Question about 2002 Hyundai Accent
Check this reference guide...
2002 Hyundai Accent Car Lightbulb Size Guide
Low Beam Headlight Bulb Size: 9003/HB2
High Beam Headlamp Light Bulb Size: 9003/HB2
Parking Light Bulb Size: 2357A
Front Turn Signal Light Bulb Size: 2357A
Rear Turn Signal Light Bulb Size: 1156
Tail Light Bulb Size: 1157
Stop Light Bulb Size: 1157
High Mount Stop Light Bulb Size: 921
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 1156
Front Side Marker Light Bulb Size: 2357A
Rear Sidemarker Light Bulb Size: 168
Map Light Bulb Size: DE3175
Dome Light Bulb Size: DE3175
Step/Courtesy Light Bulb Size: DE3022
Trunk/Cargo Area Light Bulb Size: DE3022
From Sylvania Lamp Replacement Guide
168LL Long Life Upgrade: Up to twice the life of the standard lamp.
I hope help you with this. Good luck (remember rated this help).
Posted on Sep 09, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
OK>>> it is very cold here, but nonetheless..I went outside to check on my Oldsmobile for your benefit....On mine (I can't guarantee it is the same for all of the vehicles listed above). If you are looking at the license plate, LOOK UP and you should see the bulb and whatever encasing is there. Mine is in a tube and it is attached with (2) mini bolts that will need to come out first, then it just looks like a simple matter of disconnecting the electrical plug, taking out the old bulb and putting the new one in. I hope this helps someone....
Posted on Feb 23, 2009
LICENSE PLATE LAMP BULB
Posted on Oct 08, 2009
SOURCE: License plate bulb replacement
First off, you have to remove the truck lid liner to a point where you can access the light plug from inside (The light cover will not come out without taking the socket and bulb out first). Twist the light plug and pull out. Then on the exterior of the light, take a small regular screwdriver and slide it in the slots on each side of the light cover assembly and push towards the center of the light. This will release the plastic clips and allow you to pull down on the light cover. Do this to each side, then pull down and out towards you to get the light cover off. Install in reverse.
Posted on May 17, 2011
Tips for a great answer:
Jan 24, 2016 | Cars & Trucks
Dec 10, 2015 | Ford Cars & Trucks
Aug 30, 2015 | 2001 Toyota Tacoma
Sep 09, 2012 | 2006 Scion xA
Jan 15, 2011 | 2003 Lincoln Town Car
Mar 08, 2010 | 2000 Buick LeSabre
Mar 05, 2010 | 2001 Buick LeSabre
Feb 06, 2010 | 2003 Chevrolet Impala
1,672 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: