Question about 2004 Chrysler Sebring

1 Answer

Inside door lever does not open the door.

I have a Chrysler 2004 Sebring with power windows and power locks. The driver's side door opener does not work. To get out of the vehicle I have to lower the window, reach outside the door and open it and then raise the window. I believe I need to remove the driver's side door panel to fix or view the problem.

How do I remove the drivers side door panel on the 2004 Sebring?

Posted by on

  • kudratx Sep 09, 2009

    Quick, accurate response and it worked perfectly. Thank you.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,714 Answers

You have to remove any screws on the arm rest first and then any others that you see. Then, slide a screw driver behind the door panel and pop the panel up. It has little tabs that pop out of the retainers. Then you will have access to the door control.

Posted on Sep 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My drivers side window will not go up or down. Also, the door lock/unlock on the same side doesn't work either


Sounds like a connector is disconnected inside the driver side door. The connector is usually located near the front of the door. Removing the door panel could be a job you do not want to attempt, but the car being a 2004 you may want to try. The wiring for the door windows and locks goes through this door.

Mar 11, 2015 | 2004 Chrysler Sebring

2 Answers

How do I fix the window switch for the front window on a 2004 chrysler Sebring Convertible


do not try to pry it off the door panel, it will break it as it is welded ( plastic) to the door panel. remove the entire door panel for testing. many times the wiring between the body and drivers door will break inside the rubber boot from bending back and forth when the door opens and closes. many times i have seen this cause window related problems

Nov 26, 2014 | 2004 Chrysler Sebring Convertible

1 Answer

Opening the drivers door doesnt automatically open the passangers door


Some vehicle locking systems allow a single button press to unlock the driver's side door and require a second button press to unlock the passenger side door. Likewise, use of the key to unlock the driver's side door does not automatically unlock the passenger side.

Mar 25, 2014 | Dodge Stratus Cars & Trucks

1 Answer

The inside door handle/ lever on the driver side of my 2004 Sebring will not release the door. The outside door lever works fine. 1) How do I remove the inside door panel? Thanks, Larry


See this link on the same site: http://www.fixya.com/cars/t5231823-remove_drivers_inside_panel_door
The answer isn't for door locks but the procedure for removal of the panel is the same. I just removed the panel on my 2004 convertible this afternoon and followed similar instructions.
DT

Aug 23, 2010 | 2004 Chrysler Sebring

1 Answer

2004 chrysler sebring driver window won't go down


you may find the problem is the cut out mechanism inside the door panel,this mechanism cuts the power from the window motor when the window reaches the bottom & when it reaches the top,it may need to be reset or it may be faulty & needs replacing......hope this helps....cheers

Aug 09, 2010 | 2004 Chrysler Sebring

1 Answer

Need to take child proof lock off rear door on passenger side of chrysler sebring 2004


its in the inside door frame when you open the back car you will see a small black switch that you can push up or down and it is usually labeled

Sep 15, 2009 | 2004 Chrysler Sebring

1 Answer

Door locks


Regarding the rear door child locks: There is a small lever on the latch side of the door, you can only see it with the door open. Move it to the other position.

Regarding the front door locks: You either have a bad door lock switch, or the power lock solenoids are beginning to fail. To check this, you will need to pull the door panels off, & measure the actual voltage at the solenoids whilst manipulating the lock switch. If you have 12 + VDC, I would suggest replacing the door lock solenoids. Not hard to change, but it IS time consuming. Best left to a dealer. Expect to pay 1 hour per side to change each solenoid.

Sep 28, 2008 | 2004 Toyota ECHO

3 Answers

Inside door handle 2004 sebring won't work


First off, you'll need to be able to remove the door panel. there are plastic clips (Push in body clips) as well as a couple of screws that hold the panel on. If you do not have power windows, you'll need a tool available from most any parts store to remove the window crank handle. You can get a window crank handle off with a couple of standard screwdrivers (There is a small metal clip that locks the handle on) but this normally results in damage to the panel. When the panel swings freely away from the bottom of the door, gently slide it directly up to remove it.

Once there, you should be able to clearly see the handle assembly, look for a metal rod about 1/4 inch in diameter that is supposed to be attached to the handle assembly via a little plastic clip. if either the clip or the handle assembly is broken, the rod will disconnect and you will be yanking on a handle attached to essentially nothing.

Door rod clips are available through most auto parts stores for $4-5, handle assembly's you can sometimes get through a wrecking yard, or order from the parts store.

Once you have the panel removed

Jun 19, 2008 | 2004 Chrysler Sebring

Not finding what you are looking for?
2004 Chrysler Sebring Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...