Question about 2000 Ford Expedition

2 Answers

2001 ford expedition only blows hot air and when fan is off it keeps drivers feet hot

Posted by on

  • yadayada
    yadayada May 11, 2010

    is the AC compressor running when u select AC?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

There is a blend door that is inside the heater box under dash these commonly break in the ford trucks and expeditions, it leaves the heat blowing thru even when it is on cold ac, i just had to fix mine.. by rplacing the blend door.. research ford expedition blend door on line there is a easy fix...

Posted on Sep 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 298 Answers

Hi under the hood the hoses going into the fire wall from the engine on one of the hose you have a valve which is open and close by a solenoid when it's defective it stays open check and close the valve

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix a heater that is blowing cold air on a ford expedition 2002


If the engine is reaching normal temp, and both heater hoses are hot, you may have a problem with a blend door under the dash.

Feb 10, 2013 | 2001 Ford Expedition

1 Answer

I have a 2001 expedition and the front vents blow hot air with ac on.back vents blow cold so i know its charged and compressor works.what can it be?


Check the blend doors found deep in the air duct underneath the dashboard. There may be loose linkages or the motor may not be working.

Aug 14, 2011 | 2001 Ford Expedition

1 Answer

IN our 2001 expedition the rear heater is blowing cold air but the front is hot. Is there a switch or valve for the rear that could be causing this? if so, where?


there"s no switch, but there is a blend door motor that is known for problems that controls the amount of cold or hot air output from the rear heater ac unit. repairing requires removal of the left rear inner body trim panel trim for access . let me know if you have any other questions.Thanks for using fixya

Jan 05, 2011 | 2001 Ford Expedition

1 Answer

My Air Condition is only blowing hot air in the front, but cold in the rear. Could anyone give me a start in correcting this problem? Thanks


possible blend door actuator faulty, or a faulty blend door. This door switches from hot to cold vents. On expeditions equipped with rear AC front and rear AC have seperate actuators. Hopefully this helps!!

Mar 31, 2010 | 2001 Ford Expedition

1 Answer

2001 Ford Mustang Cobra air conditioning problem


most fords were built to whenever the air is on to blow air onto the windows as well. most people dont notice it cause its only a partial air. if it is blowing out pretty hard then the most likely cause of that is that the little flap in your air ducting is stuck or the return spring on it has gone bad. hope i helped, good luck with the fix.

Nov 07, 2009 | 2001 Ford Mustang

3 Answers

2004 Ford Expedition XLT, front blend door actuator


Hope I was avle to help, glad you up and going.

May 26, 2009 | 2004 Ford Expedition

3 Answers

My heat in my truck doesnt work


the blendoor on the heater box maybe broken ck lines going to heater core and make sure they are hot. does the heat temp change at all from cold to hot?

Dec 05, 2008 | 2001 Ford Expedition

1 Answer

2001 FORD EXPEDITION


your controls have problems. the heat is there it is just not getting out because your control lines are not setting the vent controls into the proper positions. i had a chev van that lost some of the foam in side there and it blocked the whole front off. i had to rip it all apart to get at it

Oct 23, 2008 | 2001 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...