Question about Ford Ranger

1 Answer

I have the wrong rear end gears in my 94 ford ranger xl 3.0 4x4 5- speed what gears do I need to make the 4x4 work?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 2,050 Answers

You need to know what the fronts are. Were the rear gears changed?

Posted on Sep 09, 2009

  • Douglas Hansen
    Douglas Hansen Sep 09, 2009

    also... you can determine your gear ratio, but you'll need to know how many teeth on the ring gear and the pinion gear.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of the park gear in a 94 Ford Ranger


Get that from ATSG.Com or local
trans parts supplier, that the shops buy from

Jun 21, 2012 | 1994 Ford Ranger Supercab

1 Answer

I need to know how to get the hex nut out of my 1993 ford Ranger pickup-rear end ??


Caution!!! Removing the driveshaft yoke retaining nut could cause misalignment of the ring and pinion gears and lead to more serious problems. If you are wanting to access the pinion bearing because your 8.8 rear end has started making noise then you really need to disassemble the unit as a whole. A job left in most cases to an expert.

Apr 10, 2011 | 1993 Ford Ranger SuperCab

1 Answer

I have a 94 Ford Ranger with a 4.0 engine and a 5 speed trans. The truck has been sitting for a while and now when I drive it the shifting is hard going into 2nd and 3rd. It shifts fine when sitting...


the shift sinkcranizers are dry .may have to pull the shifter and use some white lithum grease on it work the shifter from gear to gear working in the grease drive the truck for about 25-30 miles and change trans fluid

Feb 03, 2011 | 1994 Ford Ranger Supercab

1 Answer

I have a 1996 ford ranger and the speedometer is not working. i have changed the speed senor on the transmission but it still does not work. need a little help please any idea's ?


I HAVE 1985 RANGER WITH SAME PROBLEM EXCPET MINE DIDN;T HAVE THE SPEED SENSOR THERE IS A LITTLE PLASTIC GEAR THAT GOES ON THE TRANSMITOIN SIDE OF THE SPEED SENSOR THE CABLE HAS A SQUARE END IF THE SENSOR BINDS THE GEAR WILL CRACK IT OLNY COST LIKE 2 DOLLARS BUT NOTE THE COLOR AND COUNT THE NUMBER OF TEETH OR YOUR SPEED-O WILL BE INACCURATE

Oct 10, 2010 | Ford Ranger Cars & Trucks

1 Answer

Speedometer, Odometer Out, Cruise problem '94 Ford F550 Super D.


if the vehicle speed sensor in the rear end is the same as the lighter duty f series they are very vulnerable, they run right above the large gear in the main drive of the rear end gaging the speed off this gear any metal chip or anything foating in the rear end can get grabbed by this gear and hit the sensor then it is ruined very common in fords. your can check the part at autozone or similiar store for lighter duty trucks it is 19$ and very easy to get to right on top of the rear end. If this is the problem id have the gear oil changed and check for debris in rear end to keep this from happening again. good luck

Apr 05, 2010 | Ford Super Duty Cars & Trucks

1 Answer

My 95 3.0 auto ranger has balls, but my 94 manual 3.0 ranger does not. whats the deal?


gear, rear end gear, 95 may have trans built for fast, 94 could be for towing

Mar 06, 2010 | 1994 Ford Ranger Supercab

2 Answers

89 ranger transmission


The trans gearing is all the same, the rear end gear set is where final drive ratio is determined

Sep 18, 2008 | 1989 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...