Question about 1994 Toyota Previa

1 Answer

I would to know the cylinderhead torque for a 3c 2.2 diesel

I would to know the cylinderhead torque for a 3c diesel of a Estima Lucida 2.2 in lbs ft.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

1st 48ft-lbf

2nd turn 90 degrees

3rd turn 90 degrees

Posted on Sep 10, 2009

Testimonial: "Hi, that was very helpful, I appreciate it very much. Thank you. Even thou I didn't get the sequence and stages of the torque"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque settings on a yaris 1.3 16v big ends,mains,flywheel,cylinderhead


Toyota Yaris Main and Big end Torque settings:
Tighten the main and big end bolts in sequential order and in two steps.
Main bearings. Stage 1.
22 ft lbs.
Stage 2.
44 ft lbs

Big end bearings.
Stage 1.
11 ft lbs.
Then Rotate bolt head a further by 90 degrees

Head bolt torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Flywheel spec:
65 ft lbs

Jul 15, 2016 | 2007 Toyota Yaris

1 Answer

REPLACING CYLINDERHEAD-TORQU SPEXS NEEDED


For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts
Start from center bolts and tighten in a clockwise rotation working out
Step 1 all bolts 22 Nm or 16 ft lb
Step 2 all bolts 44 Nm or 32 ft lb
Step 3 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Step 4 all bolts 45 degrees additional clockwise rotation using an angle indicator.

Hexagon Head Bearing Cap Sub-Assembly Bolts
1ZZ-FE Engine 18.5 Nm (14 ft.lb)
2ZZ-GE Engine 18 Nm (13 ft.lb)

Connecting rod:
1. Apply a light coat of engine oil on the threads and under the heads of theconnecting rod cap bolts.
2. Install and alternately tighten the 2 connecting rod cap bolts in several passes. Torque: 1ZZ-FE: 20 Nm (204 kgf-cm, 15 ft. lbs.) 2ZZ-GE: 30 Nm (306 kgf-cm, 22 ft. lbs.) If any of the connecting rod cap bolts does not meet the torque specification, replace the connecting rod cap bolts.
3. Retighten the cap bolts by 90 more
4. Check that the crankshaft turns smoothly.

Sep 11, 2012 | Cars & Trucks

1 Answer

I need the timen mark to toyota lucida 92 engine 3c whit turbo to put timen belt on


hey i have timing marks for 3ct 93 estima if you want them ill have to email you can email me at k.a.o.shea@hotmail.com there to big to upload on this site.

May 11, 2011 | 1992 Toyota Previa

1 Answer

I need the cylinderhead torque settings for 2004 1.3 city golf. Please assist


The head torque settings are 75 nm plus a further 90 degrees (102 ft/lbs)

The torquing sequence is:-

9 5 1 3 7
front
10 6 2 4 8

Mar 17, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

Reduced torque and high temperature on toyota lucida 2.2 ltr. 3C diesel during steep grade. Problem also show if the vehicle is heavily loaded


yeap we have this problem, we had the radiator flushed and it fully serviced.problem came back.no visible water leak under pressure test by mechanic.ours turned out to be the head gasket.not good.new engine .not worth trouble

Jan 31, 2011 | Toyota Previa Cars & Trucks

1 Answer

Need cylinderhead torque specification for03chry.t&c van 3.8


Cylinder Head Torque Step Min. Max. Note(s) 1 45 (ft. lbs.) 45 (ft. lbs.) - 2 65 (ft. lbs.) 65 (ft. lbs.) - 3 65 (ft. lbs.) 65 (ft. lbs.) - 4 *90 (degrees) *90 (degrees) 429 Note *: Value is given in degrees. Turn the fastener this additional amount past the previous step.
Note 429: Torque should be above 90 ft/-LBS or replace bolt.

Sep 04, 2009 | 2002 Chrysler Town & Country

1 Answer

Cylinder head torque spec lucida estima 2.2


help cant get a manual for our car, change head but unable to find the torque setting for it, its a toyota lucida estima 2.2 thanks

Aug 30, 2009 | 1997 Toyota Previa

1 Answer

Estima lucida 94 auto diesel needs jump leads every time


put a 12 volt test meter on the battery with the engine off and get the reading.
then start the engine and retest the volts it should go up a volt ot two.
if the test readings are the same then the alternator is bad.
thank you
jm

Jul 29, 2009 | 1994 Toyota Previa

2 Answers

Engine oil capacity


it's a 4 liter oil

May 14, 2009 | 1995 Toyota Previa

2 Answers

Lucida estima


a lucida estima is a seven seater toyota passenger vechile

Aug 22, 2008 | 1994 Toyota Previa

Not finding what you are looking for?
1994 Toyota Previa Logo

Related Topics:

493 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...