Question about Ford F

2 Answers

Where to put gear box fluid in a ford mondeo 2002 automatic it takes a long time to change gear

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,124 Answers

The automatic transmission fluid goes in the same place where the Trani dipstick is.. It is called the filler tube.. Just use a funnel..

When checking the fluid - have the engine running in park..
Trani fluid is measured in pints not quarts on the dipstick..

The shifting problem might not be from low Trani fluid.. It could be caused by other things..

IF the fluid is low - that could cause the trani to slip and cause internal damage..

Good luck..

Posted on Sep 08, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

Same place you check the fluid level. Check with the vehicle parked on a level surface and check according to the manufactures rules. Normally you simply remove the fill plug and if you can touch fluid it is full. Read your owner's manual to be sure.

Posted on Sep 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford windstar won't reverse


Has the automatic transmission fluid and filter been changed. A flush and change is worth a try.

May 13, 2014 | 2002 Ford Windstar Cargo

1 Answer

88 bronco 2 automatic v6 will sometimes not go in any gear but if I'm lucky it will kick in and go can anyone tell me the problem


the problem was changing that fluid! rarely happen, but it will happen when people change transmission fluid on older car then the car messed up. when you change the fluid you washed all the friction material on the clutch surface by putting in new fluid.

Jan 23, 2014 | 1988 Ford Bronco II

1 Answer

Where is the automatic transmision filler or adding the fluid on 2006 ford explorer


Hi there.
You should take it back to either FORDS or any auto matic gear/box people and have it changed and refilled with new autotrans fluid

Jan 12, 2014 | 2006 Ford Explorer Sport Trac

1 Answer

Ive got ford mondeo tdci 54 plate.. ive just had the dual mass flywheel replaced but now the clutch is playing up it goes stiff and wont go into gear, could this be it needs clutch fluid??


Angela, I'll be honest I'm confused. It shows "problem with Toytoa Celica" but you mention a Ford Mondeo in your post. Just to be sure we're talking about a Ford Mondeo that had the flywheel replaced, correct? Chances are if they replaced the flywheel you normally would always replace the clutch disk with it. If this is a hydraulic clutch system you don't typically have to open the hydraulic system to swap out the flywheel and clutch on a car. This would lead me to believe clutch fluid isn't your answer, but I would at least make sure you check it. If they DID have to open the system the clutch needs to have the air bled out of the hydraulic lines.

Nov 24, 2012 | 2002 Toyota Celica

3 Answers

Hi! I have a ford mondeo automatic 2002 model. It looses power every time it changes gears especially from gear 2 to gear 3. The maximum speed that it does now is 40 km/hr but it starts well. Please help


HI,your ford may have gear problem which is common on ford mondeo,first check the gear oil if its reddish then your oil is ok and if its burnt like brown colour then you should change the gear oil as well the gear oil filter.

Mar 12, 2011 | 2002 Ford SVT Focus

1 Answer

The automatic gearbox on my mondeo 2002 changes gears but slips


In the engine compartment, you will need to locate the transmission dipstick. Usually on the left side of the motor, labeled "Trans fluid". Pull it out and check the fluid level. Your problem could be as simple as putting transmission fluid in it. That will make it slip. You fill the transmission right down the dipstick tube.

Mar 22, 2010 | 2002 Ford SVT Focus

2 Answers

I have locked my radio, but now know the code. anyway i can unlock it to put the code in now? (ford mondeo S reg)


I'm not sure about your mondeo but my ford falcon may be similar. It resets itself, the more times the wrong code has been put in, the longer it takes to reset.....hope this helps

Sep 13, 2009 | Ford Focus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...