Question about 2000 Ford F150 Flareside SuperCab

1 Answer

All things in dash/steering wheel not correctly working

Yesterday Ford F150 4wd was fine. Today-Turn signals only work if steering wheel is tilted into up position. Radio works only in park-shift into drive and radio and all digital info turns off-shift into neutral and radio comes back on. 4wd light on dash ''clicks'' on/off randomly making the turn signal click noise.AC blower stays on even after truck is turned off. Winshield wipers turn off if steering wheel turns slightly. Ideas??????

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Mice? sounds like the wires may have been chewed on and shorting out.

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a turn signal switch on a 1989 Full Size Bronco, not a tilt wheel.


You will need to remove the steering wheel...using a steering wheel puller, or a harmonic balancer puller...the turn signal switch is under the steering wheel...unscrew hold downs, trace wire from turn signal switch to under the dash behind the brake pedal, disconnect the connector wire...re-install pulling wire up from floor to inside the steering wheel...sometimes tying the wire to another object, then pull through...hope this helps.

Oct 11, 2013 | 1989 Ford Bronco

2 Answers

Steering wheel moves up and down


You must take the steering wheel apart and tighten the bolts that hold the tilt joint together, a 4 hour job.

Jul 12, 2012 | 1999 Ford F150 Regular Cab

1 Answer

I have a 1998 ford explorer, The turn signals only work when you slam the tilt steering wheel all the way up and then you have to hold it there, Then once I let go the stop working...Please can anyone help...


Yes, you need a new turn signal switch. Tilt columns are kind of ******* switches for just the reasons you stated: Quick, forceful movements puts strain on wiring and switches..

Oct 21, 2011 | 1998 Ford Explorer

1 Answer

Had to replace battery yesterday. Today found that neither turn signals or brake lights work. Checked fuses and bulbs and relay...all seem to be in working condition..but still no signals..what could the...


First off, this is likely a coincidence more than something you did. The fault is going to lie in the multifunction switch(or turn signal switch) on the column. Do you need replacement instructions/diagrams? I will be happy to provide. These are fairly easy to replace. About 20 - 30 minutes for a novice. No steering wheel removal!!

Sep 04, 2010 | 2006 Ford Taurus

1 Answer

Where is the turn signal relay, hazard relay, and flasher for a 2003 Ford F150? My turn signals do not work (inside or outside), but 3 out of 4 outside lights work when the hazards are on, but with only 1...


It is not the flasher if the hazards work, it is 1 flasher for both turn signals and the hazard lamps. It is in a relay block ( along with the blower motor relay ) under the dash, about in line with the steering wheel column ).

Try tilting the steering wheel all the way up, and test again.

The other quick test is to cycle the hazard switch a few times, to see if it cleans the contacts for the turn signal on the MFS,

Apr 01, 2010 | 2003 Ford F150 Regular Cab

1 Answer

1992 Chevy C 1500 loose steering wheel loose


Rule is if it worked aside from the signal problem, you had someone work on it, and now it does not work, it's likely that the person that did the job needs to do it again! In every shop I ran, this sort of thing nearly never happened because things were checked over before a customer got it back, and whoever did the work had to correct it (at no pay).
Depending upon what you did to eliminate P/S, it could cause problems down the road,(manual steering boxes have lube inside...a drained power unit does not and will wear quickly) but not in either the tilt mechanism or the signal switch. Likely though you will develop larger biceps!!

Feb 12, 2010 | 1984 Chevrolet C1500

1 Answer

I need to know how the tilt mechanism works in an 85 F-150 tilt steering column.


push the turn signal lever to the dash and move the steering wheel.

Nov 25, 2009 | 1985 Ford F150

Not finding what you are looking for?
2000 Ford F150 Flareside SuperCab Logo

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...