Question about 2002 Ford SVT Focus

1 Answer

Ac clutch does not get power checked fuses and relays all look good. it will click if i jump power is there a known probleml. car sat for a year

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 2,030 Answers

Yep your Compressor clutch has gone bad.
You can either change the whole compressor, or just have the clutch changed on the compressor.
You are better off having the whole compressor changed; by the time you pay the labor to have it taken out, clutch changed, and reinstalled, you could have just paid for the new A/C compressor.

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a f150 1998 an in power distrubution there is no number 204 or ac clutch listed in manual what do i jump for the clutch to check


Unplug the clutch harness and use a voltmeter to check for power ( with the engine and a/c on-set to max)

Sep 02, 2016 | Ford F-150 Cars & Trucks

2 Answers

AC fuse and relay for 2001 Ford Expedition


Pull a relay out and use paper clip to jump. Usually cross corner. Watch compressor clutch and see if engages when key is turn ahead. Don't start car. If it does good. Now take alligator clips and check relay. Clip each wire to negative and positive battery post. Then clip negative to negative relay pin. And touch positive to correct pin. If it doesn't click do it another relay so you know your doing it right. If determined relay is good. And your compressor clutch did engage when testing it. You are low on freon.

Jul 11, 2016 | Ford Cars & Trucks

3 Answers

A/c why my compressor does notwork turn the shaft and turns freely do not get power to it and donot have fuse box identification for the fuses


first you should know that there is an electromagnetic clutch on the compressor and it is going to appear to be free turning unless there is power to it. Second is a switch that is in line with the power to the clutch and that switch opens and wont let power to the clutch if the Freon is low. Third is the fuse that you may be able to find a diagram for at autozone dot come. Make a free account and then login and put in the year make and model and go browse the free repair guides.

Feb 24, 2016 | 1995 Ford Escort

1 Answer

AC clutch not engauging. No power at plug. Fuse and relay are good. Where do I look next?


There are high and low pressure switches in the system to prevent the clutch from energizing if the system is low, or overcharged, or your cooling fans aren't coming on. You can jump your comp. just to verify that the clutch/coil is good to eliminate it as a problem. A/C button might be suspect, I doubt it. Ambient Air Temp Sensor (if equipped) could prevent clutch from engaging. Year, make, and model helps.

Oct 24, 2015 | AC Cars & Trucks

1 Answer

02 xterra 3.3 ac clutch only engages when jumped across at relay full of Freon relay AMD fuses are good


Check to see if you have power at your AC, then have to check to see if you have power and ground at relay pins, if not trace wires, also your relay could be bad to

May 15, 2014 | Cars & Trucks

1 Answer

97 chevy suburban AC clutch won't engage pressures


Looks like the low pressure switch gets power from a 10amp ac fuse. Power then goes to the ac relay which is powered on by the ac heat controller on the dash. Power then goes thru the high pressure switch to the compressor. The ac relay is grounded to the body. Do you have power on the lite and dark green wires going into the relay and is it grounded ?

Jul 26, 2013 | Cars & Trucks

1 Answer

What's your problem?ac compressor clutch has no power 95 blazer,all fuses are good,all relays are good,where do I look next?


make sure there is free-on in the system.{there has to be an ample amount of free-on in the system to turn on the compressor.}1. disconnect the high pressure switch. take a jumper wire and jump the pins. compressor should come on. if compressor comes on the switch is bad.

Jun 24, 2012 | Chevrolet Cars & Trucks

1 Answer

No power to AC clutch 1994 olds cutlass ciera 3.1 litre


Have you tired jumping the AC compressor low pressure switch?

May 25, 2012 | 1994 Oldsmobile Cutlass Ciera

3 Answers

Have no power to the ac compressor. all fuses and


SOUND LIKE AC COMPRESSOR CLUTCH COIL IS OPEN.ITS GETTING POWER YOU HAVE A OPEN COIL CIRCUIT.

May 27, 2010 | 2002 GMC Yukon Denali

2 Answers

The compressor is not engaging on 96 pontiac transport van


Check wires going into it from harness.. make sure there is no break.. If not have compressor checked at autozone or advanced auto.

Jul 04, 2009 | 1994 Pontiac Trans Sport

Not finding what you are looking for?
2002 Ford SVT Focus Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...