Question about 2007 Mercedes-Benz ML320 CDI

4 Answers

How do I reset my ml320 stereo code

When I turn my car on, it shows wait. I was told to turn my keys to power only the radio and park my car in the garage and wait until resets. I waited until it resetted and typed in the 5 digit code, but after that it still reverts back to - - - - -. Do I enter the same 5 digit code again? I got the code from the mercedes dealership that fixed my car.

Posted by on

  • Anonymous Mar 23, 2014

    My Mercedes c 220 car stereo cassette classic ask me for code after I changed the battery can anyone help me with the five digit code?

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

What is radio code 4 a 2000 mecedes ml 320

Posted on Jan 21, 2010

  • Milton_stone Apr 20, 2012

    31261

  • Milton_stone Apr 20, 2012

    Well that was my code I don't know if they all have the same code.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a vauxhall corsa and the car code but radio wont accept and shows safe mode

Posted on Mar 12, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Maybe the radio has been replaced. If so, you need to take the head unit out and get the numbers off of that. Dealer should be able to pull the code from the unit numbers.

Posted on Oct 15, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercedes-Benz Master
  • 4,869 Answers

It looks as though you code is incorrect as your radio is not accepting the digits.

Either check with the Mercedes Dealer to make sure they have given you the correct code or post another question quoting the radio MAKE+MODEL plus the SERIAL NUMBER and you will be advised whether the code is available

Posted on Sep 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After replacing the battery on my Porsche Carrera 2000, I entered the wrong numbers a couple of times on the radio screen asking me to enter 4 digits and then the screen went on a WAIT signal. Now that I...


Yes - there is a solution here.

The problem here is that you must leave continuous power to the radio until the WAIT period is over. Any interruption to the power causes the countdown or wait period to start all over again. The secret is to ensure the key is turned in the ignition to accessories point I or the first point on the ignition that activates power to the radio.

If the key is not turned in the ignition as outlined, the radio will automatically shut off after one hour which is a power saving feature (which is great) but it also has a side effect in this case of shutting off the radio before the time limit has been reached!!

Obviously - as you must leave the key turned in the ignition during the wait period (which may be up to 4 hours) please ensure the vehicle is parked in a safe location and well away from any opportunistic thief.!!

Hope it helps or for anyone reading this in a similar situation - this information applies to many vehicles and radio types as many manufacturers have a similar security feature.


Additionally - for cheap code retrieval for Porsche and many other car radios please see this link.

Thanks for using FixYa.

Mar 18, 2011 | 2000 Porsche 911 Carrera

1 Answer

Hi, i need the code to reset my stereo for a mercedese ML320. the vin # is hjgab 54e8wa033151. i disconnected the radio and now it asking me for the code. where do i find the code?


you can go to a Mercedes dealership to have this done if you do not have the code or you can go to this website to get the code with instructions how to set the code in your radio
the cost of this is a fraction of what the dealership charges you

here is the website to get your code

http://www.radio-code.com/?gclid=CPfYltCvz6cCFYvsKgodpj64EA

Mar 15, 2011 | 2007 Mercedes-Benz ML320 CDI

1 Answer

I have done all that on the ML320, remove negative terminal, remove the fuse, the radio and still says wait...... HELP !!


you must wait at least 3 ours for rest it. can't do any thing if you put wrong code must be patient for next turn, is this information helped you?

Oct 28, 2010 | 2007 Mercedes-Benz ML320 CDI

2 Answers

How to reset servise mileage on 2000 ML 320


Turn key to position 2. press the button to show the service due light. release button. turn key off. press and hold the same button to view the service light, within 2 second turn key to position 2. wait up to 10 second and the light will reset to show new service. This may take a couple of trys (make sure the doors are shut).

Jul 09, 2009 | Mercedes-Benz ML320 Cars & Trucks

1 Answer

Resetting Radio with WAIT on an 01' Ml 320


hi,,you can not enter your code while wait is on,try to put your ignition on one position,wait maybe 3 to 6 hours to disappear the wait on display,then try to enter the code with guidance of manual,ty

Apr 03, 2009 | 2007 Mercedes-Benz ML320 CDI

3 Answers

Resetting Radio with WAIT on an 01' Ml 320


I've entered incorrect radio code and it is now stuck on WAIT. but i don`t have the code what can i do. pl. help me

Mar 01, 2009 | 2007 Mercedes-Benz ML320 CDI

1 Answer

I have entered incorrect radio code for my 01' ML320 Radio and it is know stuck in WAIT. How can I reset radio and re enter Correct code Thanks


leave the radio on for a few days, with the wait displaying, it will display CODE after a few days, 2 - 3 days, then enter the correct code , everytime u enter a wrong code the time increases.

Mar 01, 2009 | 2007 Mercedes-Benz ML320 CDI

Not finding what you are looking for?
2007 Mercedes-Benz ML320 CDI Logo

3,024 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...