Question about 1996 Mazda MX-6

1 Answer

My mx-6 misfires under load but responds when i ease the revs up

Slowley. i've changed the plugs,leads,dizzycap to no avail.could it be fuel filter injectors or timing belt. help would be grateful.ta

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

You either have a cross up on the plug wires or its out of time.

Posted on Sep 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is causing the P0300 random misfire code on my 2001 Mitsubishi montero limited (not sport)?


misfires are for faulty electrics ---plugs, HT leads, distributor coils ECM but they are also from low fuel pressure , faulty injectors, faulty injector wiring
now you say at 5300 rpms is at the top end range so items to check are the fuel pressure ( should be at around 55-65 psi constant) fuel flow (filters , EVAP venting problem
Plugs with excessive gap, Low quality HT leads or faulty leads --excessive resistance is stopping spark at high pulses
ignition control module --failing at high cycles and coil or coils not good enough to handle the high cycles
If you have a distributor , then it may be worn bushes in the distributor that is initiating the misfire by not running true in the housing causing the rotor button to be missing spark for certain leads

May 12, 2016 | Cars & Trucks

1 Answer

Misfiring in cylinder 6 so i changed the plugs and now I'm looking at the fuel filter


have you checked the HT Lead? or if is the coil failure? Also check if there is not any fault on the previous - if the injector on that cylinder is working correct and not pouring the fuel.Since you removed the spark plugs have you checked if No:6 was wet or dry?

Jan 02, 2013 | 2001 Nissan Maxima

1 Answer

1999 Passat bogs under load and seems to be misfiring. Could it be the fuel filter or the ignition sensor and how do you test/replace?


very unlikely to be fuel filter. misfires on petrol engines are usual down to the ignition system,possibly Plugs or leads if fitted. plugs should be replaced every 40,000 miles, not an expensive item either.

Feb 23, 2010 | 1999 Volkswagen Passat

1 Answer

ENGINE REVING WHEN ACCELERATING PAST 4K REVS WITH NO POWER


the computer will not let it rev over 4k due to rev limiter.

Aug 05, 2009 | 1989 Mazda MX-6

1 Answer

Engine misfire? Not changing gear.


check your coils and plugs , fuel filter and air filter

Jun 16, 2009 | 2000 Jaguar S-Type

1 Answer

1992 gen 1 mx6 mazda 6cyl.hesitation ,misfire,flatspot.replaced plugs,leads,rotor cap,fuel filter etc


Probably gunk or carbon build-up. See if Seafoam works for you, do a full engine treatment. You can find out how to do it on Youtube follow the links.

May 11, 2009 | 1992 Mazda MX-6

1 Answer

My jag runs ok on idle and misfires under load


do a compression test ?? about 180lbs anything less and it could need a valve regrind ,if compression seems ok then plugs and leads and use the bosch plugs with the 3 electrodes (for voltswagon) champion are **** and missfire.if still persists change dist cap and leads

Jan 17, 2009 | 1988 Jaguar XJ6

Not finding what you are looking for?
1996 Mazda MX-6 Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...