Question about 2001 Chrysler Sebring

2 Answers

How many oxygen sensors in a 2001 chrysler sebring 3.0

Posted by on

  • wbuker12 Sep 10, 2010

    JZLimited,

    On the picture above for the 2.7 liter engine, are these sensors located on top of the engine if I am looking under the hood? The picture looks like the oil dipstick is on the left side.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 17,970 Answers

how many oxygen sensors in a 2001 chrysler sebring - 17c3292.jpg

Fig. Heated Oxygen (HO2S) location (sensor 1)-2.4L engine

db6f426.jpg

Fig. Heated Oxygen (HO2S)how many oxygen sensors in a 2001 chrysler sebring - 99e413c.jpgsensor 2)-2.4L engine

99e413c.jpg


e2a250f.jpg

Fig. Heated Oxygen (HO2S) location (bank 2, sensor 1)-2.7L engine

I hope help you with this (rated this help). Good luck.

Posted on Sep 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 254 Answers

Since 1996, most vehicles are fitted with 2 oxygen sensors. There is one upstream from teh cataytic converter and one downstream, just behind the catalytic converter. The upstream O2 sensor is generally the one that fails first, but if the check engine light is on, check to see which fault code the computer is setting. If it's #1 Oxygen sensor, then the upstream one is at fault. (#2 is the downstream sensor.)

I hope this helps! :)

Posted on Sep 09, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: i have a 2001 chrystler sebring coupe lxi 3.0

Bank 1 is the exhaust manifold at the firewall, sensor 2 is the O2 sensor after the catalytic converter.

Posted on Nov 17, 2009

  • 88 Answers

SOURCE: Bank 1 Sensor 1 - Oxygen sensor needs to be

The sensor you indicate would be on the manifold of the head containing cyl.# 1, top sensor (prior to catalytic conv.) 6 cyl. engine. 4 cylinder would be sensor on exhaust manifold. Confirm sensor failure prior to replacing as chrysler harness connectors are known for pin failures at 02 sensor connections. Inspect for burnt pins and cracked/chaffed wires first before changing sensor.

Posted on Jan 30, 2010

c17hydro
  • 2984 Answers

SOURCE: can anyone tell me where the camshaft positioning sensor is located on my 2001 c

It is located on the front of the motor....looks like this:

ec850f7.jpg

Posted on Mar 14, 2009

  • 13 Answers

SOURCE: Why does 2001 Chrysler sebring A/C cuts in and

It's low on refrigerant ( probably uses R-134a) available at WalMart. Low refrigerant pressure switch deactivates A/C compressor for safety reasons.

Posted on Sep 08, 2009

01fordeb
  • 1033 Answers

SOURCE: oil sending unit on 2004 chrysler sebring V6

Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove

Posted on Jan 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Locating rear heated oxygen sensor bank 1 on 2.4L 2004 chrysler sebring


It is the sensor that is just behind the last main catalytic converter in the exhaust. If I had the code I could help more.

Feb 10, 2017 | 2004 Chrysler Sebring

1 Answer

I get code PO 135 Bank 1. where is this sensor located on a 2003 Chrysler Sebring lxi 3.0


Hi Russel,here's a link showing you your oxygen sensor,it's the second picture.It's screwed in right before that cat as you see. It's close to the firewall side.Repair Guides Components Systems Heated Oxygen Sensor AutoZone com Here's a link to a new one. Bosch Oxygen Sensor 15514 Read 1 Reviews on Bosch 15514

Dec 17, 2016 | Chrysler Cars & Trucks

1 Answer

How to change the upstream oxygen sensors on 2001 chrysler sebring 2.7


It's pretty easy. Spray it liberally with solvent to work on the threads. PB blaster, or Liquid Wrench. There is a special socket at parts stores (looks like a sparkplug socket with an opening for the elec. connector). Don't always need it, most have mounting bolts now. I use anti-seize compound on the threads, in case you ever want to remove it again. Be sure and take negative cable off before beginning.

Nov 20, 2011 | 2001 Chrysler Sebring

1 Answer

It will be very much appreciated if you could send me the information about how to replace the O2 sensors on a 1998 chrysler sebring convertible.


Hello, Eventually your Chrysler Sebring's oxygen sensor will go bad and need to be replaced. The oxygen sensor regulates the oxygen-to-fuel ratio in your vehicle. It also controls your gas mileage. It senses when more or less oxygen needs to be pumped into the fuel lines. If it fails, your Sebring will run poorly and won't get very good gas mileage. Knowing how to change it yourself can save your money. Here are the instruction to change o2 sensors.
Locate your Sebring's oxygen sensor on the pre-catalytic converter. This is located near the front right wheel well of your vehicle. Apply some anti-seize paste to the threads of the new oxygen sensor. Be careful not to get any of the paste on the sensor itself, or it will be ruined. This makes for easy removal of the sensor next time.Remove the old oxygen sensor, using the 7/8-inch wrench. Find the stock sensor wire near the engine-loop lift. This will be by the firewall of your Chrysler Sebring. Splice the stock sensor wire and connect it to the new oxygen sensor's wire, using crimp connectors.Remove the large air-intake pipe that runs from the air box to the rear turbo. Then remove the two smaller air pipes that run from the air box to the blowoff valves. This will give you access to the oxygen sensor. Soak the old oxygen sensor in WD-40 to loosen it. Screw in the sensor by hand. Use the wrench to fully tighten the oxygen sensor so it cannot be removed by hand. Replace the air pipes to the correct valves again.

  • Rate me if you like my answer..


    Thanks

  • May 20, 2011 | 1998 Chrysler Sebring

    2 Answers

    How many oxygen sensors does a 2001 Chrysler Sebring have with the 2.7 liter engine


    It has two sensors...

    Check the below link for pictures

    http://www.fixya.com/cars/t2915557-many_oxygen_sensors_in_2001_chrysler

    Aug 30, 2010 | 2001 Chrysler Sebring

    2 Answers

    Tire specs for 2001 chrysler sebring


    HI. Here is the complete line up of specs concerning your vehicles front and rear tires. You did not post the trim line of this car, so I posted all models and tire combination's specified by the manufacture.


    2001 Chrysler Sebring Lim 2 Door Convertible Front and Rear Tires P205/60R16
    2001 Chrysler Sebring LX 2 Door Convertible Front and Rear Tires P205/65R15
    2001 Chrysler Sebring LX 2 Door Convertible Front and Rear Tires P205/60R16
    2001 Chrysler Sebring LX 2 Door Coupe Front and Rear Tires P205/55R16
    2001 Chrysler Sebring LX 4 Door Sedan Front and Rear Tires P205/65R15
    2001 Chrysler Sebring LX 4 Door Sedan Front and Rear Tires P205/60R16
    2001 Chrysler Sebring LXi 2 Door Convertible Front and Rear Tires P205/60R16
    2001 Chrysler Sebring LXi 2 Door Coupe Front and Rear Tires P215/50R17
    2001 Chrysler Sebring LXi 4 Door Sedan Front and Rear Tires P205/60R16

    Jul 06, 2010 | 2001 Chrysler Sebring

    2 Answers

    On a 2001 chrysler sebring coupe lxi 3.0 where is the O2 "oxygen sensor" physically located, computer says bank1 sensor2. I know Bank 1 is the side where the #1 cylinder is which I "think" is on the...


    the only sensor that would be on your manifold would be the o2 sensor ihave an intrepid i have four, two converters. 1 before each converter and 1 after each converter. fronts are 1s and backs are 2s all are 4 prong maybe your backs are threes you will need to investigate a little more after all we are dealing with pretty much the same car same year

    Jan 11, 2010 | 2001 Chrysler Sebring

    2 Answers

    2003 chrysler sebring is hesitating whn at higher


    (Fuel filter will not effect anything, it only prevents build up in engine)
    Could be one of these-
    Oxygen sensor
    fuel sensor
    Dirty injectors
    Bad injector/injectors

    ~~~~Go to car zone/ or a frendly auto part store, and ask them for a FREE electronic computer check ( where they check the computer, and the computer tell them whats wrong)

    Sep 28, 2009 | 2003 Chrysler Sebring

    Not finding what you are looking for?
    2001 Chrysler Sebring Logo

    6,600 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7688 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...