Question about 1993 Ford Mustang

1 Answer

Starter keeps running once the battery is hooked up need pictures to make sure its hooked up correctly 1993 ford mustang 2.3 liter manual transmission

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

You should have one wire comming off the battery to the solinoid and the other side to the starter. Then you will have either one or two small posts on the solinoid that small wires hook to. To start off leave the small wires off and see if you have the same problem-if so your solinoid needs replaced. If it doesn't start, go ahead and hook up one small wire, and if it sparks or tries to turn over put it on the other post. Then if no matter wich way you put them and it still tries to start, the problem is in the electrical part of your switch. I hope this helps.

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

1998 ford mustang no start just a single click


If the starter is clicking when you turn the key that means it is getting power. It could possibly be a bad new starter but before taking it out and testing check your battery and ground connections. Make sure they are clean by using some sand paper. There is also a ground wire that hooks to engine make sure it is hooked up and not corroded. Even though you bought a new battery make sure it is fully charged. Remember to remove the ground from battery before taking any positive wires off. Hope this helps.

Aug 30, 2014 | 1998 Ford Mustang

1 Answer

2003 mustang shuts off, had to jump start.


Have you checked your alternator? Watch the battery guage and see where it is when the car is running. If it's below the 1/2 way mark, you may not be getting enough voltage to keep the battery charged. Otherwise there may be a loose battery cable either at the battery or at the engine. Check the ground wire at the engine block and make sure the positive is tight at the starter. There is also an alternator fuse; check the owners manual for the location.

Dec 04, 2012 | 2003 Ford Mustang

1 Answer

Starting problems 1993 ford musting 2.3


i'm not sure what YOUR problem may be, but i have a '93 2.3L also. sometimes the ignition switch will work, but sometimes not. my solution was to run a hot wire from the battery to a 30 amp inline fuse, then to a momentary push-button switch, then to the hot side of the starter. not recommended as a permanent solution, just as a backup. make sure to use fairly heavy wire and switch. current should not exceed 30 amps but use wire and switch capable of carrying 30 amps and fuse just to be safe

Aug 11, 2010 | 1993 Ford Mustang

1 Answer

Need a wiring diagram for 1986 ford mustang 4cyl engine. Helping a friend with his 4cylinder mustang and when i installed the negative terminal on the battery then as i place the positive terminal it...


Hi!!

You may have the positive cable hooked in the wrong side of the starting selenoid or the starter selenoid is defective.

Follow the RED (+) cable from the battery, it goes to the starter selenoid wich has two terminals, change the cable to the other terminal, that should take care of the problem unless the selenoid is stuck on. Replacement runs about $15.

Don't forget to rate this post. Good Luck!!

Jul 06, 2010 | 1986 Ford Mustang

2 Answers

Where is the starter relay located in a 1993 ford mustang lx?


should be on the fire wall or neer the fender. but check for power at the starter first.relay usualy dont go bad

Mar 24, 2010 | 1993 Ford Mustang

1 Answer

Ford F-150 1999 5.4 Liter. I changed starter now truck shakes!!!


if it didn't shake before the starter change,and the black marks were not there before,you need to see if the positive cable is getting hot to the touch,double check the large battery cables going to starter that they are on correctly ,dont go by color of wire ,visually follow each wire to starter to make sure its a ground or hot one,last possibility
would be a dead short in starter.

Dec 16, 2009 | 1999 Ford F150 Regular Cab

1 Answer

1991 mustang 2.3l starter staying engaged


which solenoid did u replace? the one on the starter or the main on up top near the battery, those are the ones that stick closed and keep the starter engaged. here is a picture.
757d306.jpg

Mar 16, 2009 | 1991 Ford Mustang

1 Answer

1986 Mustang LX 4 cycl won't idle.


check all of the vaccum lines and the one behind the throttle body and the EGR valve and the vaccum pump.

Feb 08, 2009 | 1986 Ford Mustang

1 Answer

93 mustang 2.3 liter starter relay wiring


Yes, I would be glad to do that. It may take me a few days to do so but, I will.

iluvfords93

Aug 01, 2008 | 1993 Ford Mustang

1 Answer

2001 Ford Mustang won't start


FIRST check the connections to the battery to make sure they are CLEAN and TIGHT.. once that is certain then you are correct and need a starter.. they are very hard to replace unless you have a lift, not much room under there if laying on the ground...

Jun 28, 2008 | 2001 Ford Mustang

Not finding what you are looking for?
1993 Ford Mustang Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...