
  • 2,899 Answers

Flasher and fuses are usually under the dash next to the drivers left knee.
Hope this helps.

Posted on Mar 19, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Check the fuses in the fuse panel area. Check to see that the bulbs are good. Good Luck, Jim

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2002 camaro , the 4 way lites work , head lites an tail lites work passenger blinkers work but when i turn on drivers side blinkers the only thing that happens is it lites up on the cluster panel


This means that either your front or rear blinker light on your drivers sides is not working. Activate your hazards by pulling up on the knob on your steering column labeled by the orange "hazard" cone insignia.
Then check to see if either the front or the rear driver-side blinker is not working. This one will need to be replaced for both of them to work correctly.

Feb 17, 2011 | 2002 Chevrolet Camaro

1 Answer

Just change the bulb for the front left blinker on my wifes Fusion. Still no blinker. The rear works and front and rear work on passenger side. Could it be the relay, or is it something in the computer?


It sounds more like wiring or a loose plug to it.Does the light work when the hazards are on?The relay would affect them all not just 1 light.If it also doesn't work with the hazards,you need to just turn the wires to the connectors and right at the connector in circles with the blinker on and see if it comes back at all.Please let me know if anything turns up or not and we'll see what else we can do.Good luck! Greg

Sep 04, 2010 | Ford Fusion Cars & Trucks

1 Answer

Holden barina left hand sideblinkers not working


check the turn signal relay that usually goes before the fuse

Feb 23, 2010 | 2000 Daewoo Korando

1 Answer

Brake lights gone, hazards and blinkers work. fuses are good


Replace the turn signal switch. The 2 lower brake lights run through this swith but the upper one does not. Let me know if you have any questions. Its not a hard oub if you are fairly mechanical. I expensive to have a dealer do. The part new is about $65.00.

Nov 09, 2009 | 1997 Chevrolet Lumina

1 Answer

1999 Jeep Grand Cherokee Laredo. The front left


Try the hazard switch.Do all the blinkers work?This may be a loose connection to the lamp.The window and lock system are on seperate circuits so very unlikely they are related.There is a seperate relay for the blinker and hazards,so a single blinker not working is either bulb or wiring.Widows are operated by motor so check the fuse, wires and and actuating switch. (Door trims off).Also check its not just jammed.Locks,check fuses,switch wires for damage or looseness and the actuator is working.Check the actu. rods are not loose are bent.(need the door trims off for this).Quite a few different things but hope this helps

Sep 11, 2009 | 1999 Jeep Cherokee

2 Answers

My Passengers side blinker does not work. it is not the bulb.


if you turn your blinker for passenger side on and if it blinks faster than normally you have a blown bulb

Sep 07, 2009 | 2003 Saturn ION

2 Answers

07 Canyon Blinker issue


When one side blinds faster than the other, the side than blinks faster means a light bulb burnt or not making contact. Are u sure the hazard light are the same with the blinkers

Jul 24, 2009 | 2007 GMC Canyon Crew

1 Answer

96 accord blinker short?


replace the turn signal switch.

Dec 26, 2008 | 1996 Honda Accord

Not finding what you are looking for?
2000 Volkswagen Jetta TDI Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...