Question about 1994 Ford Ranger Supercab

2 Answers

POWER WINDOW IS GETTING JUICE BUT WINDOW IS NOW NOT COMING UP UNLESS MOTOR COOLS DOWN. I ASSUME THIS IS A MOTOR ISSUE. CAN THIS BE CLEANED TO PERFORM PROPERLY? WHERE CAN I FIND A SCHEMATIC TO REMOVE AND INSTALL A NEW WINDOW MOTOR? cause i know it's abitch! TRUCK IS 94 MAZDA TRUCK. THANKS

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 246 Answers

You dont mention what model your truck is but here is the directions for a navajo.

  1. Remove the door trim panel. If equipped with power windows, disconnect the wire from the regulator
  2. Support the glass in the full UP position or remove completely.
  3. Remove the window guide and glass bracket if equipped.
  4. Remove the center pins from the regulator attaching rivets.
  5. Drill out the regulator attaching rivets using a 1 / 4 in. (6mm) drill bit.
  6. Disengage the regulator arm from the glass bracket and remove the regulator.
  7. Installation is the reverse of removal. 1 / 4 in.-20 x 1 / 2 in. bolts and nuts may be used in place of the rivets to attach the regulator.
POWER WINDOW IS GETTING JUICE BUT WINDOW IS NOW - 64fb4db.gif

if this is not your model please especify

Posted on Sep 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

Window mtrs are fairly cheap - aprox $40-$50 for most common aplications. While at the parts store get a repair manual at the same time. This is not nearlly as hard to repair as one might think.

Posted on Sep 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 86 fiero headlight motors are fine the relays are good the fusable link is good the grounds are good but my lights won't come up the passenger one come up sometimes or half way and/or not at all and...


You've more or less covered everything but the problem exists.
Have you checked the motors to see if they are getting power from the relays ? If the motors have power and ground they should move unless something is restricting movement.

Aug 06, 2013 | Pontiac Fiero Cars & Trucks

2 Answers

The front windows on my 2003 Buick Rendezvous are inoperable. The windows work occassionally but once let down the windows won't go back up when using driver or passenger switch. Which fuse controls the...


Hi
it happen with me also actually the problem is the power window get jammed from the inner part..... you if you able to open it just open now clean it well then spray the lube into it and for a long time it work properly..... thankyou
front-windows-2003-buick-rendezvous-jserdy1edku5qfscwskpevsm-4-0.jpg

front-windows-2003-buick-rendezvous-jserdy1edku5qfscwskpevsm-4-2.jpg

front-windows-2003-buick-rendezvous-jserdy1edku5qfscwskpevsm-4-5.jpg

Dec 11, 2010 | 2003 Buick Rendezvous

3 Answers

2004 Pontiac Sunfire Power Windows Do Not Work Properly


Same problem. I had the driver window go first and then the passenger. You must replace the motors. Moisture has gotten into the motor and rusted parts of it. New motor cost be $55. It took two people (myself and a friend) a good 8 hours to extract old motor and install the new one.

Apr 14, 2010 | 2004 Pontiac Sunfire

1 Answer

Power window not functioning on F-250 Super cab Year 1989


check it with a test light one side should supply power down and the other for up. if you have power for up and down then youll need a motor

Sep 07, 2009 | 1989 Ford F 250

3 Answers

Honda accord 2006 only driver window works the other three will not...power is going to them but there is a grounding issue cause when i press the window buttons to work them you hear a short ticking or...


It may be old parts. They get sticky and rusty sitting there and one day usually the windows go down and not up again. Sometimes if all break at once like 3 at once, like in the same day or so, I would say something else is wrong, but you have a 2006.... I have a 2005 with 130K miles from brand new and have to replace all my switches and arms. I do live at the ocean and this all broke there. faster in the rust issues here, just like bicycles in the outdoor carports do here also, unless you bring them inside. Power windows are tricky because the electrical has to be so perfect, and the relay switches seem to be a major short life span issue, and the arms and motor move a heavy load and everything has to be greased well enough for all those years. Without enough juice and well greased components, due to bad electrical connection and age, everything goes sticky, stuck, click, gone. Lot's of people just replace the switches first and the windows work, but these switches are carrying a dirty old load in the window motors.

Aug 28, 2009 | 2006 Honda Accord

2 Answers

Power windows won't go down


you can open the switch and clean the contacts inside. or just call a technician to do it.

Jun 12, 2009 | 1996 Toyota Camry

2 Answers

Power Window wont go down


You need a new motor/window regulator.

Mar 10, 2009 | 1997 Dodge Grand Caravan

1 Answer

1994 Camry wagon, passenger side electric window.(front seat)


Can you hear the moter or do interior lights dim when pressing button? If so remove door panel and lubricate tracks and rolers using lithium grease lube only the tracks that do not come in contact with glass.

Check the connections at the switch and at the moter with a volt meter if there is power than time for a new moter. no power than check at drivers side switch. If no power there and fuse is ok you have a open in wires and will have to trace entire circut

Jan 20, 2009 | 1994 Toyota Camry

2 Answers

My Car wont start! Not ticking over at all


Is your battery in good condition?

Oct 29, 2008 | 2000 Volkswagen Golf

2 Answers

2003 mitsubishi eclipse rs driver side window


If the window won't go up and down at all the first thing to check is the sending switch on the doors. Use a simple voltage meter and place the leads on the pos and neg poles of the motor if your getting juice but no response then the motor is shot if your not getting juice to the motor diagnose up stream and usually just replace the up/down switch. Good Luck P.S.if the window motor is shot better try to find one at the bone yard cause when you call for prices at the dealership you will probably have an electrical short yourself!!!

Oct 20, 2008 | 2003 Mitsubishi Eclipse Coupe

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...