Question about 2001 Dodge Durango

1 Answer

The warning light to re-fill the container comes on but the reservoir is full.

Posted by on

  • darjd Sep 08, 2009

    i'm sorry. The warning light is for the washer fluid, not the coolant.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 574 Answers

I assume your talking about the coolant tank. If so look around the bottom of the tank and see if there is a plug going to the tank if so unplug it and see if light goes out. Im not sure if the low coolant switch is in the tank or not

Posted on Sep 08, 2009

  • roberta3fan Sep 08, 2009

    Ok, check the washer tank around the bottom and see if there is a plug if so unplug and see if light goes out

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

02 Ford Explorer sporttrac xlt. New rotors calipers pads and master cylinder. Bled it twice stream looks good new fluid. One day breaks stick then the next no breaks Break light on Proportional valve?


For some reason these vehicles you need to bleed brakes several times, had same problem, so air hangs up in lines somewhere it apears. When you say brakes sticks, describe it better, locked up, or dragging on rotors?
CERACOAT-NANOTECH.com

Apr 21, 2015 | 2002 Ford Explorer Sport Trac

1 Answer

Brake reservoir leaking?


Clean up any oil leaks.
Have someone sit in the car and depress the pedal while you check around for leaks.
You need to check all brake lines, and calipers etc.
Locate your leak and repair or replace parts as necessary.

Nov 13, 2012 | 2000 Toyota Tundra

2 Answers

Engine Coolant container empty...Fill with Prestone??


sure,. sounds like a good plan to me.,. you may want to also inspect to be sure it's not broken or otherwise cracked. and fill the the respective level line (when engine is cold or hot). You may be able to simply use a 50-50 prestone blend or full strenght if the existing coolant is low on antifreeze depending upon your needs climate-wise...
Ck

Feb 13, 2011 | 1992 Pontiac Sunbird

1 Answer

Where is the windshield washer motor located? Is it near the heater motor? I had mine fixed and now the heat comes out of the dash for the defroster


Windshield Washer Pump Removal & Installation To Remove:
  1. Remove the air cleaner assembly.
  2. Remove the bolts. windwash.gif

  3. Position the pump and reservoir aside.
  4. Disconnect the electrical connectors.
  5. Disconnect the washer hose.
  6. Remove the pump and reservoir.
  7. Remove the washer pump.
washpump.gif

WARNING
Windshield washer solution contains methanol which is poisonous. Observe all cautions and warnings indicated on label of washer solution container.
NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.
To Install:
WARNING
Windshield washer solution contains methanol which is poisonous. Observe all cautions and warnings indicated on label of washer solution container.
  1. Install washer pump in reservoir.
  2. Install washer pump reservoir assembly.
  3. Connect washer hose.
  4. Connect washer electrical connector.
  5. Install air cleaner assembly.
---
The windshield wiper fluid pump is located in the tank which is not in the heater motor or defroster area in the dash.

The defroster/heat control door is located in the dash board area:

Air Door Actuators, Cables or Motors Removal & Installation Air Inlet Door Vacuum Control Motor To Remove:
  1. Remove the instrument panel lower insulator cover.
  2. Disconnect the vacuum connector.
  3. Remove the control arm clip and the spring.
  4. Remove the nuts and the air inlet door vacuum control motor.
Air inlet door vacuum motor mounting screws for-10-00-245.gif

To Install:
  1. Install the vacuum motor on the mounting bracket.
  2. Connect the control arm and spring.
  3. Connect the vacuum hose to the vacuum motor.
  4. Install the lower instrument panel lower cover.
Floor Defrost Door Vacuum Control Motor To Remove:
  1. Disconnect the negative battery cable.
  2. Remove the left lower dash insulator panel and disconnect the lamp.
  3. Remove the two pin-type retainers and remove the fill panel.
  4. Remove the DLC mounting screws.
  5. Detach the vacuum line.
  6. Remove the lighting module.
  7. Remove the screws and the bracket.
  8. Remove the floor/defrost door vacuum control motor.
Floor/Defrost vacuum motor mounting screws for-10-00-246.gif

To Install:
  1. Connect the vacuum lines and install the floor/defrost vacuum motor.
  2. Install the bracket and lighting control module.
  3. Install the DLC bracket and mounting screws.
  4. Install the fill panel.
  5. Install the left lower dash insulator panel.
  6. Connect the negative battery cable.
Panel Door Vacuum Control Motor To Remove:
  1. Remove the instrument panel.
  2. Reach through the door opening and remove the pin.
  3. Disconnect the panel door vacuum control motor vacuum line.
  4. Remove the screws and remove the panel door vacuum control motor.
To Install:
  1. Install the panel door vacuum motor.
  2. Connect the vacuum line to the panel door motor.
  3. Reach through the opening and install the pin to the linkage.
  4. Install the instrument panel.
prev.gif next.gif

Jan 19, 2011 | 2003 Mercury Grand Marquis

1 Answer

Where do i put brake fluid ?


The brake fluid is to be filled in the brake fluid reservoir.The brake fluid reservoir is fitted on the master cylinder with separate chambers for the primary and secondary circuits.
In cars with a manual gearbox, the brake fluid reservoir serves as the reservoir for brake fluid used in clutch system. A brake fluid level switch is mounted on the brake fluid reservoir. The Level switch contains a float magnet which affects a reed element that closes an electric circuit and warns the driver regarding the condition.The master brake cylinder, which is mounted on the brake servo unit, contains a secondary
and primary piston.
---------- This will help.thanks.Helpmech.

Nov 12, 2010 | 2003 Saab 9-3

2 Answers

Just had the water pump and serpentine belt fixed and now my "low coolant" light just came on. what does this mean?


Hi:
That warning light comes on when the level of coolant in the plastic reservoir tank becomes low. It is possible that the tank just needs topped off after the work on your car was performed. Basically, check the coolant and fill as needed, then keep an eye on your level to make sure there are no leaks on your vehicle since it was worked on.

Mar 25, 2010 | 1996 Saab 900

2 Answers

Low coolant light is on with full radiator


Check the coolant top up reservoir. Low coolant sensor is usually in the overflow/reserve container.
Wash out and clean any dirt or corrosion from the sensor prong.
Refill to correct level with fresh coolant, then recheck alarm operation.

Jul 17, 2009 | 1997 Pontiac Sunfire

2 Answers

Where is the drain valve on 2002 dodge caravan radiator?


its a pitcock facing the cab bottom of the radiator, plastic flat. once you find the pitcock just put a bucket underneath and turn it.then refill. if you want to flush(run fluid thru to clean it out) the radiator id suggest taking it in. you dont have to flush it every time you change the coolant out.

Mar 28, 2009 | 2002 Dodge Caravan

1 Answer

Dont have user manual for 2001 2 door sport diesel warning light bottom right corner of dash yellow radiator icon has come on and dont know what it signifies as coolant level is correct etc


possibly check radiator no leaks first then check coolant bottle reservoir if not full fill up with 50/50 water /coolant then tajke the cap off the radiator/ turn the car on and fill the radiator it will burp until its full then putr cap on and the coolant reservoir cap on then check to see if the light is on/ Please rate my response thank you very much

Dec 24, 2008 | 2001 Jeep Cherokee

Not finding what you are looking for?
2001 Dodge Durango Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...