Question about 1995 Geo Tracker

2 Answers

Can not get car to pass inspection

96 geo metro. car says 1.0 motor but has 4 cylinder calls for three cylinder .have reserched cannot find where motor has been changed.computer says one thing car says another.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

YOU ARE very confused.
geo then tracker.
what do you have ,

a 4wd UTV or a econobox sedan.

CARFAX

Posted on Oct 22, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,187 Answers

Copy the VIN (Vehicle Identification Number) and go to the Chevy/Geo website to determine what the original engine was.
If you try a service like "AutoCheck", you may be able to determine when / where the engine was swapped, if at all.

Hope this helps!

Posted on Sep 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How I adjust valve on 96 Geo Metro 3 cylinders?


You need to replace the valve came bearing for that valve if it's a Suzuki 1.0 engine. Easy to do.

Feb 12, 2015 | 1996 Geo Metro

2 Answers

How much oil goes in a 92 geo metro three cylinders.


buy 4 qt.
fill to top mark,
always buy extra oil, so you can keep it full , im sure any 92 burns oil,tad more than new.
or if you drive fast , it sure will burn more.
fsm quote 3.7qt


25354906-sckxypulg1bw0dyocx0nmtbh-2-0.jpg

Jan 04, 2015 | 1992 Geo Metro

1 Answer

My geo metro does not want to shift from second to third real well.


a/T trans,
does it fail to shift to 3rd with light throttle and flat ground moving say 45mph? Y/N.
trans diagnosis is complex , so is the trans.
it a hands on deal too, with tools.
1: is modulator valve working?
2: is Kickdown cable not stuck at WOT?
3: is filter screen clean?
4: is A/T pump pressure at spec.?
the car has an FSM and in this book , as a section called, on car repairs. for A/T . its 100% on topic.

Feb 27, 2013 | 1992 Geo Metro

1 Answer

Were is spark plug number 1 at on my 3 cylinder geo metro


On GM inline engines,cylinder #1 is the one closest to the front(pulley)end of the engine. If you pulled the wires off the distributor/coil pack,and don't know where they go,put one wire one at a time and crank it.If it doesn't backfire,repeat until it starts.(this is only easy on 4 cylinder or smaller engines)

Jan 01, 2012 | 1992 Geo Metro

1 Answer

Can you take the motor for 1997 geo metro and put it in 1997 saturn sl2 ?


the metro is either a 3 or 4 cylinder japanese mitsubishi engine and has nothing in common with the 4 cylinder GM 1.9L 4. so you would have to manufacture new mounts, and electrical and mechanical connections for everything. assuming you have those skills, the car would be underpowered.
compare the size of the tiny metro with the small saturn. look in a junkyard for a 96-98 saturn engine which will bolt right in. note the donor vehicle must match the donee vehicle in engine a SOHC or DOHC.

Oct 19, 2010 | 1997 Saturn SC

3 Answers

Where is starter located on 96 geo metro?


85d10dd.jpg

Starter motor assembly

In here can find one guide about replace the Starter in a Geo Metro

Dec 07, 2009 | 1996 Geo Metro

1 Answer

What road blocks will I have putting a 1993 1.0 L geo metro engine and ecm into a 1997 geo metro?


I don't know if it will physically bolt in or much about either motor really. However, most states have an emissions inspection that requires hooking a computer up to the OBDII connector. Installing an OBDI engine and ecm into an OBDII car won't allow you to pass inspection and is technically illegal. The other way around, would be fine as far as inspection anyway.

Oct 28, 2009 | 1997 Geo Metro

1 Answer

1997 metro 3 cyl. misses on no.3


inspect the engine for arching from ignition wire to the engine ground on number three cylinder listen for a zapping sound . turn engine off and make sure the wire connections are solid then retry if it fixes the problem

Jun 22, 2009 | 1993 Geo Metro

Not finding what you are looking for?
1995 Geo Tracker Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...