Question about 1992 Mercury Sable

Open Question

Where are the fusible links for a 92 mercury sable

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 11 Answers

SOURCE: Need to know the location

There's many an electrical diagram on line should be easy to find.

Posted on Jan 03, 2011

Ad
Ironfist109
  • 3018 Answers

SOURCE: Where is the Blend door

Hello,
Both are located behind the dash. You have to remove the dash to get to it. You might want to change the heater core while you are back there too. Some will tell you to pull a few bolts and wedge it open just enough to get back there and remove it. If you value how your cars dash looks I would advise against this. Good luck.

Regards, Tony

Posted on Apr 09, 2011

ftw1952
  • 10319 Answers

SOURCE: need to remove rear seat

remove the two bolts on the very bottom retaing brackets
then push the seal as hard as you can straight back to the rear and lift upward
then you can take it out
it will be very hard to push back I have to warn you but it is the way it has to be for saftey reasons

Posted on Aug 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for the alternator in a 2000 murcury sable


There are three fuse's for alternator ! One in the under hood fuse box, F126 30amp, one in the central junction box F227 10amp an there is a 175 amp fuse or fusible link installed in the heavy gage wire from battery to the back of the alternator . Rather then tearing the vehicle apart looking for fuse's , take a volt meter an check the wires at the alternator an see if your missing voltage at any wires . Does the charge light or battery symbol light come on when you turn the key on ? If so you have eliminated one of the fuse .

Sep 13, 2015 | 2000 Mercury Sable

1 Answer

My key won't turn to start my car... It's a 92 Sable Mercury.


Try a lubricant.

Mercury Sable key ? Mile High Locksmith ™

www.denver-locksmith.net/2013/12/mercury-sable-key-replacement/
Dec 23, 2013 - Mercury Sable keys have changed over the years. ... 1991, 1992, 1993, 1994, or 1995, then your car requires two keys. ... If your Mercury Sable was made in the year 1997, then some of the cars will have a transponder key, and some won't. ...Insert the new key into your ignition switch and turn it to the on .

Sep 08, 2015 | Mercury Sable Cars & Trucks

1 Answer

Vacuum line routing on a 92 sable 3.0 need diagram of the lines


There should be a diagram under the hood that shows the hose routing.

Nov 17, 2014 | 1992 Mercury Sable

1 Answer

ALTENATOR NOT CHARGING BATTERY


Check your fusible link.

Oct 24, 2012 | 1996 Mercury Sable

1 Answer

1999 Mercury Sable Wagon battery completely drained


Try test the Mega alternator/ battery fuse, should have power across both circuits.

Jan 07, 2012 | 1999 Mercury Sable

1 Answer

Need to know the location of the fusible link on a 1993 mercury sable?


There's many an electrical diagram on line should be easy to find.

Jan 03, 2011 | Mercury Sable Cars & Trucks

3 Answers

New battery won't charge, alt. good from bone yard, is there a voltage regulater on this car?


The VR is integral to the alternator. Check the fusible link and the 10 amp fuse in the battery fuse box.

7007cd8.gif

Sep 28, 2010 | 2001 Mercury Sable

1 Answer

I have a 92 mercury sable and just put on a starter, previous owner said needed a starter, but still won't turn over, will click though, any suggestions?


Maybe motor is seized, try turning motor over by using socket and strong arm on crankshaft pulley. If you cant do that try on altenator nut it should move at least a little

Jul 26, 2010 | 1992 Mercury Sable

1 Answer

No diagram for 1999 mercury sable for serpentine


Click on the following free direct Link.
It has the correct Belt Diagrams for your 1999 Mercury Sable 3.0L V6.

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1999/make/mercury/model/sable/1999_mercury_sable_drive_belt_routing_diagram.htm

Nov 07, 2009 | 1999 Mercury Sable

1 Answer

92 sable shuts off when slowing down


its over heating, check water pump

Apr 30, 2009 | 1992 Mercury Sable

Not finding what you are looking for?
1992 Mercury Sable Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...