Question about 1993 Honda Accord

1 Answer

ANTENNA MAST CHATTER UP AND DOWN ON MY '93 HONDA ACCORD EX. GEAR OR MAST OR BOTH

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 75,822 Answers

MOST LIKELY THE MAST IS THE PROBLEM, IF IT IS AVIL SEPERATELY REPLACE IT.

Posted on Sep 09, 2009

Testimonial: "THANKS, AT LEAST I CAN START ON IT"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Radio static


Check your antenna. If the mast is not extended, your reception will be limited. try an AM station, usually a local AM station will still come in even with the mast down. Have you tried playing a CD (if equipped) ? If that plays well, you've confirmed lack of reception as the problem. If the mast is extended and you still do not have reception, the antenna plug my have come out of the back of the radio. The requires removing the radio to check.

Sep 30, 2013 | 1997 Honda Accord

Tip

Fix A Honda Accord Antenna


Anyone that has owned an older Honda Accord (1990-1998 or so) has probably had a problem with their radio antenna. My problem was actually there when I bought the car. Whenever I would turn the car off the antenna would retract and when it was all the way in it would make this horrible grinding/clicking noise. Eventually it stopped working all together. As I was looking into this problem I found out that it was a very common problem, but one that had a very easy solution. I would say that almost anyone could preform this antenna fix. If you are having the same problems here is how to fix it:<br>
1) Get a replacement antenna mast. You can find them on Ebay for around $15.

2) Remove the old mast by taking off the chrome nut that hold the antenna onto your fender. You might need a small hammer and a punch to get it off. It should be fairly tight. <br>
3) Pull out the old mast. You have to give it a good tug as the end is in there tight. Check to see if it is all there. If some of it is still stuck in the antenna motor you might need to take it apart to get it all out.<br>
4) Turn the radio on then put the new mast into the hole for the antenna with the teeth facing the rear of the car. Push it as far as it will stopping when it won't go in anymore. You don't want to force it.<br>
5) Have a friend turn off the antenna while you guide the new mast in. If it doesn't go quite in all the way that is fine, it will eventually.<br>
6) Re-install the holding nut. <br>
That's all it takes. You can now enjoy your radio again!

on Sep 23, 2011 | Honda Accord Cars & Trucks

1 Answer

Replacing the Antenna Mast on a 95 Accord


you will probably hav eto remove the motor cover. there is a nylon strip with teeth on it that a gear pushes and pulls to raise and lower the antenna. you have to make sure that the strip is properly in the channel and meshing against the motor gear.

Apr 04, 2010 | 1995 Honda Accord

1 Answer

Honda Accord 99 EX Antenna Faulty?


Static won't come from an antenna. It normally comes from your connections. If you've been changing the head, check the contacts where it goes together. The only noise your antenna will pick up, is noise from your ignition. If what you hear is more of a buzzing or clicking that changes as you accelerate, then you should get your ignition checked.

Nov 20, 2009 | 1999 Honda Accord

1 Answer

Replace antenna


Remove old Antenna
  1. Activate the antenna switch to the up position.
  2. Using the wrench or needle-nose pliers, loosen and remove the original retaining nut on the base of the antenna mast.
  3. Gain access to the underside of the area of the trunk where the antenna is located.
  4. Remove the bracket or brace that is below the hole and holding the antenna in place.
  5. Remove the mast.
  6. Find the motor that controls the antenna mast. Generally, power antennas will have a constant 12-volt lead and a ground lead. The ground lead will be grounded to the panel next to the motor.
  7. Remove the ground lead from the panel.
  8. Pull out the antenna coaxial cable.
  9. Unplug the coaxial from the extension coaxial cable.
  10. Remove the original antenna coaxial cable. Note the route the cable follows.

Install new Antenna
  1. Inspect the fender area where the antenna mast will be mounted for rust.
  2. Clean the area before installing the new antenna.
  3. Plug the new antenna coaxial cable to the extension coaxial cable.
  4. Plug the new antenna's coaxial cable into the radio's chassis antenna jack if there is no extension coaxial cable. Tie or tape the string you put on the extension cable to the new antenna coaxial cable. This assures that the 2 cables stay together as you route them to the antenna mount in the fender.
  5. Connect the power lead of the antenna to the power antenna lead on the radio.
  6. Connect the 12-volt constant lead to the antenna to a 12-volt source or to the ignition switch.
  7. Direct the new antenna cable via the same route followed by the original antenna cable on up to the hole in the fender in which the mast will be mounted.
  8. Ground the ground lead from the motor to a clean metal surface on the metal panel near the mount.
  9. Insert the mast into the hole. Face the serrated side of the plastic cable on the bottom of the mast toward the motor side. The plastic cable can be inserted freely to about 12 inches and will stop.
  10. Turn on antenna switch to down position until the plastic cable goes down and catches into the gear mechanism of the drum housing. If the plastic cable does not gear into the mechanism, twist the cable slightly until the cable contacts into the gear mechanism while the motor is in operation.
  11. Stop the motor after the cable goes into the housing 12 to 25 inches.
  12. Secure the bracket or strap to the bottom of the antenna mast and to the metal fender.
  13. Replace the retainer nut to the base of the antenna mast and secure tightly.
  14. Replace the panel that covers the antenna mount area.

Oct 16, 2009 | 1996 Honda Accord

2 Answers

92 honda accord ex - No power on D4..


D4 is slipping and not engaging. This means you need a transmission. you're losing a gear

Jul 24, 2009 | 1992 Honda Accord

1 Answer

Antenna mast broken


    Give these instructions a shot. Might be too generic but might be enough to get you going. Removing Original Antenna
  1. Step 1 Activate the antenna switch to the up position.
  2. Step 2 Using the wrench or needle-nose pliers, loosen and remove the original retaining nut on the base of the antenna mast.
  3. Step 3 Gain access to the underside of the area where the antenna is located.
  4. Step 4 Remove the bracket or brace that is below the hole and holding the antenna in place.
  5. Step 5 Remove the mast.
  6. Step 6 Find the motor that controls the antenna mast. Generally, power antennas will have a constant 12-volt lead and a ground lead. The ground lead will be grounded to the panel next to the motor.
  7. Step 7 Remove the ground lead from the panel.
  8. Step 8 Pull out the antenna coaxial cable.
  9. Step 9 Unplug the coaxial from the extension coaxial cable.
  10. Step 10 Remove the original antenna coaxial cable. Note the route the cable follows.
    Installing the New Power Antenna
  11. Step 1 Inspect the fender area where the antenna mast will be mounted for rust.
  12. Step 2 Clean the area before installing the new antenna.
  13. Step 3 Plug the new antenna coaxial cable to the extension coaxial cable. (On some General Motors and Ford cars you may need an adapter to mate the 2 cables together. Car audio retail stores sell such an adapter.)
  14. Step 4 Plug the new antenna's coaxial cable into the radio's chassis antenna jack if there is no extension coaxial cable. Tie or tape the string you put on the extension cable to the new antenna coaxial cable. This assures that the 2 cables stay together as you route them to the antenna mount in the fender.
  15. Step 5 Connect the power lead of the antenna to the power antenna lead on the radio.
  16. Step 6 Connect the 12-volt constant lead to the antenna to a 12-volt source or to the ignition switch.
  17. Step 7 Direct the new antenna cable via the same route followed by the original antenna cable on up to the hole in the fender in which the mast will be mounted.
  18. Step 8 Ground the ground lead from the motor to a clean metal surface on the metal panel near the mount.
  19. Step 9 Insert the mast into the hole. Face the serrated side of the plastic cable on the bottom of the mast toward the motor side. The plastic cable can be inserted freely to about 12 inches and will stop.
  20. Step 10 Turn on antenna switch to down position until the plastic cable goes down and catches into the gear mechanism of the drum housing. If the plastic cable does not gear into the mechanism, twist the cable slightly until the cable contacts into the gear mechanism while the motor is in operation.
  21. Step 11 Stop the motor after the cable goes into the housing 12 to 25 inches.
  22. Step 12 Secure the bracket or strap to the bottom of the antenna mast and to the metal fender.
  23. Step 13 Replace the retainer nut to the base of the antenna mast and secure tightly.
  24. Step 14 Replace the panel that covers the antenna mount area.

May 13, 2009 | 1993 Chevrolet Corvette

1 Answer

Power antenna does not go all the way up, does not power retract


Does the motor continue to run even though the mast doesn't retract? Is there a loud 'click - click - click" as it tries to retract and extend or more of a chattering noise? Did you clean and lubricate the spool into which the toothed belt goes when the antenna retracts? Use an all weather grease (white lithium). Did you clean the teeth on the gear that drives the belt? There is a small metal guide where the belt meets the drive gear, sometime this wears and allows the belt to slip on the gear. Pull the giude straight out, then rotate it 180 degress and reinstall.

Jun 08, 2008 | 1993 Honda Accord

Not finding what you are looking for?
1993 Honda Accord Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...