Question about 2004 Honda Accord

1 Answer

2004 Honda Accord. The windshield wiper blades are banging hard on the bottom. I'm told the arms that goes between the motor and wiper needs replacing. Can I purchase the parts and make these repairs at home?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

There is a 10mm nut on the wiper where it connects to the post near the hood. Unscrew it and lift the arm off of the post. Turn it just a little up and put it back on the post. Screw the nut back on and it should work.

Posted on Sep 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windshield wipers bang when operating.


the arms are pressed onto the transmission linkage of the wiper motor. Most likely the nut can be loose holding the arm on and needs to be tighten up. I would loosen it first to be sure the threads are not stripped first before tightening up. If stripped it will need a replacement instead to prevent this noise

Nov 07, 2010 | 2000 Honda Accord

1 Answer

The windshield wipers bang


The grooves (or teeth) at the base of the arm could be stripped which is allowing the wiper arm to go past its normal stopping point and bang against something else. I learned this one the hard way.

Sep 27, 2010 | 2000 Honda Accord

1 Answer

My 2004 Accord wipers bang on the car during the down swing what could be causing this?


Either looseness of the linkage or install error. If Windshield has been replaced, sometimes they miss align the wiper arm.....

Sep 03, 2010 | Honda Accord Cars & Trucks

2 Answers

How do you remove and replace windshield wiper 2007 Honda Civic


the Windshield wiper blades have little clips that lock them in place. Most replacements have direction on how to release these, as they are common to all models, and remove and install the new ones. If you are talking about the Windshield wiper motor itself i recommend you get a Haynes repair manual on your vehicle so you have the step by step instruction on how to remove and replace this part.

Nov 22, 2009 | 2007 Honda Accord Sedan

1 Answer

How do I remove the windshield wiper motor from a Ford F-250?


2002 Ford F-250 Windshield Wiper Motor Removal & Installation 1. Turn the ignition switch to the ON position. Turn the ignition switch ON until the wiper blades are straight up, then turn the ignition switch OFF. 2. Disconnect the negative battery cable. 3. Remove the right-hand and left-hand windshield wiper arm and blade assemblies. 4. Remove the cowl top vent panels. 5. Detach the electrical hardness connector at the windshield wiper motor assembly. 6. Remove 3 wiper motor (module assembly) retaining bolts and remove the module assembly from the vehicle. 7. Remove the wiper linkage retaining bolt and remove the linkage from the wiper motor. 8. Remove 3 retaining nuts and remove the windshield wiper motor To install; 9. Place the windshield wiper motor in position and install 3 retaining nuts. Tighten to 10-12 ft. lbs. (12-17 Nm). 10. Connect the wiper linkage to the windshield wiper motor and install the retaining bolt. Tighten the bolts to 14 ft. lbs. (20 Nm). 11. Place the wiper motor (module assembly) in position and install 3 retaining bolts. Tighten the bolts to 6 ft. lbs. (9Nm). 12. Install the electrical hardness connector to the windshield wiper motor. 13. Connect the negative battery cable. 14. Allow the windshield wiper motor to cycle several times while checking for proper wiper motor operation. 15. Turn the windshield wiper motor to the OFF position to park the wiper motor in the park position. 16. Install the cowl top vent panels. 17. Install the wiper arm and blade assemblies. Install the retaining nuts and tighten to 22-29 ft. lbs. (30-40 Nm). 18. Connect the negative battery cable. 19. Check the windshield wiper motor for proper operation and the wiper arms for adjustment.

Nov 09, 2009 | 2002 Ford E250

1 Answer

1999 Honda accord windshield wipers slapping back and forth, how do I replace the linkage or wiper transmission? Thanks, sick of the noise


hey you can unbolt them indiviually and tighten them in any position..but to remove open hood see the plastic cover bottom of windshield remove it ...basic hand tools... but to mess with the motor and the moving arm underneath you may have to pull the dash its hard takes several housrs..

May 07, 2009 | 1996 Honda Accord

3 Answers

Wiper arm goes off of the windshield when it is raining


Sounds like you just nee to remove them and reinstall them in the correct position. Take them off, run the wipers for one cycle until they park. Install the arms so the blade is about an inch above the bottom of the windshield.

May 02, 2009 | 1995 Honda Accord

1 Answer

1997 honda accord windshield wiper repair


wiper blades won't move but i can hear the motor working

Dec 11, 2008 | 1997 Honda Accord

1 Answer

Windshield wipers on 1991 Honda Accord


hi from the uk to adjust n/side wiper arm ? if you look at where the wiper arm is fitted below screen you may have a cap/covering that conseals the nut that fastens the arm to the motor wiper spindle which has a milti spline for adjusting? remove nut and pull up the arm and reposition as to prevent hitting bottom of screen ?? however if your wiper arms are the type without this nut fastening ? then same principle as above for readjusting but you will have to raise the arm verticle and carefully prise the arm off spindle there is a tool for this job and makes it easier it is a wiper arm puller you may be able to borrow or purchase? they cost approx £11 in uk but can be used for multiple other jobs ? so try 1st method you may be lucky ? when you reposition arm tap it on firmly!when you are happy with position ? good luck !

Nov 08, 2008 | 1991 Honda Accord

2 Answers

Windshield Wiper Arm


Pull up on the wiper arm, you will see a tiny little blade on the side of the wiper arm where it goes over the post, take a little screwdriver and pry that out board, this will release the arm from the post, it will be tight, wiggle the arm and pull straight out away from the post.

Oct 19, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
2004 Honda Accord Logo

1,769 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...