Question about 2007 Volkswagen EOS Convertible

1 Answer

My top opens to the up position, where the side rails remain closed but the top itself goes straight upin the air. I cannotr open it any further, though I can close it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 561 Answers

This maybe a fuse issue check your fuses im not sure if there is more than one fuse that controls the roof system if not it seems that the hydrolic pump that controls the stage two of opening is not operating. I would take this to a dealership for investigation.

Posted on Nov 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tailgate won't open on 2008 territory I can open the glass but there is no visible override for door and I can't see how to remove trim with door closed. Anyone know how to fix this please?


The top trim pops off. The bottom will pop off at the top of it only, may be a screw on each side to remove. The rest is guessing. Once the top of the bottom panel is loose, reach down and feel for the release for the latch. The latch usually goes left to right. Once open you can remove the remaining screws and replace the latch, if necessary.

May 24, 2016 | Cars & Trucks

2 Answers

Why do I not get diesel from the diesel pump to the rail


check for a blocked lift pump and hose pipe that supplies the fuel. or try pumping manually until you see dieslel coming out

Feb 29, 2016 | Cars & Trucks

2 Answers

Where is fuel injector located on the engine how is it removed and is it repairable using welding tip cleaning tool?


Make and model would help, the injector should be after the throttle body on the inlet. A welding tip will not even go close to repairing it.

Apr 28, 2015 | Cars & Trucks

1 Answer

Remove a hood from a 2006 nissan altima


absolutely not. first thing, carefully remove the washer hoses. there are four bolts on the hinges. just remove front two completely then slowly remove rear two while someone else holds the other side of hood. the hood itself is relatively light.when reinstalling, keep the hood bolts slightly loose and bring down the hood slowly, not letting it close. when you can position the hood straight, tighten a bolt on either side then close the hood. if it closes and opens while being evenly gapped on both sides tighten all four bolts. then replace the washer hose and done.

Nov 13, 2013 | Nissan Altima Cars & Trucks

1 Answer

Hood will not shut


If you mean the hood will not lock down in a closed position the following applies.
It can be due to a stuck hood release cable or latch pivot that is out of sequence. With the cable problem, the cable remains pulled back in an OPEN position and the latch pivot will remain in an unlock position under the hood. For the latch pivot, the pivot has a V notch and is suppose to lay in an open position in order for the hood striker to trip it into a locked position. You may not be lined up, basically the pivot is flipped into a closed position and the striker hits its' top instead of its' V slot.

Rust or a broken pivot return spring can be the causes for this defect.

If you mean the hood will not move down from an open position, then that is a different problem. The small lift cylinders on each side of the hood may be jammed. Or the hood hinge could be defective. Be careful, some hoods are made of aluminum and bend easily if forced.

Nov 06, 2013 | 2009 Mercury Mountaineer

1 Answer

The Convertible top of Mercedes-Benz 2005 CLK 320 won't open or close.


If the "black part" you are talking about is the "trunk partition"(which should come up as a "fault" on the dash when you try and cycle the top) then there are several things to check. The partition itself should snap into the retracted position(forward), and back. If it doesn't there are two struts(also called air springs) that have lost their charge and are not holding the partition in place. It has to be held solidly in place to set the switch on the left side(driver side) in order for the top to go down. If it's at all floppy, it won't set that switch and the top won't cycle. I've found the hard way this is a common problem.

Mar 18, 2013 | 2005 Mercedes-Benz CLK 320

2 Answers

03 Freelander sunroof wont close. One side looks like it is open tand the other side with the moving parts look closed. how do I fix this? Is there a way to take out the window?


Had a smiilar problem with my 2000 Freelander, the runners on the sunroof have plastice teeth which snap off, if you remove the plastic strips on the inside of the sunroof you can unscrew the glass take it out force the sunroof into the closed position and reattahch the sunroof, then never use it again

Jul 10, 2009 | 2003 Land Rover Freelander

1 Answer

How do i inside air filter for 2008 HHR


Open the glove box on the right side of the dash. There are tabs on each side that must be pushed inward to release the glove box, and let it open completely. You may need to remove all items from the glove box before doing this, as most stuff will fall out when you release the tabs, and let the glove box open fully.
You will then see three (3) tabs that hold the cabin filter compartment door closed. Release those tabs to expose the filter. The old filter will slide straight out. Do this slowly, as not to send dust and dirt flying all over the inside of the car. Note the direction of flow on the old filter before removing it. The filter will be marked, "AIR FLOW" and have an arrow indicating this.
Now, simply install the new filter, noting the direction of flow. Close the filter housing, snap the housing tabs closed, raise the glove box back into position slowly, re-installing the glove box tabs, and you're finished.
This procedure is also explained in your owners' manual, on page 3-22, under Passenger Compartment Air Filter.

Apr 21, 2009 | Chevrolet HHR Cars & Trucks

4 Answers

1998 Honda Accord Sunroof wont close all the way


I took mine in expecting to have it repaired and it turns out that it was just the screws along the left and right-hand side of the panel.  They were loose.  The guy told me that "it eventually happens" and that "it's only a matter of time".  He went on to say that "it shouldn't happen again".  So, check the screws on either side of the panel right where it's stopping.  I suspect that this is prohibiting yours from closing as well.

HTH!

Feb 24, 2009 | 1998 Honda Accord

Not finding what you are looking for?
2007 Volkswagen EOS Convertible Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...