Question about 2002 Ford Taurus

1 Answer

Ford monde 52 plate,RH front indicator not flashing,changed bulb and checked fuse,earth wire seems to be attached to body behind H/light unit also

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,201 Answers

Try changing the flasher, usually in the fuse block under dash, it's round in shape. If you can't find it, put the left turn signal on, and listen for the clicking, that should lead you to it. When you find it, put your finger on it cause the hazard flasher is the same shape, when you feel a little vibration, you have the right one. If it still doesn't flash, it might be the turn signal switch in the steering column

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

L/h/r indicator not working on 59 plate Peugeot partner van.


The rapid blink indicates the system has lowered resistance because a bulb circuit is open.

Jun 21, 2016 | Peugeot Cars & Trucks

6 Answers

Why would my 2002 Dodge Durango passenger side tail lights work but the brake and blinker do not? Bulbs are the same and it has a single fuse. All are good. What would keep the blinker or brake light...


I had a similar problem, you might want to try changing out the BWD - Relay - Multi-Use Part #R4823. It is located under the Dash, beside the Steering Column. I purchased one from Canadian Tire for $25.00 b71e50cc-8a90-4fe6-8fc0-e129852746b5.jpg

Apr 24, 2014 | 2002 Dodge Durango

1 Answer

My front and rere lights on my 2006 ford galaxy have stopped working also the wipers have stopped working .fuses are all ok.your help please .thanks willie


for the front and rear lights to stop working together along with the wiper motor indicates a faulty earth connection between the body and the chassis Check and clean all earth wires between the engine ,body and chassis panels

Jan 05, 2013 | 2004 Ford GT

1 Answer

2000 excursion turn signal operates normally until you step on brake then all flash fast and weak. running board ligts also flash with turn signal. 4 way flasher lights also fast and weak.


The earth connection to the light units is poor, probably due to a corroded screw on an earth wire between the light unit and the vehicle chassis or even a corroded nut and washer, holding the light unit onto the chassis. When this happens, the bulbs being illuminated try to draw their earth connection through the other bulbs in the unit, causing them to illuminate as power is drawn through them.

Remove the nuts that hold the light unit to the chassis and use a wire brush to clean the nuts, screws and area of the chassis where they touch and reassemble. This should cure your problem. In the event that this doesn't work, find a place on the chassis nearby where you can attach a new well connected earth wire and then attach the other end to the metal body of the light unit. You MAY have to find where the earth for the light unit is currently placed and connect directly to that depending on how the particular light unit is connected and wired.

Aug 23, 2011 | 2002 Ford Excursion

1 Answer

Have got Ford Trailer Harness Converter wiring set 7T4Z-15A416-B On the box, is a link to get PDF installation instructions at INFORD.COM Unfortunately, I cannot get this PDF Instructions as the site...


I know this post is old but in the interests of helping others ....


I installed the 7T4Z-15A416-B on a 2011 Ford Flex that has LED lights as standard.

I mounted the box on the LH side, inside the rear bumper. Since the box is outside the car, I gooped up the box with 'liquid tape' to seal the wire exits from the plastic casing.

The 4 color ribbon cable goes to the receiver area. I threaded mine through the hitch itself and used cable ties to limit vibration/abrasion.

I spliced the signal cables for LH turn indicator and tail/stop lights into the LH light wiring harness behind the rear lights.

The RH turn indicator has a longer wire which I threaded through the hitch and spliced it into the RH light cluster harness behind the RH light.

I connected the red +ve wire to the 12V feed to the 20A accessory socket in the rear cargo area. I put a small **** in a blanking grommet to bring the wire inside the vehicle.

The earth required drilling a hole into the body behind the LH light. i coated this also with 'liquid tape' for corrosion protection.

The Stop cable (which puzzled me for the longest time) went unused so covered it with insulating tape.

The harness works perfectly. The only caveat is the accessory outlet has to be powered up i.e. the ignition on.

Nov 11, 2010 | 2009 Ford Flex

2 Answers

Ford transit 2005 rear lights not working bulbs and fuses in main box all seem in order . thanks mark


Hi Mark

Check the earth wire to the van body from thr rear lights to the body and from the main battery to the body. is the battery under the drivers seat? if so ensure the connections are good and no loose wires.

Fords have a major problem with earth wires so check as many as you can.

If still no joy get back to me.

Regards

Dan

Feb 01, 2010 | 2003 Ford Escort

1 Answer

Indicators on my Subaru flash fast when I apply the brakes


earth wire ,also fit another earth wire from light cluster to car body and tuck wire under the multi block connector on the earth connection

Dec 07, 2009 | 1998 Subaru Legacy

1 Answer

License plate light wires


Well if you can see that you have 2 black wires on No plate light and you can see the rear lights then get a test light and turn on the parking lights with test lighttest light to earth and the point stick into wires on rear light till it lights then run wire from there to No plate...1 wire will go to light and 1 to Earth put earth to earth screw and other to No plate lisht good

Sep 23, 2009 | 1996 Chevrolet Blazer

3 Answers

FAILED FRONT RH INDICATOR


Simple, it just means that one of the right hand flasher bulbs, either back center or front, is burnt out. If all the bulbs are ok, there is probably still one not flashig because of faulty wiring or something in the same line like a switch malfunction or in newer technology, onboard computer malfunction. Being a jaguar, if the bulbs are all OK and you still got a problem, i'd suggest having it checked by the dealer.

Jul 07, 2009 | 2000 Jaguar S-Type

Not finding what you are looking for?
2002 Ford Taurus Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...