Question about 1990 Toyota Corolla

2 Answers

What is the timming setting for toyota carolla 1990. Engine: 4a-f. Is it 10degrees before or after?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toyota Master
  • 1,348 Answers

It has to fire before tdc.

Posted on Sep 09, 2009

Testimonial: "Thank you very much.I appreciate the solution you gave."

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

Before TDC. It seems strange but that's what it is.

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I need a vacuum diagram for a Toyota Carina ll engine 4A-F made in 1990 in Japan for the U.k market..kind Reg no G967WBA a.


Sorry we do not have that diagram. It should have the federal emission sticker under the hood, it has the vacuum diagram on it.

Apr 21, 2016 | Toyota Cars & Trucks

1 Answer

Does any one know how many valves a 1986-1987 toyota carolla 1.6 has, I think it is 12 or 8


Hi there:
Keep in mind this information:

Japanese market engines:
* 3A-U 1.5 L (1490 cc) I4, 8-valve SOHC, carb, 83 hp (62 kW)
* 3A-LU 1.5 L (1490 cc) I4, 8-valve SOHC, carb, transverse mount, 83 hp (62 kW)
* 4A-GEU 1.6 L I4, 16-valve DOHC, EFI, 130 hp (97 kW)
* 2E 1.3 liter
* 5A-F 1.5 liter
* 5A-FHE 1.5 liter
* 4A-FE 1.6 liter
* 4A-GE 1.6 liter
* 4A-GZE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, wide valve angle, supercharger, 165 hp (121 kW) GT-Z
* 2E 1.3 L (1295 cc) I4 cylinder 12v SOHC 73 PS (54 kW; 72 hp)
* 4E-FE 1.3 L (1331 cc) I4 cylinder 16v DOHC 100 PS (74 kW; 99 hp)
* 5E-FE 1.5 L (1497 cc) I4 cylinder 16v DOHC 105 PS (77 kW; 104 hp)
* 5A-FE 1.5 L (1498 cc) I4 cylinder 16v DOHC 105 PS (77 kW; 104 hp)
* 4A-FE 1.6 L (1587 cc) I4 cylinder 16v DOHC 115 PS (85 kW; 113 hp)
* 4A-GE 1.6 L (1587 cc) I4 cylinder 20v DOHC VVT 160 PS (118 kW; 158 hp)
* 4A-GZE 1.6 L (1587 cc) I4 cylinder 16v DOHC supercharged 170 PS (125 kW; 168 hp)

North American market engines:
* 4A-C 1.6 L I4, 8-valve SOHC, carb, 90 hp (67 kW)
* 4A-GE 1.6 L I4, 16-valve DOHC, EFI, 112 hp (86 kW)
* 4A-F 1.6 L (1587 cc) I4, 16-valve DOHC, carb, narrow valve angle, 95 hp (71 kW)
* 4A-FE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, narrow valve angle, 102 hp (76 kW)
* 4A-GE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, wide valve angle, 115 hp (86 kW) 1988/89, 135 hp (100 kW) 1990/91 GT-S
* 4A-FE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, narrow valve angle, 105 hp (78 kW) 93-94 SD
* 4A-FE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, narrow valve angle, 100 hp (75 kW) 95-97 SD
* 7A-FE 1.8 L (1762 cc) I4, 16-valve DOHC, FI, narrow valve angle, 115 hp (86 kW) 93-94 DX and LE
* 7A-FE 1.8 L (1762 cc) I4, 16-valve DOHC, FI, narrow valve angle, 105 hp (78 kW) 95-97 DX, and LE





Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 18, 2012 | Toyota Corolla Cars & Trucks

1 Answer

Replacing oil pan in 1990 Toyota Corolla


Vehicles covered: Toyota Corolla, 4A-F, 4A-FE, and 4A-GE Engines

Here's your maintenance manual entry for the complete procedure:

OIL PAN REMOVAL & INSTALLATION - 1990 Toyota Corolla

4A-F, 4A-FE and 4A-GE Engines

See Figures 1 through 7

1. Disconnect the negative battery cable.

2. Raise and safely support the vehicle.


2_19_2012_5_49_50_am.jpg


Fig. 1: Exploded view of the oil pan assembly-4A-F and 4A-GE engines

3. Drain the engine oil into a suitable container.


2_19_2012_5_50_48_am.jpg


Fig. 2: Remove the oil pan drain plug to drain the engine oil from the crankcase

4. Place a jack under the transaxle to support it.

5. Remove the splash shield from under the engine.

6. Raise the jack under the transaxle slightly.

7. Remove the front exhaust pipe between the exhaust manifold and catalytic converter. Some models have an oxygen sensor, disconnect the oxygen sensor wiring.


2_19_2012_5_52_25_am.jpg


Fig. 3: Remove the front exhaust pipe for better access during oil pan removal

8. On the 4A-F and 4A-FE engines, remove the center mounting.



2_19_2012_5_53_31_am.jpg


Fig. 4: Remove the bolts and nuts retaining the center mounting-4A-F engine

9. Some 4A-FE engines and all 4A-GE engines are equipped with a stiffener plate. Remove the set bolts and pull the stiffener plate from the vehicle.

10. On the 4A-GE engines, unbolt and lower the flywheel housing under cover.

11. If equipped, remove the oil cooler hose and union from the oil pan. Remove the two nuts and nineteen bolts retaining the oil pan.

12. Insert a blade between the pan and cylinder block, cut off the applied sealer and remove the pan.




2_19_2012_5_54_52_am.jpg


Fig. 5: Insert a blade and tap lightly to loosen the oil pan free from the block

To install:

Note: Be careful not to drop any oil on the contact surfaces of the pan and block.

13. Using a razor blade and gasket scraper, remove all traces of packing (FIPG) material from the gasket surfaces. Thoroughly clean all main surfaces to remove loose material. Clean both sealing surfaces with non-residue solvent.


2_19_2012_5_58_22_am.jpg


Fig. 6: Apply a reasonable amount of sealant (FIPG) to the oil pan surface-except 7A-FE engine

14. Apply new packing (FIPG) 08826-00080 to the oil pan as shown. Avoid applying excessive amounts to the surface. Be especially careful around the oil passages.

Note: Parts must be assembled within 3 mins of application. Otherwise, the sealer (FIPG) must be removed and reapplied.

15. Install the oil pan over the studs on the block with the nineteen bolts and two nuts. Tighten the bolts to 43 inch lbs. (5 Nm). Make sure when you install the oil pan drain plug using a new gasket.



2_19_2012_5_59_41_am.jpg


Fig. 7: Tighten the 19 oil pan retaining bolts securely-4A-F, 4A-FE and 4A-GE engines

16. If equipped, install the oil cooler pipe, two new gaskets and union bolt. Tighten the union bolt to 18 ft. lbs. (25 Nm).

17. Install the front exhaust pipe (with new gaskets on either end of the pipe) to the manifold.

18. On the 4A-GE engines, install and secure the flywheel housing under cover if removed.

19. On the 4A-FE engines if removed, attach the stiffener plate. tighten the No. 1 bolt first then the 5 bolts in the sequence shown. Tighten to 17 ft. lbs. (23 Nm).

20. On the 4A-GE engines, attach the stiffener plate with the 3 set bolts and tighten them to 27 ft. lbs. (37 Nm).

21. Attach the center mounting and tighten the member side bolts to 38 ft. lbs. (52 Nm), plate side to 17 ft. lbs. (23 Nm).

22. Lower the jack from the transaxle.

23. Lower the vehicle, and fill the crankcase with the appropriate amount of engine oil. Engine oil crankcase capacity is 3.4 quarts (with oil filter change).
Above -9 degrees Fahrenheit, use 10W-40 motor oil, and above 10 degrees Fahrenheit, use 20W-50 motor oil.

24. Connect the negative battery cable, start the engine and check for leaks. If all is well, raise the vehicle slightly and install the engine splash cover.

25. Recheck the engine oil level, top off if necessary.

Feb 14, 2012 | 1990 Toyota Corolla

1 Answer

Petrol fumes &smoke out of exhaust of 1990 carolla sprinter 1.6 - carb replaced and engine overhaulded what is problem


must be card problem.
maybe flooding due to stuck float valve
maybe over sized jets or diaphragm cracks.

Jul 07, 2011 | 1990 Toyota Corolla

2 Answers

I am trying to locate the fuel pump in the 1990 Toyota Corolla with a 4A-F3 engine and I can't find it. I've looked under the back seat and in the trunk. Do you know where it is? I do not have the...


remove the bottom of rear seat. open the service door on rear floor. take out the bolts that hold fuel tank set plate to the fuel tank, then now you can remove fuel pump assembly.

Sep 24, 2010 | 1990 Toyota Corolla

1 Answer

Set the timming from a motor 4af toyota corolla


Click on the following direct, free Link. It has the Timing Belt + Mark Diagrams for your 1991 Toyota Corolla 1.6L DOHC In-Line 4-Cylinder (4A-FE) Engine. Is also has additional - very helpful Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1991/make/toyota/model/corolla/1991_toyota_corolla_timing_belt_diagram_marks.htm

Apr 11, 2010 | 1991 Toyota Corolla

1 Answer

Problem in my toyota carolla 2001 model


You need to bring it in for sevice to find out what the engine codes that triggered the light are.

Feb 23, 2010 | 2001 Toyota Corolla

1 Answer

Where is the power steering reservoir located on the 1990 Toyota Carolla?


Make sure that your vehicle is parked on a level surface and the engine is cool before you check fluid levels. Power steering fluid and other fluids read at different levels when warm instead of cool. Locate the power steering fluid reservoir. It is located under the hood of your Toyota Corolla on the passenger side next to the engine. The reservoir is connected to the power steering pump. Remove the cap and use the dipstick to check the fluid level. For the most accurate reading, clean off the dipstick with a rag first, then re-insert and remove for the fresh reading. Add automatic transmission fluid or power steering fluid approved for use in Toyota vehicles if the fluid is below the low level mark. Add fluid gradually to keep for over filling the reservoir.
this will help.thanks.

Feb 20, 2010 | 1990 Toyota Corolla

Not finding what you are looking for?
1990 Toyota Corolla Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8729 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...