Question about 1997 Dodge Intrepid

1 Answer

What size is the nut holding on the rotor - 1997 Dodge Intrepid

Posted by on

  • yadayada
    yadayada May 11, 2010

    the rotor floats there is no nut retaining it, so what are you asking here? if this is the front that is the axle nut and has nothing to do with the rotor.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

That would be the hub nut, but it shouldn't need to be removed if just taking off rotor, are you aware of that?

Posted on Sep 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the bolt & nut size holding the rotor on the 2006 malibu ?


remove 2 phillips screw, unbolt caliper bracket w/ 17mm socket, use push bolt (12mm) to remove rotor if cannot be removed by hand

Nov 23, 2013 | 2006 Chevrolet Malibu

1 Answer

What size allen wrench for brake calipers on 2001 Dodge Dakota 2WD 3.9L and what size is the nut holding the rotor on? Standard or Metric?


a 7 mm hex head wrench for the caliper bolts. the nut that holds the bearings in place is usually a 1 inch or 1 1/16 inch, but a pair of pliers should be enough to take the nut off after the cotter pin is removed. when you put the nut back on DO NOT over tighten it or you will damage the wheel bearings.

Aug 07, 2011 | 2001 Dodge Dakota

1 Answer

Back brakes nut for holding rotors, size?


I'm assuming you want to remove the rear rotors. No rear brake rotor nut for holding the rotor on that I know off. I just had my rear rotors off and turned on my 94 Concorde LX.
After removing the tire I diligenty removed the star washers (2) from the lug studs. Then a little spray of PB Blaster around the center hub. Next I removed the 2 10mm bolts holding the caliper to the rotor. A slight nudge with a rubber mallet and the caliper is free, but do support it, don't let it dangle. Another slight nudge on the rotor with a rubber mallet and the rotor literally fell off the car.
There is a rear axle nut and bearing inside of the center hub that is secured by a large 34mm hex nut, on the outside of that a lock ring that looks like a large black bottle cap with a cotter pin going through it for retention. That has nothing to do with removing the rotors. With a little patience, lubricant and gentle tapping, the rotors slide off the center hub. Hope this helps.

Sep 02, 2010 | 1994 Chrysler Concorde

1 Answer

What is the socket size of the nut holding the front rotor on a 2005 toyota corolla? its not a hex nut but a 12 point socket?


the only things that are holding the rotor on is 1) the brake caliper which i believe has 2 14mm screws and 2) the brake caliper bracket which has 2 17mm screws holding it in place.once you remove these 2 parts,tap on the rotor( where the wheel goes bolted on )with a hammer and it should come off easily.if not spray some penetrant on the studs that hold the tire on, then tap on it some more and it should come off.hope this info helps.take care and good luck, manny

Apr 03, 2010 | 2005 Toyota Corolla

1 Answer

What is the size of the nut that holds the brake rotor on the 2002 honda accord


there is NO nut holding the rotors on, what you are looking at is the axel nut

Nov 06, 2009 | 2002 Honda Accord

1 Answer

2004 Pontiac Grand Prix Tyring to change rotor. What size nut holds the rotor on?


THe rotor is not held on by nut. If you are talking about taking the axle off and axle nut is abut 1 3/4 - 1 7/8

Sep 26, 2009 | 2004 Pontiac Grand Prix

1 Answer

What size is the main rotor nut on a 2003 bmw 325i I think its around 47mm


that would be the axle nut, not the rotor nut and it is 36MM 12 point., this does not have to be removed to remove the rotor!!!

May 23, 2009 | 2003 BMW 325

1 Answer

Front rotor nut


hi out of curiosity? are wanting to renew thebrake disc/rotor ? or the actual hub that rotor fits to ? as not usually necessary to have to remove hub to change rotor ? unless the rotor is bolted to hub from the rear ?

Nov 08, 2008 | 2004 Ford F150

1 Answer

Rotor


You do not need to pull the axle nut loose the rotor will slide off wheel hub assembly.you might need to tap it off if been on a long time.all that has to come off is the caliper

Aug 20, 2008 | 1998 Pontiac Grand Prix

Not finding what you are looking for?
1997 Dodge Intrepid Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...