Question about 2005 Jeep Wrangler

2 Answers

I have to locate where the blower fan resistor is located on a 05 jeep wrangler ?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 22,246 Answers

In the fan motor casing

Posted on Sep 09, 2009

Testimonial: "thanks it was inside and a little tough to find but your answer told me where to look and it solved the problem."

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,111 Answers

Sometimes they are behind an access panel in the glove box or under the hood

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Jeep Wrangler Sport - blower won't turn on. What is the problem?


Check the fuses or the blower resistor that should be located on the passengers side under the glove box near or on the fan housing.

Jun 07, 2011 | 2006 Jeep Wrangler

1 Answer

My 1998 Jeep Wrangler Heater Motor only has one speed High. Nothing on any of the lower ones, no matter on ac or heat. What could be the problem?


This is 100% the Blower (Fan) Motor Resistor located near the Blower Motor.
This is a very common problem with Chyrsler, Dodge, Jeep and Plymouth. The key symptom is the Fan only working on High.
This is very easy to access and replace.

Let me know if this helped....

May 13, 2010 | 1999 Jeep Wrangler

2 Answers

I have a 2006 erangler X And the heater fan control low speed does't work. I dont know where the resisters are. Need help!


They are near the blower motor as the air is used to cool the resister, usually on the bottom of the blower housing.

Mar 30, 2010 | 2006 Jeep Wrangler

2 Answers

I have a 1999 Jeep Wrangler and the heater fan stopped working for all the fan speeds. The fuses are fine. How do you know if it is the blower resistor or the blower motor?


If you bypass the resistor pack and connect the motor directly to the fused 12v supply then the fan should run at maximum speed. If so, it's the resistor pack that's blown: a very common fault on a huge number of makes and models.

Feb 13, 2010 | 1999 Jeep Wrangler

1 Answer

THE LAST 2 SPEEDS ON MY 2000 JEEP WRANGLER BLOWER FAN DOESNT WORK.


The blower resistor has failed. the resistor is located under the dashboard on under the glove box. below the blower to the lower left side you will see the resistor which is approx 3" in length x 3/4" . it will have atwo mounting hex screws holding it. tight conditions. unconfortable to reach. Rsistor can be purchased at auto parts store approx $25

Jan 22, 2010 | 2000 Jeep Wrangler

1 Answer

98 Jeep wrangler, fan/air won't cut off


Replace the blower motor resistor. You can unplug the fan till you get one. Usually located behind the glove box.

Jun 10, 2009 | 1998 Jeep Wrangler

1 Answer

Wrangler jeep heater/AC fan


Usually, when the fan works only on high speed the issue is with the blower motor resistor. It will be located under the dash close to the blower motor itself. It will have a multi-wire plug and feeds signal to the blower motor. An updated resistor maybe available in which case a slightly larger hole will have to be cut for the new resistor. This is not a difficult proceedure, only a couple of screws are holding the resistor in place and most resistors are resonably priced. I recommend you buy the resistor at the dealer, this is a case where you get what you pay for.
Good luck, hope this helps.

Jan 18, 2009 | 2003 Jeep Wrangler

1 Answer

Blower quit working


check fuse first, every jeep ive had had the same problem ,its the fan speed resistor,most are located on the heater core /fan housing.NAPA 25.00 PLUS SHIPPING.

Dec 13, 2008 | 2006 Jeep Wrangler

Not finding what you are looking for?
2005 Jeep Wrangler Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...