Question about 2002 GMC Envoy

Open Question

How to remove serpentine belt from 2002 gmc envoy

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 250 Answers

SOURCE: battery removal on a 2004 GMC Envoy

The battery is on the right side behind the fuse box. You need a metric set to undo the 3 screws. Theres one that attaches to the body, one to the bar that goes along the top, and theres one on the left side below the vacuum hose and air induction. After you've taken out those three, you should lift the whole thing out(battery and shroud) together. It's hard to take the shroud off before you lift the battery out. After that, you have to pry the shoud off the battery. The two terminals in the back make it hard. Then just go to any auto parts store and they'll give you a new one. 

Posted on Jan 28, 2009

Ad
  • 104 Answers

SOURCE: Need firing order diagram for 2002 gmc envoy

one, five, three, six, two, four

The plastic intake should have this sequence molded into it somewhere, and even the corresponding cylinder numbers in front of their respective holes. Have fun, and thanks for posting on Fixya.com

Posted on Mar 20, 2009

  • 116 Answers

SOURCE: How do I replace Serpentine belt on 92 gmc Sanoma.

should just have to turn the tensioner and pull belt off alternator pulley, release tensioner ,remove belt. install new belt, apply tension to tensioner and put belt back on alt. pulley.will require 1/2 in ratchet or serp. belt tool.

Posted on May 19, 2009

ddegroote
  • 35 Answers

SOURCE: need fuse box diagram 2002 gmc envoy

If I remember correctly if you look at the back side of the fuse cover, it should tell you what the fuses are. Also in the owners manual in the index, under fuses, it should give you a diagram of the fuse location for the acc. outlets. Good luck. The fuse should be a 20 or 25A fuse.

Posted on May 26, 2009

abauto
  • 353 Answers

SOURCE: 2002 gmc envoy shuts off when i turn on the ac whil ideling

If it does it when idling I would suspect an IAC motor (Idle Air Control). If it is opening too slowly the added air the motor needs will not be supplied fast enough and the engine will kill.

It could be other things also but this is where I would start.

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

With ac off. compressor clutch and pulley seize causing belt to smell on 2002 gmc envoy


-Replace new one or remove it and use shorter belt.


Good Luck


mai

Aug 28, 2014 | 2002 GMC Envoy

1 Answer

I changed the fan clutch and water pump and still a clicking noise, What can I do to find the problem?


Remove the serpentine belt and run the engine to see if the noise is coming from one of the belt driven devices.

Feb 16, 2014 | 2002 GMC Envoy

1 Answer

Removing a power steering pump on a gmc envoy


There are three bolts holding the pump in place, the third is accessed thru the pulley holes.

Sep 01, 2012 | 2003 GMC Envoy

1 Answer

How to install an alternator on 2005 Envoy


Remove serpentine belt. Remove mounting bolts. Remove electrical connectors. Remove alternator.
Revers for installation.

May 07, 2011 | 2005 GMC Envoy

1 Answer

What tools will I need to replace serpentine belt on 2007 v 8 gmc envoy denali?


Should be a square 3/8" hole in the tensioner. There you can insert a 3/8" extention, and connect a breaker bar. Turn it to take the pressure off the belt and remove.

Jan 25, 2011 | 2007 GMC Envoy Denali

1 Answer

Battery light on no power steering.


Broken belt. Alternator and power steering on the serpentine belt, Get a new one on there, you have about 15 miles before the battery dies. (In case you have to drive it) Hope this helps.

Aug 13, 2010 | 2002 GMC Envoy

1 Answer

How to install Serpentine Belt


Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2002 GMC Envoy. Plus Instructional and Directional Diagrams you will find very useful.

http://www.2carpros.com/car_repair_information/year/2002/make/gmc/model/envoy/2002_gmc_envoy_drive_belt_routing_diagram.htm

GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
A. Find the Tensioner(s). (See Diagrams on Link)
B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
C. Remove the loosened belt off one of the other more easily accessed Pulleys.
D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Mar 30, 2010 | 2002 GMC Envoy

1 Answer

How to replace the serpentine belt


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it either way.


Click on the following direct Link. It has several Diagrams for your Belts, based on your specific engine and options. These also include specific instructions on moving the Tensioner, in order for you to loosen and remove the Belt.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!


http://www.2carpros.com/car_repair_information/year/2002/make/gmc/model/envoy/2002_gmc_envoy_drive_belt_routing_diagram.htm

Feb 26, 2010 | 2002 GMC Envoy

1 Answer

How to change water pump on 2002 gmc envoy


First, copy this diagram down so you will have a guide to putting your serpentine belt back on when you need to...


019e024.jpg
Follow this link to a "how to" video on replacing your vehicle's water pump. It will take awhile to watch the video(s), but will be well worth it.

http://www.wonderhowto.com/how-to-replace-water-pump-vehicle-102464/

Feb 20, 2010 | 2002 GMC Envoy

1 Answer

Need to know how to change a drive belt.


need a serpentine belt diagram for 2002 GMC envoy

Jul 31, 2008 | 2002 GMC Envoy

Not finding what you are looking for?
2002 GMC Envoy Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...