Question about 1993 Jeep Grand Cherokee

1 Answer

When i start engine in 2003 jeep it want stay started .

When starting engine it want stay running , after about 1 minute it stalls . I can also drive jeep cherokee 2003 it will also stall . It has 137000 mi.

Posted by on

  • brooksyalamo May 11, 2010

    push the security remote so security on dash goes out

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Sounds like either the sock on your fuel pump might be cloged or something more serius your cracnk shaft position sensor is gone. or the map sensor is not sending the right mixure of gas n air

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

99 jeep grand cherokee 4.0 starts but wont stay running. no check engine light on


Many issues will not set a code so start with basic troubleshooting. Is fuel pressure correct? Is EGR dirty or sticking open? Is IAC dirty or sticking? Is compression correct? Bad coolant temp sensor, bad O2 sensor, clogged exhaust or converter all can cause this, even a bad vacuum leak!

Jul 16, 2015 | Jeep Cars & Trucks

2 Answers

STARTS BUT WON'T STAY RUNNING


Could be something as simple as a dirty fuel filter.
Get a can of quick start at the store and have someone start it up, when it wants to die squirt a shot into the intake ... if it runs again for a bit you have a fuel delivery issue. Check the fuel pressure to see if the pump is functioning properly.

Mar 18, 2015 | 1997 Jeep Grand

1 Answer

2008 Jeep Liberty Starter Issue


cant figure out your post at all !
"When my car will not start it only growls & never roars/never turns over."
it either cranks robustly nor not
then and only the can it start, run
cranks
starts
runs
or maybe stalls
the dealer can fix it , if you demo it and it works.
its not broken then.
if it cranks correctly every time ,say so
that is a failed engine start.
if engine stalls, say so.
if rpm on the engine is real low, too low, say so.

the word turns over means nothing, Im sorry
1/2 say, it means cranking
other 1/2 means its running,
the order is
cranks, starts, runs , and keeps running or stalls.
btw if it stalls, its needs a tuneup'
get one in last decade, (sparks filters)
my guess growls is starter sounds
so if it starter works try cranking with throttle wide open
this is super secret unflood mod. it cuts fuel and clears flooding.
Good engines that fail to start are
bad spark plugs
flooding
starving for fuel.
we discount them 1 by one until. bingo

Mar 08, 2017 | 2008 Jeep Liberty

1 Answer

Jeep liberty 2002 3.7when starting cold starts-stalls unitl hot


Check the temperature sensor feeding the ECU and O2 sensor.

Apr 12, 2010 | 2002 Jeep Liberty

2 Answers

I have a 1990 civic si with a intermittant start and stall shut off warm put fuel in it go to start and stalls do this two or three times and stays running may not happen for a week or two or will happen...


well i had this trouble with one came in with out haveing a scan tool witch you sold,cheers,regeehould invest in most canadian tire stores carry $30-$50 bucks well worth it you do not want to gue$$ this problem but souding like 02 sensor in manifold bank 1 meaning 1st one in the exsaust engine manif

Dec 23, 2009 | 1990 Honda Civic

1 Answer

Jeep wont run at idle. pump gas pedal to get it to start


have you tried cleaning the idle speed control valve? use this procedure.
Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Aug 10, 2009 | 2003 Jeep Liberty

1 Answer

96 Jeep Cherokee stall then hard/no start


change fule filter if nothing changes do fule pressure test

Feb 11, 2009 | 1996 Jeep Cherokee Country

1 Answer

Won't stay running


sounds like you have a bad ECU unit. have it checked.

Dec 28, 2008 | 2002 Jeep Grand Cherokee

1 Answer

No power to dash or dome light in 2003 jeep tj.


As far as the guage issue it is most likely a problem with the body control module, have a trouble code test run on the BCM to determine the issue, the stalling is caused by the loss of the idle strategy learning when the battery went dead, the best thing to do is the following procedure I use to clear this issue.

Here is the most common cause of surges and stalls (or very low idle) near or at idle, it is the idle speed control air-bypass valve and throttle valve, they get full of gunk over the miles and cause idle issues (stalls) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Nov 20, 2008 | 2003 Jeep Wrangler

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...