Question about 1998 Hyundai Tiburon

2 Answers

Do i have to pull the engine 98 tiburon to replace water pump. do i have to take off the timing belt?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Posted on Sep 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You shouldnt it might just be harder to work on it

Posted on Sep 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change on a water pump on a 98 vw beatle 2.0


The water pump is run by the timing belt on that vehicle so you would need to research timing belt replacement for the 2.0l engine.

Nov 20, 2013 | 1996 Chevrolet Camaro

1 Answer

REPLACING THE TIMING BELT ON A 98 VW


you definitely need to replace the belt and water pump and sometimes the tensioner. i would recommend a high mileage belt and a water pump with a metal impeller.
failure to replace the belt immediately can cause severe engine damage.
believe it or not there is a youtube video that shows how to do the belt on a new beetle.

Sep 15, 2012 | 1998 Volkswagen Beetle

2 Answers

I have no clue on how to replace water pump on a 1995 chrysler cirrus 2.5L. I have to do this myself I dont have the money for a garage.


This is found on the autozone.com website.

2.5L Engine
See Figures 3 through 7
  1. Disconnect the negative battery cable.
  2. Place a large drain pan under the radiator drain plug. Drain and properly contain the engine coolant.

This procedure requires removing the engine timing belt and the auto tensioner. To help assure proper alignment at assembly, it may be helpful to set the engine at TDC on No. 1 compression stroke. This should align all timing marks on the crankshaft sprocket and both camshaft sprockets.
  1. Remove the accessory drive belts and crankshaft damper.
  2. Remove the right engine mount. This requires safely supporting the engine with a floor jack and wood block so the mount can be removed.
  3. Remove the timing belt covers.
  4. Remove the timing belt and tensioner.



0900c152800896a7.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Remove the water pump mounting bolts


0900c152800896a8.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 4: Pull the water pump assembly off of the engine and inlet pipe


0900c152800896a9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 5: Open the water pump housing and examine for cracks or damage


0900c152800896aa.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 6: Replace the water pump housing gasket using a scraper tool


0900c152800896ab.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 7: Always keep the water pump's mounting bolts lined up with their correct mounting holes

  1. Remove the water pump mounting bolts.
  2. Separate the water pump from the water inlet pipe and remove the pump.

To install:
  1. Thoroughly clean all sealing surfaces. Inspect the pump for damage or cracks, signs of coolant leakage at the vent, and excessive looseness or rough turning bearings. Any problems require a new pump.
  2. Install a new O-ring on the water inlet pipe. Wet the O-ring with water to make installation easier. DO NOT use oil or grease on the O-ring.
  3. Install a new gasket on the water pump and fit the pump inlet opening over the water pipe. Press the assembly together to force the pipe into the water pump.
  4. Install the water pump-to-engine bolts and tighten to 20 ft. lbs. (27 Nm).
  5. Install the timing belt and timing belt tensioner. Set the timing belt tension.
  6. Install the timing belt covers. Install the right engine mount. Remove the floor jack and engine block from underneath the engine.
  7. Install the crankshaft damper.
  8. Install the accessory drive belts and set to the proper tension.
  9. Connect the negative battery cable.
  10. Fill and bleed the engine cooling system.
  11. Start the engine and verify proper operation, with no leaks

Aug 20, 2011 | 1995 Chrysler Cirrus

3 Answers

Where is the water pump located on a 1996 olds aurua the car is over heating


Hi, i would check the thermostat first unless the water pump is leaking as the water pump is where the timing belt is is the timing belt needs removing to get to the pump, take the thermostat out and place it in a tub of boiling water and check if it opens up if it dont then it will need replacing.

you need to bare in mind that it could also be head gasket failure so make sure you get this tested if the thermostat is found to be in working order.

let me know if you need further assistance ok

Sep 14, 2010 | 1996 Oldsmobile Aurora

1 Answer

Where is thw water pump on the 98 honda c-rv


Inside the timing belt cove, water pump is runed by the timing belt, also replace timing belt while in there will save you money and time in the long run, also this engine is an interference engine will cause major engine damage if timing belt goes bad.

Jan 16, 2010 | 1998 Honda CR-V

1 Answer

Change water pump on 2001 hyundai tiburon


It is a 2.0L (the delta blocks weren't in tibs until '03). You have to remove the timing belt tensioner, and then you can remove the bolts for the water pump. I would strongly recommend not only taking careful precaution not to disturb the orientation of the gears in this process, but also to replace the timing belt and water pump at the same time. You don't want to go through this process all over again do you?

Apr 06, 2009 | 2001 Hyundai Tiburon

2 Answers

Do you have to change the timing belt when changing water pump


yes in this case it is correct, the reason is that the water pump and the timing belt runs toghter.. you dont want to change one without the other..

Mar 20, 2009 | 2004 Hyundai Tiburon

1 Answer

Problem with 2003 Tiburon water pump


its driven by the timing belt,it also has a plastic pulley that breaks away from the drive,silly idea but lots of cars use it

Feb 28, 2009 | 2003 Hyundai Santa Fe

1 Answer

00 Tiburon timming problem please help?


i would double check my timing. make sure crank is tdc and cam mark is lined up. if so double check any connectors that you might have disconected

Feb 25, 2009 | Hyundai Motor 2000 Tiburon

2 Answers

I need instructions on replacing the timing belt


1. Remove the Alternator Belt.
2. Remove the Water Pump Pulley
3. Remove the Air Conditioner Belt and Power Steering Belt.
4. Remove the Crankshaft Pulley.
5. Remove the timing belt cover
6. Remove the timing belt tensioner pulley.
7. Remove the Timing Belt.
8. (If Replacing) Remove Idler Pulley.
Installation is reverse of removal. Keep a close eye on the timing marks on the cam sprockets to make sure you don't knock anything out of whack.

I would strongly recommend replacing the water pump while you are replacing the timing belt. (The water pump usually comes in the timing belt kit.) Otherwise you are going to have to do this all over again when your water pump goes out. Good Luck.

Nov 10, 2008 | 2004 Hyundai Tiburon

Not finding what you are looking for?
1998 Hyundai Tiburon Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...